VirtualBox

Changes between Version 2 and Version 3 of TracIni


Ignore:
Timestamp:
Jun 2, 2023 10:32:55 AM (18 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracIni

    v2 v3  
    1 = The Trac Configuration File =
     1= The Trac Configuration File
    22
    33[[TracGuideToc]]
     4[[PageOutline(2-5,Contents,pullout)]]
    45
    5 Trac configuration is done by editing the '''`trac.ini`''' config file, located in `<projectenv>/conf/trac.ini`.  Changes to the configuration are usually reflected immediately, though changes to the `[components]` or `[logging]` sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present.
     6Trac is configured through the **`trac.ini`** file, located in the `<projectenv>/conf` directory. The `trac.ini` configuration file and its parent directory should be writable by the web server.
    67
    7 The `trac.ini` configuration file should be writable by the web server, as Trac currently relies on the possibility to trigger a complete environment reload to flush its caches.
     8Trac monitors the timestamp of the file to trigger an environment reload when the timestamp changes. Most changes to the configuration will be reflected immediately, though changes to the `[components]` or `[logging]` sections will require restarting the web server. You may also need to restart the web server after creating a [#GlobalConfiguration global configuration] file when none was previously present.
    89
    9 == Global Configuration ==
     10== Global Configuration
    1011
    11 In versions prior to 0.11, the global configuration was by default located in `$prefix/share/trac/conf/trac.ini` or /etc/trac/trac.ini, depending on the distribution. If you're upgrading, you may want to specify that file to inherit from.  Literally, when you're upgrading to 0.11, you have to add an `[inherit]` section to your project's `trac.ini` file. Additionally, you have to move your customized templates and common images from `$prefix/share/trac/...` to the new location.
    12 
    13 Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows:
    14 {{{
     12Configuration can be shared among environments using one or more global configuration files. Options in the global configuration will be merged with the environment-specific options, with local options overriding global options. The global configuration file is specified as follows:
     13{{{#!ini
    1514[inherit]
    1615file = /path/to/global/trac.ini
    1716}}}
    18 Multiple files can be specified using a comma-separated list.
     17Multiple files can be specified using a comma-separated list. Non-absolute paths are relative to the Environment `conf` directory.
    1918
    20 Note that you can also specify a global option file when creating a new project,  by adding the option `--inherit=/path/to/global/trac.ini` to [TracAdmin#initenv trac-admin]'s `initenv` command.  If you do not do this but nevertheless intend to use a global option file with your new environment, you will have to go through the newly generated `conf/trac.ini` file and delete the entries that will otherwise override those set in the global file.
     19Note that you can also specify a global option file when creating a new project, by adding the option `--inherit=/path/to/global/trac.ini` to [TracAdmin#initenv trac-admin]'s `initenv` command. If you specify `--inherit` but nevertheless intend to use a global option file with your new environment, you will have to go through the newly generated `conf/trac.ini` file and delete the entries that will otherwise override those in the global file.
    2120
    22 There are two more entries in the [[#inherit-section| [inherit] ]] section, `templates_dir` for sharing global templates and `plugins_dir`, for sharing plugins. Those entries can themselves be specified in the shared configuration file, and in fact, configuration files can even be chained if you specify another `[inherit] file` there.
     21There are three more options in the [#inherit-section "[inherit]"] section, [#inherit-templates_dir-option templates_dir] for sharing global templates, [#inherit-htdocs_dir-option htdocs_dir] for sharing global htdocs and [TracIni#inherit-plugins_dir-option plugins_dir], for sharing plugins. Those options can be specified in the shared configuration file, and in fact, configuration files can even be chained if you specify another `[inherit] file` there.
    2322
    24 Note that the templates found in the `templates/` directory of the TracEnvironment have precedence over those found in `[inherit] templates_dir`. In turn, the latter have precedence over the installed templates, so be careful about what you put there, notably if you override a default template be sure to refresh your modifications when you upgrade to a new version of Trac (the preferred way to perform TracInterfaceCustomization being still to write a custom plugin doing an appropriate `ITemplateStreamFilter` transformation).
     23Note that the templates found in the `templates/` directory of the TracEnvironment have precedence over those found in `[inherit] templates_dir`. In turn, the latter have precedence over the installed templates, so be careful about what you put there. Notably, if you override a default template, refresh your modifications when you upgrade to a new version of Trac. The preferred way to perform TracInterfaceCustomization is to write a custom plugin doing an appropriate `ITemplateStreamFilter` transformation.
    2524
    2625== Reference for settings
    2726
    28 This is a brief reference of available configuration options, and their default settings.
     27This is a reference of available configuration options, and their default settings.
     28
     29Documentation improvements should be discussed on the [trac:MailingList#Trac-dev trac-dev mailing list] or described in a [trac:NewTicket ticket]. Even better, [trac:TracDev/SubmittingPatches submit a patch] against the docstrings in the code.
    2930
    3031[[TracIni]]
    3132
    32 == Reference for special sections
    33 [[PageOutline(3,,inline)]]
     33== Configure Error Reporting
    3434
    35 === [components] === #components-section
    36 This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to `enabled` or `on` will enable the component, any other value (typically `disabled` or `off`) will disable the component.
     35The error reporting page has a //Create// button for reporting
     36issues. The site to which issues are reported depends on the
