Opened 13 years ago
Last modified 9 years ago
#7736 reopened defect
SATA disks not found after reboot into linux — at Initial Version
Reported by: | Mike Musterd | Owned by: | |
---|---|---|---|
Component: | other | Version: | VirtualBox 3.2.10 |
Keywords: | Cc: | ||
Guest type: | Linux | Host type: | Windows |
Description
Situation:
- I have a IDE hdd with a linux installation on it, as well as grub.
- I have a IDE cdrom with an image of windows XP on it.
- I have a SATA hdd with windows XP on it, or nothing
I want to boot the linux OS, which will determine if the windows XP partition is available and has booted correctly. If this is the case, a grub-reboot is issued to boot into windows XP once, otherwise the image is restored onto the HDD. If I reboot from windows XP, the linux OS should do the above again.
On an actual machine, the procedure works without a hitch.
However after a reboot from windows XP to linux (Start | Shut Down... | Restart) the linux suddenly can't find the SATA disks.
dmesg has the following lines: [ 6.166426] ata1.00: qc timeout (cmd 0xec) [ 6.166426] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 6.516437] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 16.517619] ata1.00: qc timeout (cmd 0xec) [ 16.517619] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 16.517619] ata1: limiting SATA link speed to 1.5 Gbps [ 16.866406] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 46.866424] ata1.00: qc timeout (cmd 0xec) [ 46.866424] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 47.216399] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 47.566424] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 52.566425] ata2.00: qc timeout (cmd 0xec) [ 52.566425] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 52.916425] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.916398] ata2.00: qc timeout (cmd 0xec) [ 62.916398] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 62.916398] ata2: limiting SATA link speed to 1.5 Gbps [ 63.266424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 93.266437] ata2.00: qc timeout (cmd 0xec) [ 93.266437] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 93.616439] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Attached is the full vbox.log and the full dmesg as I have it.
vbox log