Support for STMXCSR instruction: VERR_IEM_INSTR_NOT_IMPLEMENTED

[Mop]

VirtualBox crashes at a predictable point during the installation of Microsoft Visual C++ Resitributable (x64) version 12.0.21005 via the Visual Studio Community Installer.

The machine crashes every time the package tries to install. I have tested with the latest development version and found it was unable to open a session for the virtual machine let alone boot it.

The host is an Intel Macbook Pro circa 2009 and the guest is Windows 7 x64 SP1.

The issue appears to be that the stmxcsr instruction defined in the Intel 80/86 istruction set is not yet implemented in VirtualBox. I am also aware that this instruction is being used more often in windows 10 software so this issue may become worse over time.

I would be very appreciative if you could implement the instruction as it is causing me a small nightmare since I rely on VirtualBox for my work.

[Mop]

VBox Log file for the crash and PNG view in a zip file

[awang]

Got the same thing when installing Cygwin on an 8.1 guest. I'm on a mid-2012 Retina Pro.

[dcampbell]

I'm having this same error in 5.1.8. The VM works okay for me until I install the 5.1.8 guest additions and then it will no longer fully load the desktop in Windows. I see the desktop and a couple of seconds later it crashes. VBox.log from one of the crashes is attached. This is on a MacBook Pro 17" Early 2009. Guest is Windows 7 x64 SP1. At the point of this log, Windows was patched up to about January 2016.

[dcampbell]

VBox.log of guru crash

[dcampbell]

I was able to get around this error by disabling the "Enable Nested Paging" option on the VM settings. System::Acceleration::Enable Nested Paging. After unchecking that, my VM booted properly and hasn't crashed for almost 20 hours.

[Marcello Romani]

I am seeing this error while trying to install vmware ESXi 6.5

VirtualBox version: Version 5.1.14 r112924 (Qt5.6.2)

I have disabled nested paging but that didn't make a difference. The problem surfaces only when I assign 2 CPUs to the virtual machine. If I only assign 1 CPU, the installer goes on fine. It then stops at the end as it requires 2 CPUs.

[matte]

I'm seeing this same error and a VM crash on a Mac host with a Win10 VM: VERR_IEM_INSTR_NOT_IMPLEMENTED

00:34:49.756337  FF: 00 00 00
00:34:49.756349 !!
00:34:49.756350 !! {vgagr}
00:34:49.756350 !!
00:34:49.756355 VGA Graphics Controller (3CF): GR index 3CE:05
00:34:49.756360  GR00:00 GR01:00 GR02:00 GR03:00 GR04:00 GR05:50 GR06:05 GR07:0F GR08:FF
00:34:49.756407 !!
00:34:49.756408 !! {vgapl}
00:34:49.756409 !!
00:34:49.756413 read mode     : 0     write mode: 0
00:34:49.756421 set/reset data: 00    S/R enable: 00
00:34:49.756429 color compare : 00    read map  : 0
00:34:49.756436 rotate        : 0     function  : 0
00:34:49.756444 don't care    : 0F    bit mask  : FF
00:34:49.756451 seq plane mask: 0F    chain-4   : on
00:34:49.756459 !!
00:34:49.756459 !! {vgasr}
00:34:49.756460 !!
00:34:49.756464 VGA Sequencer (3C5): SR index 3C4:04
00:34:49.756469  SR00:03 SR01:00 SR02:0F SR03:00 SR04:0A
00:34:49.756496 !!
00:34:49.756496 !! {vgatext}
00:34:49.756497 !!
00:34:49.756501 Not in text mode!
00:34:49.756504 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
00:34:49.756541 emR3Debug: rc=VERR_IEM_INSTR_NOT_IMPLEMENTED

[BjoAce]

Same problem here with a VM running a MS SQL Server Express 2012 App (Linear Vereinsverwaltung Premium, a VPN Client). It crashes sometimes, mostly over night.

Host: Mac Mini Mid 2010, macOS Sierra 10.12.3, Core 2 Duo 2,4Ghz, 16 GB DDR3 1067 RAM, 250 GB SSD, VirtualBox 5.1.14 r112924 (QT5.6.2), hibernate is disabled, connected to a Panasonic TV via HDMI which I power off if not needed Guest: Windows 7 Pro with latest updtes, 1 Core, 4GB RAM, 64 MB Graphics Memory, disabled Audio, bridged network, guest additions installed without Direct3D, guest folder on local ssd CPU limit 100%, Paravirtualization legacy, PAE / NX off, nested paging off

Sometimes I access the host via TeamViewer. Now I'll check how to attach a log...

[BjoAce]

Log file for my comment

[BjoAce]

Any news?

[BjoAce]

Solved it with the forum user's help. Solution for those who find this: Managed to downgrade the VirtualBox installation (including tools etc) to v5.0.32 r112930. Over the last 3 days, the problem didn't occur anymore. And I could run the installer I noticed below...

[Frank Mehnert]

Sorry, no fix yet. VBox 5.1.x depends a bit more on the nested paging feature, at least on Mac OS X. But this will be fixed eventually.

[Socratis]

At least there's a workaround for now. I'm not bitten by that bug personally, I simply have seen the issue come up more often with the adoption of 5.1.x. And I'm taking this as a chance to Cc: myself to the ticket...

[Marcello Romani]

I can confirm that after downgrading from 5.1.x to 5.0.32 I did not see the VERR_IEM_INSTR_NOT_IMPLEMENTED error any more.

Another issue has come up though:

HARDWARE_VIRTUALIZATION WARNING: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS

Installation went on nonetheless but eventually stopped with:

Unable to successfully execute 'tryFormatDevice' after 3 tries

Tried different SCSI controllers, to no avail.

[Socratis]

Replying to virtualtux:

Another issue has come up though:

@virtualtux: the bug report discussions are specific to each bug. If you have questions/problems/issues, please go to the forums and open an appropriate thread in an appropriate forum. If it is deemed to be a bug (95% are not), then you could open an appropriate bug report.

[Frank Mehnert]

Should be fixed in 5.1.22.