id,summary,reporter,owner,description,type,status,component,version,resolution,keywords,cc,guest,host 8385,Can't boot from Secondary Master/Slave IDE,Batman,,"I have created VM with Windows XP guest OS (my host OS is Windows 7). It's main virtual hdd connected to primary master IDE. My host's CD-drive is connected to primary slave. Everything works fine. I have bootable USB-flash disk with DOS installed. Using VBoxManage.exe i created vmdk-file that map my USB-flash to virtual HDD. Next i connect it to my VM as secondary master IDE. But i can't boot from this drive! Durin startup i press F12 (to enter boot menu), than select Secondary Master and get error message: '''Start booting from USB device... Boot disk failure''' But my USB-flash is definitely bootable! (see VBox1.log attached) Then i remove all my drives from VM and connect only USB-flash as primary master. And boot was successful. Next i add back my main virtual hdd (with winxp installed) as primary slave. And i can't boot from this slave. Only primary master IDE is bootable! I created another VM (DOS-type) with another VDI-file (but i did not install DOS there because did not want to waste time) connected as primary master. My host's DVD-ROM connected as primary slave. USB-flash vmdk file connected as secondary master. The problem persists (see VBox2.log attached) - i can't boot from secondary master (or any slave). PS: the same problem i have with my external bootable USB-HDD (not flash). My VirtualBox version is 4.0.4 r70112.",defect,closed,virtual disk,VirtualBox 4.0.4,fixed,secondary slave,,Windows,Windows