VirtualBox

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/Config.kmk@ 67954

Last change on this file since 67954 was 66812, checked in by vboxsync, 7 years ago

IEM: clearly mark operands that are written to.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 39.5 KB
Line 
1# $Id: Config.kmk 66812 2017-05-05 18:48:33Z vboxsync $
2## @file
3# kBuild Configuration file for VirtualBox Boot Sector Kit 3.
4#
5
6#
7# Copyright (C) 2010-2016 Oracle Corporation
8#
9# This file is part of VirtualBox Open Source Edition (OSE), as
10# available from http://www.virtualbox.org. This file is free software;
11# you can redistribute it and/or modify it under the terms of the GNU
12# General Public License (GPL) as published by the Free Software
13# Foundation, in version 2 as it comes in the "COPYING" file of the
14# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16#
17# The contents of this file may alternatively be used under the terms
18# of the Common Development and Distribution License Version 1.0
19# (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20# VirtualBox OSE distribution, in which case the provisions of the
21# CDDL are applicable instead of those of the GPL.
22#
23# You may elect to license modified versions of this file under the
24# terms and conditions of either the GPL or the CDDL or both.
25#
26
27VBOX_BOOTSECTORS_CONFIG_KMK_INCLUDED = 1
28
29# Include the parent configure file.
30ifndef VBOX_VALIDATIONKIT_CONFIG_KMK_INCLUDED
31 include $(PATH_ROOT)/src/VBox/ValidationKit/Config.kmk
32endif
33
34# Add our 32-bit and 64-bit C properties.
35KBUILD_COMPILE_CATEGTORIES += C32 C64
36PROPS_TOOLS += C32TOOL C64TOOL
37PROPS_SINGLE += C32TOOL C64TOOL C32OBJSUFF C64OBJSUFF
38PROPS_ACCUMULATE_R += C32FLAGS C64FLAGS C32DEFS C64DEFS
39PROPS_ACCUMULATE_L += C32INCS C64INCS
40
41if 0 # Adding as few as possible new properties.
42KBUILD_COMPILE_CATEGTORIES += C16
43PROPS_TOOLS += C16TOOL
44PROPS_SINGLE += C16TOOL C16OBJSUFF
45PROPS_ACCUMULATE_R += C16FLAGS C16DEFS
46PROPS_ACCUMULATE_L += C16INCS
47endif
48
49# Add noarch to the architectures list (will be there by default in a new kBuild).
50KBUILD_ARCHES += noarch
51
52
53# The bootsector directory.
54VBOX_PATH_BOOTSECTORS_SRC = $(VBOX_PATH_VALIDATIONKIT_SRC)/bootsectors
55
56# The bs3kit source directory.
57VBOX_PATH_BS3KIT_SRC = $(VBOX_PATH_BOOTSECTORS_SRC)/bs3kit
58
59
60# The 16-bit code & data segment classes.
61if 1
62BS3KIT_CLASS_CODE16 = CODE
63BS3KIT_SEGNM_DATA16 =
64BS3KIT_CLASS_DATA16 = DATA
65BS3KIT_GRPNM_DATA16 = DGROUP
66BS3KIT_CLASS_BSS16 = BSS
67else
68BS3KIT_CLASS_CODE16 = BS3CLASS16CODE
69BS3KIT_SEGNM_DATA16 = BS3DATA16
70BS3KIT_CLASS_DATA16 = FAR_DATA
71BS3KIT_GRPNM_DATA16 = BS3DATA16_GROUP
72BS3KIT_CLASS_BSS16 = ???
73endif
74
75
76##
77# Macro for generating near-call aliases for one 16-bit C function.
78# @param 1 The target name.
79# @param 2 The common function.
80BS3KIT_FN_GEN_CMN_NEARSTUB = $(evalcall2 def_Bs3KitGenNearStubSource,$1,_$2_c16,_$2_f16)
81
82##
83# Macro for generating near-call aliases for one 16-bit C mode function.
84# @param 1 The target name.
85# @param 2 The mode function.
86BS3KIT_FN_GEN_MODE_NEARSTUB = $(foreach suff, \
87 _rm \
88 _pe16 \
89 _pe16_v86 \
90 _pe32_16 \
91 _pev86 \
92 _pp16 \
93 _pp16_v86 \
94 _pp32_16 \
95 _ppv86 \
96 _pae16 \
97 _pae16_v86 \
98 _pae32_16 \
99 _paev86 \
100 _lm16 \
101 ,$(evalcall2 def_Bs3KitGenNearStubSource,$1,_$2$(suff),_$2$(suff)_far))
102
103# @param 1 The target name.
104# @param 2 The near function name.
105# @param 3 The far function name.
106define def_Bs3KitGenNearStubSource
107$1_SOURCES += $$($1_0_OUTDIR)/stub$2.asm
108$1_CLEAN += $$($1_0_OUTDIR)/stub$2.asm
109$$$$($1_0_OUTDIR)/stub$2.asm: $$(VBOX_PATH_BOOTSECTORS_SRC)/Config.kmk | $$$$(dir $$$$@)
110 $(QUIET)$(APPEND) -tn $$@ \
111 '%include "bs3kit.mac"' \
112 'BS3_BEGIN_TEXT16' \
113 ' extern $3' \
114 'BS3_BEGIN_TEXT16_NEARSTUBS' \
115 'BS3_GLOBAL_NAME_EX $2, function, 6' \
116 ' pop ax' \
117 ' push cs' \
118 ' push ax' \
119 ' jmp $3 wrt CGROUP16'
120endef
121
122
123##
124# Macro for generating far-call aliases for zero or more 16-bit C or assembly functions.
125# @param 1 The target name.
126# @param 2 The common function.
127# @param 3 The parameter size in bytes.
128BS3KIT_FN_GEN_CMN_FARSTUB = $(evalcall2 def_Bs3KitGenFarStubSource,$1,$2,_f16,_c16,$3)
129
130##
131# Macro for generating far-call aliases for zero or more 16-bit C mode functions.
132# @param 1 The target name.
133# @param 2 The mode function.
134# @param 3 The parameter size in bytes.
135BS3KIT_FN_GEN_MODE_FARSTUB = $(foreach suff, \
136 _rm \
137 _pe16 \
138 _pe16_v86 \
139 _pe32_16 \
140 _pev86 \
141 _pp16 \
142 _pp16_v86 \
143 _pp32_16 \
144 _ppv86 \
145 _pae16 \
146 _pae16_v86 \
147 _pae32_16 \
148 _paev86 \
149 _lm16 \
150 ,$(evalcall2 def_Bs3KitGenFarStubSource,$1,$2,$(suff)_far,$(suff),$3))
151
152# @param 1 The target name.
153# @param 2 The function name.
154# @param 3 The far function suffix.
155# @param 4 The near function suffix.
156# @param 5 The parameter size in bytes.
157define def_Bs3KitGenFarStubSource
158$1_SOURCES += $$($1_0_OUTDIR)/stub_$2$3.asm
159$1_CLEAN += $$($1_0_OUTDIR)/stub_$2$3.asm
160$$$$($1_0_OUTDIR)/stub_$2$3.asm: $$(VBOX_PATH_BOOTSECTORS_SRC)/Config.kmk | $$$$(dir $$$$@)
161 $(QUIET)$(APPEND) -tn $$@ \
162 '%include "bs3kit.mac"' \
163 'BS3_BEGIN_TEXT16' \
164 ' extern _$2$4' \
165 'BS3_BEGIN_TEXT16_FARSTUBS' \
166 'BS3_PROC_BEGIN _$2$3' \
167 ' CPU 8086' \
168 ' inc bp' \
169 ' push bp' \
170 ' mov bp, sp' \
171 '%assign offParam $5' \
172 '%rep $5 / 2' \
173 ' push word [bp + 2 + 4 + offParam - 2]' \
174 '%assign offParam offParam - 2' \
175 '%endrep' \
176 ' call _$2$4' \
177 ' add sp, $5' \
178 ' pop bp' \
179 ' dec bp' \
180 ' retf' \
181 'BS3_PROC_END _$2$3' \
182 ''
183endef
184
185
186#
187# Tools Tools Tools
188# Tools Tools Tools
189# Tools Tools Tools
190#
191
192ifdef VBOX_USE_KSUBMIT
193 VBOX_BS3KIT_KSUBMIT_OBJ_CONV := kmk_builtin_kSubmit --
194else
195 VBOX_BS3KIT_KSUBMIT_OBJ_CONV :=
196endif
197
198# Dummy CP "linker" tool.
199TOOL_VBoxBsCpLd = Dummy copy linker.
