Context Navigation

Changes between Version 10 and Version 11 of Ticket #17225, comment 18

-              v10
+              v11
 The base test had all auxiliary features disabled (usb, serial, optical, networking, drag and drop, clipboard sharing and so on).
 DPCs/ISRs would take in the region of 300-500 micro-seconds (idle), with frequent spikes to 5ms and in some cases taking as much as 40-50ms when under load.
+DPCs/ISRs would take in the region of 300-500 micro-seconds (idle), with frequent spikes to 5ms (idle), and up to 40-50ms (w/ 200ms peaks!) when under load.
 When the audio input was turned off the DPCs/ISRs would range between 100-350 microseconds, with spikes at 500 microseconds, and peaks of 5-10ms when under load.
+When the audio input was turned off the DPCs/ISRs would range between 100-350 microseconds (idle), with spikes at 500 microseconds (idle), and peaks of 5-10ms when under load.
 So it looks like the audio interrupts may need some tweaking, and the CPU clock-rates corrected - 1200MHz is a lot of cycles going down the drain. With that said, some general refractoring and code optimisation may also be due across the board.