Opened 17 years ago
Closed 10 years ago
#707 closed defect (obsolete)
Mac osx 10.4.9 running virtual box ,win xp crashes or hangs on startup
| Reported by: | markymark | Owned by: | |
|---|---|---|---|
| Component: | other | Version: | VirtualBox 1.5.0 |
| Keywords: | Cc: | ||
| Guest type: | other | Host type: | other |
Description
sometimes starts ok but crashes every time now,logs attached only the splash screen then black screen.
Attachments (4)
Change History (9)
by , 17 years ago
| Attachment: | 2007-09-18-11-11-36.051-VirtualBoxVM-2085.log added |
|---|
comment:1 by , 16 years ago
| Resolution: | → fixed |
|---|---|
| Status: | new → closed |
comment:2 by , 15 years ago
| Resolution: | fixed |
|---|---|
| Status: | closed → reopened |
I am still getting this problem on my iMac (core duo) with Mac OS X 10.4.11 and VirtualBox 2.10.
My Windows XP image hangs during loading (splash screen or black screen before login). VirtualBox then sits there holding 100% CPU. This usually happens soon after mouse integration comes on. I've tried switching the SATA controller, ACPI, IO APIC, VT-x and PAE/NX on and off with no effect (windows is not using ACPI or the APIC HAL). It hangs in average 2 out of 3 times I try to start up the machine from the menu. Sending a reset signal (Host+R) and then selecting "continue to load windows as normal" sorts it out after 1 or 2 attempts. Windows then loads quite quickly and operates adequately for the remainder of the session. Upon shutdown, OS X reports that VirtualBoxVM has crashed.
I'm attaching two log files (one for a machine powered off after it hung up during loading and one that was reset until loading was successful) and the crash report generated by OS X. Both attempts were carried out with ACPI, IO APIC VT-x disabled, SATA enabled.
by , 15 years ago
| Attachment: | windows xp-2009-01-18-21-56-26.log added |
|---|
Windows XP hangs in splash screen
by , 15 years ago
| Attachment: | windows xp-2009-01-18-22-00-26.log added |
|---|
Windows XP hangs, is then reset, loads successfully and is then shutdown; VirtualBoxVM is reported to crash
by , 15 years ago
| Attachment: | VirtualBox crash report.rtf added |
|---|
Mac OS X crash report for VirtualBoxVM
comment:3 by , 15 years ago
I forgot to mention that my Windows XP image was ported over from VMWare Fusion. I have followed all the steps recommended here in the wiki but mouse is still detected as VMware input device inside windows.
comment:4 by , 15 years ago
I had this same issue just now, also with a ported VMWare image. Until I realized that I had created a new virtual machine with a copy of the harddrive, and I forgot to "Enable IO APIC" in the virtual machine settings.
I hope this helps...
comment:5 by , 10 years ago
| Resolution: | → obsolete |
|---|---|
| Status: | reopened → closed |
Try again with 1.6.x please and reopen if necessary.