200TOOL_VBoxBsCpLd_LINK_MISCBIN_OUTPUT =
201TOOL_VBoxBsCpLd_LINK_MISCBIN_DEPEND =
202TOOL_VBoxBsCpLd_LINK_MISCBIN_DEPORD =
203define TOOL_VBoxBsCpLd_LINK_MISCBIN_CMDS
204 $(CP) -- $(objs) $(othersrc) "$(out)"
205endef
206
207# Dummy exit 1 "linker" tool.
208TOOL_VBoxBsUnusedLd = Dummy unused linker.
209TOOL_VBoxBsUnusedLd_LINK_MISCBIN_OUTPUT =
210TOOL_VBoxBsUnusedLd_LINK_MISCBIN_DEPEND =
211TOOL_VBoxBsUnusedLd_LINK_MISCBIN_DEPORD =
212define TOOL_VBoxBsUnusedLd_LINK_MISCBIN_CMDS
213 echo "cannot use this template for linking"
214 exit 1
215endef
216
217# NASM tool with dependency workarounds (change dir to force consistent results; add -MP).
218# Requires http://permalink.gmane.org/gmane.comp.lang.nasm.devel/3704 to work.
219include $(KBUILD_PATH)/tools/NASM.kmk
220TOOL_VBoxNasm = Our version of the NASM tool
221ifndef TOOL_VBoxNasm_PATH
222 TOOL_VBoxNasm_PATH := $(firstword $(rsort $(wildcard $(KBUILD_DEVTOOLS_HST)/nasm/v*.*)))
223 if "$(TOOL_VBoxNasm_PATH)" == "" && "$(KBUILD_DEVTOOLS_HST_ALT)" != ""
224 TOOL_VBoxNasm_PATH := $(firstword $(rsort $(wildcard $(KBUILD_DEVTOOLS_HST_ALT)/nasm/v*.*)))
225 endif
226endif
227ifneq ($(TOOL_VBoxNasm_PATH),)
228 TOOL_VBoxNasm_AS ?= $(TOOL_VBoxNasm_PATH)/nasm$(HOSTSUFF_EXE)
229else
230 TOOL_VBoxNasm_AS ?= nasm$(HOSTSUFF_EXE)
231endif
232TOOL_VBoxNasm_ASFLAGS ?= $(TOOL_NASM_ASFLAGS)
233TOOL_VBoxNasm_COMPILE_AS_OUTPUT = $(outbase).lst
234TOOL_VBoxNasm_COMPILE_AS_DEPEND = $(VBoxBs3ObjConverter_1_TARGET)
235TOOL_VBoxNasm_COMPILE_AS_DEPORD =
236define TOOL_VBoxNasm_COMPILE_AS_CMDS
237ifdef TOOL_VBoxNasm_USE_KSUBMIT
238 $(QUIET)kmk_builtin_kSubmit -C $(PATH_OUT_BASE) -- $(TOOL_VBoxNasm_AS)\
239 $(flags) $(addsuffix /,$(addprefix -i, $(incs))) $(addprefix -D, $(defs))\
240 -l $(outbase).lst\
241 -o $(obj)\
242 -MD "$(dep)" -MP\
243 $(abspath $(source))
244else
245 $(QUIET)$(REDIRECT) -C $(PATH_OUT_BASE) -- $(TOOL_VBoxNasm_AS)\
246 $(flags) $(addsuffix /,$(addprefix -i, $(incs))) $(addprefix -D, $(defs))\
247 -l $(outbase).lst\
248 -o $(obj)\
249 -MD "$(dep)" -MP\
250 $(abspath $(source))
251endif
252 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
253endef
254
255#
256# ELF 64-bit compiler tool with object conversion.
257#
258# Mac needs cross compiler: sudo port install x86_64-elf-gcc
259#
260TOOL_Bs3Gcc64Elf64 := AMD64/ELF64 gcc/g++ (cross) compiler.
