4 | | |
5 | | 1. Open settings for any guest |
6 | | 2. Select "Serial Ports" in left pane |
7 | | 3. Check "Enable Serial Port" |
8 | | 4. For Port Mode, select "Host Pipe" and note that status reads "Invalid settings detected" |
9 | | 5. Uncheck "Enable Serial Port" |
10 | | 6. Note that the OK button is grayed out. |
| 4 | 1. Open settings for any guest |
| 5 | 2. Select "Serial Ports" in left pane |
| 6 | 3. Check "Enable Serial Port" |
| 7 | 4. For Port Mode, select "Host Pipe" and note that status reads "Invalid settings detected" |
| 8 | 5. Uncheck "Enable Serial Port" |
| 9 | 6. Note that the OK button is grayed out. |