Changeset 501 in kBuild for vendor/gnumake/current/doc/Makefile.in

Timestamp:

Sep 15, 2006 2:30:32 AM (18 years ago)

Author:

bird

Message:

Load make-3.81/ into vendor/gnumake/current.

File:

• vendor/gnumake/current/doc/Makefile.in (modified) (18 diffs)

vendor/gnumake/current/doc/Makefile.in

@@ -1 @@
-# Makefile.in generated by automake 1.8.2 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -16 +16 @@
 
 # -*-Makefile-*-, or close enough
+# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under the
+# terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 2, or (at your option) any later version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+# A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# GNU Make; see the file COPYING.  If not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
@@ -36 +51 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
 subdir = doc
 DIST_COMMON = $(make_TEXINFOS) $(srcdir)/Makefile.am \
-        $(srcdir)/Makefile.in
+        $(srcdir)/Makefile.in $(srcdir)/stamp-vti \
+        $(srcdir)/version.texi
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
@@ -68 +85 @@
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 DVIPS = dvips
-am__installdirs = $(DESTDIR)$(infodir)
+am__installdirs = "$(DESTDIR)$(infodir)"
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
@@ -139 +156 @@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
+WINDOWSENV_FALSE = @WINDOWSENV_FALSE@
+WINDOWSENV_TRUE = @WINDOWSENV_TRUE@
 XGETTEXT = @XGETTEXT@
 ac_ct_CC = @ac_ct_CC@
@@ -148 +167 @@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
@@ -216 +237 @@
 
 .texi.info:
-        restore=: && \
-        backupdir="$(am__leading_dot)am$$$$" && \
+        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
         am__cwd=`pwd` && cd $(srcdir) && \
         rm -rf $$backupdir && mkdir $$backupdir && \
-        for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-          if test -f $$f; then \
-            mv $$f $$backupdir; \
-            restore=mv; \
-          fi; \
-        done; \
+        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+          done; \
+        else :; fi && \
         cd "$$am__cwd"; \
         if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
@@ -237 +256 @@
           $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
         fi; \
-        rm -rf $$backupdir; \
-        exit $$rc
+        rm -rf $$backupdir; exit $$rc
 
 .texi.dvi:
@@ -251 +269 @@
 
 .texi.html:
-        $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-         -o $@ $<
-        if test ! -d $@ && test -d $(@:.html=); then \
-          mv $(@:.html=) $@; else :; fi
-$(srcdir)/make.info: make.texi $(make_TEXINFOS)
-make.dvi: make.texi $(make_TEXINFOS)
-make.pdf: make.texi $(make_TEXINFOS)
-make.html: make.texi $(make_TEXINFOS)
+        rm -rf $(@:.html=.htp)
+        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+         -o $(@:.html=.htp) $<; \
+        then \
+          rm -rf $@; \
+          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+            mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+        else \
+          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+          exit 1; \
+        fi
+$(srcdir)/make.info: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.dvi: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.pdf: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.html: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: make.texi $(top_srcdir)/configure
+        @(dir=.; test -f ./make.texi || dir=$(srcdir); \
+        set `$(SHELL) $(top_srcdir)/config/mdate-sh $$dir/make.texi`; \
+        echo "@set UPDATED $$1 $$2 $$3"; \
+        echo "@set UPDATED-MONTH $$2 $$3"; \
+        echo "@set EDITION $(VERSION)"; \
+        echo "@set VERSION $(VERSION)") > vti.tmp
+        @cmp -s vti.tmp $(srcdir)/version.texi \
+          || (echo "Updating $(srcdir)/version.texi"; \
+              cp vti.tmp $(srcdir)/version.texi)
+        -@rm -f vti.tmp
+        @cp $(srcdir)/version.texi $@
+
+mostlyclean-vti:
+        -rm -f vti.tmp
+
+maintainer-clean-vti:
+        -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
 .dvi.ps:
+        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
         $(DVIPS) -o $@ $<
 
 uninstall-info-am:
-        $(PRE_UNINSTALL)
+        @$(PRE_UNINSTALL)
         @if (install-info --version && \
              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
@@ -269 +315 @@
           for file in $$list; do \
             relfile=`echo "$$file" | sed 's|^.*/||'`; \
-            echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
-            install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
+            echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+            install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
           done; \
         else :; fi
@@ -278 +324 @@
           relfile=`echo "$$file" | sed 's|^.*/||'`; \
           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
-          (if cd $(DESTDIR)$(infodir); then \
-             echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
+          (if cd "$(DESTDIR)$(infodir)"; then \
+             echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
            else :; fi); \
@@ -351 +397 @@
 all-am: Makefile $(INFO_DEPS)
 installdirs:
-        $(mkdir_p) $(DESTDIR)$(infodir)
+        for dir in "$(DESTDIR)$(infodir)"; do \
+          test -z "$$dir" || $(mkdir_p) "$$dir"; \
+        done
 install: install-am
 install-exec: install-exec-am
@@ -372 +420 @@
 
 distclean-generic:
-        -rm -f $(CONFIG_CLEAN_FILES)
+        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
@@ -403 +451 @@
 install-info-am: $(INFO_DEPS)
         @$(NORMAL_INSTALL)
-        $(mkdir_p) $(DESTDIR)$(infodir)
+        test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
         list='$(INFO_DEPS)'; \
@@ -416 +464 @@
             if test -f $$ifile; then \
               relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
-              echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
-              $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
+              echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
+              $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
             else : ; fi; \
           done; \
@@ -427 +475 @@
           for file in $$list; do \
             relfile=`echo "$$file" | sed 's|^.*/||'`; \
-            echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile";\
-            install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile || :;\
+            echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+            install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
           done; \
         else : ; fi
@@ -438 +486 @@
         -rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
-        maintainer-clean-generic
+        maintainer-clean-generic maintainer-clean-vti
 
 mostlyclean: mostlyclean-am
 
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
 
 pdf: pdf-am
@@ -460 +508 @@
         install-man install-strip installcheck installcheck-am \
         installdirs maintainer-clean maintainer-clean-aminfo \
-        maintainer-clean-generic mostlyclean mostlyclean-aminfo \
-        mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
-        uninstall-info-am
+        maintainer-clean-generic maintainer-clean-vti mostlyclean \
+        mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
+        pdf-am ps ps-am uninstall uninstall-am uninstall-info-am