261ifeq ($(KBUILD_HOST),darwin)
262 TOOL_Bs3Gcc64Elf64_CC ?= x86_64-elf-gcc$(HOSTSUFF_EXE) -m64
263 TOOL_Bs3Gcc64Elf64_CXX ?= x86_64-elf-g++$(HOSTSUFF_EXE) -m64
264else
265 TOOL_Bs3Gcc64Elf64_CC ?= gcc$(HOSTSUFF_EXE) -m64
266 TOOL_Bs3Gcc64Elf64_CXX ?= g++$(HOSTSUFF_EXE) -m64
267endif
268ifdef SLKRUNS
269 TOOL_Bs3Gcc64Elf64_CC += -fmessage-length=0
270 TOOL_Bs3Gcc64Elf64_CXX += -fmessage-length=0
271endif
272TOOL_Bs3Gcc64Elf64_COBJSUFF = .o64
273TOOL_Bs3Gcc64Elf64_CFLAGS = -fno-pie -x c $(VBOX_GCC_Wa_cma_nocompress_debug_sections)
274TOOL_Bs3Gcc64Elf64_CFLAGS.debug = -g
275TOOL_Bs3Gcc64Elf64_CFLAGS.profile = -O2 #-g -pg
276TOOL_Bs3Gcc64Elf64_CFLAGS.release = -O2
277TOOL_Bs3Gcc64Elf64_CINCS =
278TOOL_Bs3Gcc64Elf64_CDEFS =
279TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPEND = $(VBoxBs3ObjConverter_1_TARGET)
280TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPORD =
281TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT =
282TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT_MAYBE = $(obj).orignal
283define TOOL_Bs3Gcc64Elf64_COMPILE_C_CMDS
284 $(QUIET)$(TOOL_Bs3Gcc64Elf64_CC) -c\
285 $(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
286 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
287 -o $(obj)\
288 $(abspath $(source))
289 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
290 $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
291endef
292
293TOOL_Bs3Gcc64Elf64_C64OBJSUFF = $(TOOL_Bs3Gcc64Elf64_COBJSUFF)
294TOOL_Bs3Gcc64Elf64_C64FLAGS = $(TOOL_Bs3Gcc64Elf64_CFLAGS)
295TOOL_Bs3Gcc64Elf64_C64FLAGS.debug = $(TOOL_Bs3Gcc64Elf64_CFLAGS.debug)
296TOOL_Bs3Gcc64Elf64_C64FLAGS.profile = $(TOOL_Bs3Gcc64Elf64_CFLAGS.profile)
297TOOL_Bs3Gcc64Elf64_C64FLAGS.release = $(TOOL_Bs3Gcc64Elf64_CFLAGS.release)
298TOOL_Bs3Gcc64Elf64_C64INCS = $(TOOL_Bs3Gcc64Elf64_CINCS)
299TOOL_Bs3Gcc64Elf64_C64DEFS = $(TOOL_Bs3Gcc64Elf64_CDEFS)
300TOOL_Bs3Gcc64Elf64_COMPILE_C64_DEPEND = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPEND)
301TOOL_Bs3Gcc64Elf64_COMPILE_C64_DEPORD = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPORD)
302TOOL_Bs3Gcc64Elf64_COMPILE_C64_OUTPUT = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT)
303TOOL_Bs3Gcc64Elf64_COMPILE_C64_OUTPUT_MAYBE = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT_MAYBE)
304define TOOL_Bs3Gcc64Elf64_COMPILE_C64_CMDS
305$(TOOL_Bs3Gcc64Elf64_COMPILE_C_CMDS)
306endef
307
308TOOL_Bs3Gcc64Elf64_CXXOBJSUFF ?= .o
309TOOL_Bs3Gcc64Elf64_CXXFLAGS ?= -fno-pie $(VBOX_GCC_Wa_cma_nocompress_debug_sections)
310TOOL_Bs3Gcc64Elf64_CXXFLAGS.debug ?= -g0 # no debug info, thank you
311TOOL_Bs3Gcc64Elf64_CXXFLAGS.profile ?= -O2 #-g -pg
312TOOL_Bs3Gcc64Elf64_CXXFLAGS.release ?= -O2
313TOOL_Bs3Gcc64Elf64_CXXINCS ?=
314TOOL_Bs3Gcc64Elf64_CXXDEFS ?=
315TOOL_Bs3Gcc64Elf64_COMPILE_CXX_DEPEND = $(VBoxBs3ObjConverter_1_TARGET)
316TOOL_Bs3Gcc64Elf64_COMPILE_CXX_DEPORD =
317TOOL_Bs3Gcc64Elf64_COMPILE_CXX_OUTPUT =
318TOOL_Bs3Gcc64Elf64_COMPILE_CXX_OUTPUT_MAYBE = $(obj).orignal
319define TOOL_Bs3Gcc64Elf64_COMPILE_CXX_CMDS
320 $(QUIET)$(TOOL_Bs3Gcc64Elf64_CXX) -c\
321 $(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
322 -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\
323 -o $(obj)\
324 $(abspath $(source))
325 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
326 $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
327endef
328
329#
330# Visual C++ tool variant that runs the object converter afterwards.
