Opened 14 years ago
Closed 11 years ago
#8653 closed defect (obsolete)
AIO/AHCI faults, Sol-11-Exp panic, VBox hang
Reported by: | varboxer | Owned by: | |
---|---|---|---|
Component: | other | Version: | VirtualBox 4.0.4 |
Keywords: | Cc: | ||
Guest type: | other | Host type: | other |
Description (last modified by )
I was running virtualbox 3.2.10 on Win7x64 host, Solaris-11-Express guest with two extra raw physical hard disks mounted as a zfs mirror.
All was well for some time until one day I started a scrub and came back to find: i) a panic in Solaris, and ii) virtualbox would not close.
After that Solaris was not bootable! It would always panic (ahci:ahci_watchdog_handler?) and cause virtualbox to become faulty (unable to close due to VERR_VM_INVALID_VM_STATE).
I moved the two physical SATA disks from a virtual SAS connection to a virtual SATA connection with no luck.
I was subsequently able to boot Solaris without the two disks attached though.
I then upgraded virtualbox to 4.0.4 and was able to boot with the two disks attached to a virtual SATA connection, however I got a great many errors from Solaris and virtualbox (SYNCHRONIZE CACHE command failed).
It seems there's some interaction between a Solaris 11 Express guest and VirtualBox which is causing errors in both. I'm almost certain a Solaris 10 guest never had these problems but now I've upgraded my zpool version I can't revert to Solaris 10 :-(
text on screen when solaris panics:
fsb: 0 es: 4b trp: e cs: 30 ss: 0 gsb: fffffffffbc304e0 ds:4b err: 2 rfl: 10286 rip: fffffffff7ae48d8 rsp: ffffff00028f5930
unix:die+dd unix:trap+1799 unix:cmntrap+e6 ahci:ahci_add_doneq+18 ahci:ahci_mop_commands+aca ahci:ahci_timeout_pkts+2d2 ahci:ahci_watchdog_handler+2d5 genunix:callout_list_expire+77 genunix:callout_expire+31 genunix:callout_execute+1e [genunix:taskq_thread+248] seen first time not second unix:thread_start+8 seen first time: panic[cpu0]/thread=ffffff00028f5c40: panic dump timeout dump aborted: please record the above information!
VBox.log :
40:09:53.637 AIOMgr: I/O manager 0x000000072027e0 encountered a critical error (rc=VERR_UNRESOLVED_ERROR) during operation. Falling back to failsafe mode. Expect reduced performance 40:09:53.638 AIOMgr: Error happened in D:\tinderbox\win-3.2\src\VBox\VMM\PDMAsyncCompletionFileNormal.cpp:(1654){pdmacFileAioMgrNormal} 40:09:53.638 AIOMgr: Please contact the product vendor 40:14:38.486 OHCI: USB Reset 40:14:38.486 OHCI: Software reset 40:14:38.486 EHCI: USB Suspended 40:14:38.497 EHCI: Hardware reset 40:14:38.507 EHCI: Hardware reset 40:14:38.507 Changing the VM state from 'RUNNING' to 'RESETTING'. 40:14:38.508 GMM: Statistics: 40:14:38.508 Allocated pages: 5006d 40:14:38.508 Maximum pages: 5009c 40:14:38.508 Ballooned pages: 0 40:14:38.528 CPUMSetGuestCpuIdFeature: Enabled APIC 40:14:38.528 CPUMSetGuestCpuIdFeature: Disabled x2APIC 40:14:38.528 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0) 40:14:38.530 Audio: set_record_source ars=0 als=0 (not implemented) 40:14:38.530 PIIX3 ATA: Ctl#1: finished processing RESET 40:14:38.530 PIIX3 ATA: Ctl#0: finished processing RESET 133:10:53.796 VMR3Reset: 133:10:53.796 RUNNING -> RESETTING, SUSPENDED -> RESETTING, RUNNING_LS -> RESETTING_LS failed, because the VM state is actually RESETTING 133:10:53.797 VMSetError: D:\tinderbox\win-3.2\src\VBox\VMM\VM.cpp(3144) vmR3TrySetState; rc=VERR_VM_INVALID_VM_STATE 133:10:53.805 VMSetError: VMR3Reset failed because the current VM state, RESETTING, was not found in the state transition table 133:10:53.805 ERROR [COM]: aRC=VBOX_E_VM_ERROR (0x80bb0003) aIID={6375231a-c17c-464b-92cb-ae9e128d71c3} aComponent={Console} aText={Could not reset the machine (VERR_VM_INVALID_VM_STATE)} aWarning=false, preserve=false
Solaris errors:
mpt_get_sas_device_page0 header: IOCStatus=0x22, IOCLogInfo=0x0 Disconnected command timeout mpt_flush_target discovered non-NULL command in slot XX tasktype 3
Solaris errors when a guest inside v4.0.4 : WARNING: /pci@0,0/pci8086,2829@d/disk@0,0 (sd0): SYNCHRONIZE CACHE command failed (5)
That is repeated MANY times.
VBox.log in v4.0.4 :
00:01:07.864 AIO/win: Request 0x000000071f9710 returned rc=VERR_UNRESOLVED_ERROR (native 1117 00:01:07.864 )AioMgr0-N: Request 0x0000001428a920 failed with rc=VERR_UNRESOLVED_ERROR, migrating endpoint \.\PhysicalDrive0 to failsafe manager. 00:01:07.864 AIO/win: Request 0x000000071f9690 returned rc=VERR_UNRESOLVED_ERROR (native 1117 00:01:07.864 )AsyncCompletion: Task 0x0000000745e0c0 completed after 15 seconds 00:01:07.944 AsyncCompletion: Task 0x00000007198280 completed after 19 seconds 00:01:24.972 AHCI#1: Read at offset 206338335744 (131072 bytes left) returned rc=VERR_UNRESOLVED_ERROR 00:01:24.972 AsyncCompletion: Task 0x00000007198100 completed after 36 seconds ... 00:01:25.784 AHCI#1: Flush returned rc=VERR_INVALID_FUNCTION 00:01:25.836 AHCI#1: Flush returned rc=VERR_INVALID_FUNCTION 00:01:25.888 AHCI#1: Flush returned rc=VERR_INVALID_FUNCTION
That message repeated MANY times
Attachments (2)
Change History (3)
by , 14 years ago
Attachment: | VBox-3.2.10.log added |
---|
comment:1 by , 11 years ago
Description: | modified (diff) |
---|---|
Resolution: | → obsolete |
Status: | new → closed |
VBox 3.2.10 log