VBoxSVC.exe crashes on USB attach/detach to Guest

[A20_user]

Vista Host, XP Guest Attached USB card reader and USB mouse to Guest, only USB not USB2 controller enabled. Disabled the mouse, it reappeared under Host control, but Host reported a "Sun xVM VirtualBox Interface" does no longer work. Guest was still working, but showed no USB devices in its list. I cleanly shut down Guest. The main GUI was still working, but believes Guest still "Running". There is no hint in Machine log about problem. Found this in Windows Event log, which should be the match according to file description: Fehlerhafte Anwendung VBoxSVC.exe, Version 1.0.0.1, Zeitstempel 0x48bee051, fehlerhaftes Modul VBoxDDU.dll, Version 0.0.0.0, Zeitstempel 0x48bedf20, Ausnahmecode 0xc0000005, Fehleroffset 0x0001b874, Prozess-ID 0x9cc, Anwendungsstartzeit 01c90f85be876c84.

Restarted Host. GUI believes at least Guest is "Powered off", ok. Same procedure for USB mouse, same problem, basically same log: Fehlerhafte Anwendung VBoxSVC.exe, Version 1.0.0.1, Zeitstempel 0x48bee051, fehlerhaftes Modul VBoxDDU.dll, Version 0.0.0.0, Zeitstempel 0x48bedf20, Ausnahmecode 0xc0000005, Fehleroffset 0x0001b874, Prozess-ID 0xac4, Anwendungsstartzeit 01c90faf39d1b9ac.

Mouse and card reader drivers are Microsoft. VMware Player drivers are on the Host, too, but Player is not running.

Just terminated VirtualBox, started it again. Mouse and card reader are not enabled. Try to enable card reader, V.B. gives error "Failed to attach the USB device ..." - I hate to type everything from dialog just because Copy does not work - ... is busy with a previous request, Result code: E_INVALIDARG (0x80070057), Component: HostUSBDevice, Interface: IHostUSBDevice ..., Callee: IConsole.

Same error for mouse. Same error for card reader after unplug and reconnect.

Host restart. Mouse and card reader show again their checkmarks and are assigned to Guest. This time I uncheck the card reader. Still no crash. Uncheck mouse, still no crash. Checkmark card reader again, crash, exactly the same crash code and error offset.

When starting the main GUI, a log entry appears: Fehler bei der usbperf-Datensammlung. Die Collect-Funktion wurde mit einem nicht unterstützten Abfragetyp aufgerufen. English, raw translation: Error at usbperf data collection. The collect function has been called with an unsupported request type.

Such entries seem to reappear as long as main GUI is running, but not necessarily all 2 minutes.

[Dieter Fauth]

Very similar effects seen on 1.6.6

[Frank Mehnert]

There was a fix in 2.2.0 which could address this issue. Please reopen this ticket if this problem still exists with VirtualBox 2.2.2.