     37configuration of the Trac site and the user’s permissions.
    3738
    38 The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.
     39If the user doesn’t possess TRAC_ADMIN, the site to which a user is directed to create a ticket is determined by the [[#project-admin_trac_url-option|"[trac] admin_trac_url"]] setting:
    3940
    40 Consider the following configuration snippet:
    41 {{{
    42 [components]
    43 trac.ticket.report.ReportModule = disabled
    44 webadmin.* = enabled
    45 }}}
     41* If empty, there will be no //Create// button.
     42* If set to the default value (`.`), the ticket will be
     43  created on the site which the error occurred.
     44* Otherwise the ticket will be created at the site pointed
     45  to by `admin_trac_url`.
    4646
    47 The first option tells Trac to disable the [wiki:TracReports report module]. The second option instructs Trac to enable all components in the `webadmin` package. Note that the trailing wildcard is required for module/package matching.
     47If [[#project-admin-option|"[project] admin"]] is not empty, the administrator's email address will be rendered on the error page.
    4848
    49 See the ''Plugins'' page on ''About Trac'' to get the list of active components (requires `CONFIG_VIEW` [wiki:TracPermissions permissions].)
    50 
    51 See also: TracPlugins
    52 
    53 === [milestone-groups] === #milestone-groups-section
    54 ''(since 0.11)''
    55 
    56 As the workflow for tickets is now configurable, there can be many ticket states,
    57 and simply displaying closed tickets vs. all the others is maybe not appropriate
    58 in all cases. This section enables one to easily create ''groups'' of states
    59 that will be shown in different colors in the milestone progress bar.
    60 
    61 Example configuration (the default only has closed and active):
    62 {{{
    63 closed = closed
    64 # sequence number in the progress bar
    65 closed.order = 0
    66 # optional extra param for the query (two additional columns: created and modified and sort on created)
    67 closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime
    68 # indicates groups that count for overall completion percentage
    69 closed.overall_completion = true
    70 
    71 new = new
    72 new.order = 1
    73 new.css_class = new
    74 new.label = new
    75 
    76 # one catch-all group is allowed
    77 active = *
    78 active.order = 2
    79 # CSS class for this interval
    80 active.css_class = open
    81 # Displayed label for this group
    82 active.label = in progress
    83 }}}
    84 
    85 The definition consists in a comma-separated list of accepted status.
    86 Also, '*' means any status and could be used to associate all remaining
    87 states to one catch-all group.
    88 
    89 The CSS class can be one of: new (yellow), open (no color) or
    90 closed (green). New styles can easily be added using the following
    91 selector:  `table.progress td.<class>`
    92 
    93 === [repositories] === #repositories-section
    94 
    95 (''since 0.12'' multirepos)
    96 
    97 One of the alternatives for registering new repositories is to populate the `[repositories]` section of the trac.ini.
    98 
    99 This is especially suited for setting up convenience aliases, short-lived repositories, or during the initial phases of an installation.
    100 
    101 See [TracRepositoryAdmin#Intrac.ini TracRepositoryAdmin] for details about the format adopted for this section and the rest of that page for the other alternatives.
    102 
    103 === [svn:externals] === #svn:externals-section
    104 ''(since 0.11)''
    105 
    106 The TracBrowser for Subversion can interpret the `svn:externals` property of folders.
    107 By default, it only turns the URLs into links as Trac can't browse remote repositories.
    108 
    109 However, if you have another Trac instance (or an other repository browser like [http://www.viewvc.org/ ViewVC]) configured to browse the target repository, then you can instruct Trac which other repository browser to use for which external URL.
    110 
    111 This mapping is done in the `[svn:externals]` section of the TracIni
    112 
    113 Example:
    114 {{{
    115 [svn:externals]
    116 1 = svn://server/repos1                       http://trac/proj1/browser/$path?rev=$rev
    117 2 = svn://server/repos2                       http://trac/proj2/browser/$path?rev=$rev
    118 3 = http://theirserver.org/svn/eng-soft       http://ourserver/viewvc/svn/$path/?pathrev=25914
    119 4 = svn://anotherserver.com/tools_repository  http://ourserver/tracs/tools/browser/$path?rev=$rev
    120 }}}
    121 With the above, the `svn://anotherserver.com/tools_repository/tags/1.1/tools` external will be mapped to `http://ourserver/tracs/tools/browser/tags/1.1/tools?rev=` (and `rev` will be set to the appropriate revision number if the external additionally specifies a revision, see the [http://svnbook.red-bean.com/en/1.4/svn.advanced.externals.html SVN Book on externals] for more details).
    122 
    123 Note that the number used as a key in the above section is purely used as a place holder, as the URLs themselves can't be used as a key due to various limitations in the configuration file parser.
    124 
    125 Finally, the relative URLs introduced in [http://subversion.tigris.org/svn_1.5_releasenotes.html#externals Subversion 1.5] are not yet supported.
    126 
    127 === [ticket-custom] === #ticket-custom-section
    128 
    129 In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.
    130 
    131 === [ticket-workflow] === #ticket-workflow-section
    132 ''(since 0.11)''
    133 
    134 The workflow for tickets is controlled by plugins.
    135 By default, there's only a `ConfigurableTicketWorkflow` component in charge.
    136 That component allows the workflow to be configured via this section in the trac.ini file.
    137 See TracWorkflow for more details.
     49If the user possesses TRAC_ADMIN, the //Create// button will direct the user to report the issue on trac.edgewall.org. If the error was generated in a plugin, the error will be reported to the project URL provided that the plugin author has included the project URL in the plugin installation data. The user possessing TRAC_ADMIN also sees a traceback and system information on the error page.
    13850
    13951----
    140 See also: TracGuide, TracAdmin, TracEnvironment
     52See also: TracAdmin, TracEnvironment

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette