VirtualBox

Ticket #8970 (new defect)

Opened 3 years ago

Last modified 18 months ago

Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_DECOMPRESSION)

Reported by: azerger Owned by:
Priority: minor Component: other
Version: VirtualBox 4.0.8 Keywords:
Cc: Guest type: Windows
Host type: Windows

Description

Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_DECOMPRESSION)

occurs in v4.08

have a virtual world that is frozen in time with virtualbox guest additions service disabled in vw. when a restore is done, this error now appears. used to be able to freeze time on vb machine a few versions back without problems and save its state then restore etc. unable to do this now without getting an error on the restore state. very problematic. seems like there's some new check that flags the vw when the date is out of sync possibly and its keeping the vw from being restored.

thank you, art

Attachments

VBox.log Download (72.4 KB) - added by azerger 3 years ago.

Change History

Changed 3 years ago by azerger

comment:1 Changed 3 years ago by jacek2v

Hi,

I have the same error (not always):
Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_DECOMPRESSION).
Kod wyniku (RC): NS_ERROR_FAILURE (0x80004005)
Komponent: Console
Interfejs: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}

Version: VirtualBox 4.1.4
Host: LInux
Guest: Windows XP

comment:2 Changed 2 years ago by kristofferalpsjo

I have the same error - always.

Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_REC_TERM_CRC).

Resultatkod: NS_ERROR_FAILURE (0x80004005) Komponent: Console Gränssnitt: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}

Host: OSX Guest: Win 7 Home Premium

comment:3 Changed 2 years ago by rober1s

Same error here.

Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_REC_TERM_CRC)

Version 4.1.6 r74713 Host: 64-bit Linux Mint 11 Guest: Windows XP

comment:4 Changed 2 years ago by sun_shine

For me the same error message when restoring VM after successfully saving machine state:

Failed to open a session for the virtual machine fc12.
Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_REC_TERM_CRC).

Result Code: 
NS_ERROR_FAILURE (0x80004005)
Component: 
Console
Interface: 
IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}
00:00:00.767 PCI: ...
00:00:05.161 AssertLogRel /home/vbox/vbox-4.1.4/src/VBox/VMM/VMMR3/'''SSM.cpp'''(5824) int '''ssmR3DataReadRecHdrV2(SSMHANDLE*)''': TermRec.u32StreamCRC == u32StreamCRC
00:00:05.161 0xef0de13, 0xc8f0f86a
00:00:05.161 '''SSM: LoadExec failed for 'pgm' instance #1 (version 14, pass 0xffffffff): VERR_SSM_INTEGRITY_REC_TERM_CRC'''
00:00:05.161 VMSetError: /home/vbox/vbox-4.1.4/src/VBox/VMM/VMMR3/SSM.cpp(8149) int ssmR3LoadExecV2(VM*, SSMHANDLE*); rc=VERR_SSM_INTEGRITY_REC_TERM_CRC
00:00:05.161 VMSetError: '''Failed to load unit 'pgm''''
00:00:05.161 NAT: ...

Version: VirtualBox-4.1-4.1.4_74291_fedora14-1.x86_64, Host: Linux fc14 2.6.35.6-45.fc14.x86_64, Guest: fc12

comment:5 Changed 2 years ago by jacek2v

Hi,

I found the source of the problem - it was ... HDD !!! I replaced the HDD and problem disappeared :)

Issue is closed for me. Regards

comment:6 Changed 23 months ago by MAx1234-ITA

Same problem here with version 4.1.16 and all the previous i've tried: I started in 2010 with v. 3.2.4, the problem appeared for the first time when I updated to v.4.0. and since then, i face it every time I decide to update.

The strange thing is that it starts occuring *ONLY after i've upgraded* VirtualBox from an older to a newer version. The workaround is to create a new VM using the same virtual hard disks... so this is discouraging from updating VirtualBox to newer versions (personal opinion).

My environment: Host: Win XP Sp3, 2GB RAM on AMD Core2 Duo; VM: Win XP SP3 , 640 MB RAM, single CPU; It uses two virtual HDDs, both of them located on an external removable (USB) hard disk; In addition, a number of shared folders on the host is mapped as network drives for remote storage purpose.

Here follows the message i get every time i try to resume from a seved state, hope it helps... --- " Apertura di una sessione per la Macchina Virtuale WinXP_VB6 non riuscita.

Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_DECOMPRESSION).

Codice 'uscita: E_FAIL (0x80004005) Componente: Console Interfaccia: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} "

Of course, if I discard the saved machine and start it from power-off state, all works great.

Best regards,

Massimo - Italy

Another little "discovery":

Procedure 1)

  • Close the VM with "Save machine status" option
  • Wait a couple minutes
  • Launch the saved VM and wait for it to become operational.
  • All is working fine!

Procedure 2)

  • Close the VM with "Save machine status" option
  • Wait a couple minutes
  • Hybernate the PC and go home
  • Go back to the office the day after and resum the PC
  • Launch the saved VM and wait for it to become operational.
  • Error is present

Regards, MAx

Last edited 22 months ago by MAx1234-ITA (previous) (diff)

comment:7 Changed 21 months ago by Mark L

I had the same problem. Tried reusing the HDD, but the new VM had the same problem, as well.

Went back to the original VM, discarded the saved state, rebooted, and windows came up in repair mode. This worked for me.

VBox: 4.1.18 r78361 Host: MacBook 10.7 Guest: Windows 7

comment:8 Changed 18 months ago by Chelmite

Occurs in 4.2 also.

I ran fsck on the Linux host. It didn't find any problems.

I get the error: Failed to open a session for the virtual machine Windows7.

Failed to load unit 'pgm' (VERR_SSM_INTEGRITY_DECOMPRESSION).

Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {db7ab4ca-2a3f-4183-9243-c1208da92392}

Last edited 18 months ago by Chelmite (previous) (diff)

comment:9 Changed 18 months ago by Chelmite

If I run virtualbox from a Linux shell, I get the following output:

Error opening file for reading: Permission denied
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "" under id 16 
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "&Pause" under id 17 
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "&Reset" under id 18 
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "D&iscard saved state..." under id 24 
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Re&fresh..." under id 25 
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Show in File Manager" under id 27 
Qt WARNING: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Create Shortcut on Desktop" under id 28 

comment:10 Changed 18 months ago by Chelmite

I removed the saved state and it now works.

Note: See TracTickets for help on using tickets.

www.oracle.com
ContactPrivacy policyTerms of Use