331#
332TOOL_Bs3Vcc64 := Visual C++ 64-bit
333TOOL_Bs3Vcc64_CC = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CC)
334TOOL_Bs3Vcc64_CXX = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CXX)
335TOOL_Bs3Vcc64_COBJSUFF = .o64
336TOOL_Bs3Vcc64_CFLAGS = $(filter-out -TC,$(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CFLAGS)) -TC
337TOOL_Bs3Vcc64_CFLAGS.debug =
338TOOL_Bs3Vcc64_CFLAGS.dbgopt = -O1
339TOOL_Bs3Vcc64_CFLAGS.profile = -O1
340TOOL_Bs3Vcc64_CFLAGS.release = -O1
341TOOL_Bs3Vcc64_CINCS = $(PATH_TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_INC)
342TOOL_Bs3Vcc64_CDEFS =
343TOOL_Bs3Vcc64_COMPILE_C_DEPEND = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_DEPEND) $(VBoxBs3ObjConverter_1_TARGET)
344TOOL_Bs3Vcc64_COMPILE_C_DEPORD = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_DEPORD)
345TOOL_Bs3Vcc64_COMPILE_C_OUTPUT = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_OUTPUT)
346TOOL_Bs3Vcc64_COMPILE_C_OUTPUT_MAYBE = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_OUTPUT_MAYBE) $(obj).orignal
347define TOOL_Bs3Vcc64_COMPILE_C_CMDS
348$(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_CMDS)
349 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
350endef
351
352TOOL_Bs3Vcc64_C64OBJSUFF = $(TOOL_Bs3Vcc64_COBJSUFF)
353TOOL_Bs3Vcc64_C64FLAGS = $(TOOL_Bs3Vcc64_CFLAGS)
354TOOL_Bs3Vcc64_C64FLAGS.debug = $(TOOL_Bs3Vcc64_CFLAGS.debug)
355TOOL_Bs3Vcc64_C64FLAGS.dbgopt = $(TOOL_Bs3Vcc64_CFLAGS.dbgopt)
356TOOL_Bs3Vcc64_C64FLAGS.profile = $(TOOL_Bs3Vcc64_CFLAGS.profile)
357TOOL_Bs3Vcc64_C64FLAGS.release = $(TOOL_Bs3Vcc64_CFLAGS.release)
358TOOL_Bs3Vcc64_C64INCS = $(TOOL_Bs3Vcc64_CINCS)
359TOOL_Bs3Vcc64_C64DEFS = $(TOOL_Bs3Vcc64_CDEFS)
360TOOL_Bs3Vcc64_COMPILE_C64_DEPEND = $(TOOL_Bs3Vcc64_COMPILE_C_DEPEND)
361TOOL_Bs3Vcc64_COMPILE_C64_DEPORD = $(TOOL_Bs3Vcc64_COMPILE_C_DEPORD)
362TOOL_Bs3Vcc64_COMPILE_C64_OUTPUT = $(TOOL_Bs3Vcc64_COMPILE_C_OUTPUT)
363TOOL_Bs3Vcc64_COMPILE_C64_OUTPUT_MAYBE = $(TOOL_Bs3Vcc64_COMPILE_C_OUTPUT_MAYBE)
364define TOOL_Bs3Vcc64_COMPILE_C64_CMDS
365$(TOOL_Bs3Vcc64_COMPILE_C_CMDS)
366endef
367
368TOOL_Bs3Vcc64_CXXOBJSUFF = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CXXOBJSUFF)
369TOOL_Bs3Vcc64_CXXFLAGS = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CXXFLAGS) -TP
370TOOL_Bs3Vcc64_CXXFLAGS.debug =
371TOOL_Bs3Vcc64_CXXFLAGS.dbgopt = -O1
372TOOL_Bs3Vcc64_CXXFLAGS.profile = -O1
373TOOL_Bs3Vcc64_CXXFLAGS.release = -O1
374TOOL_Bs3Vcc64_CXXINCS = $(PATH_TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_INC)
375TOOL_Bs3Vcc64_CXXDEFS =
376TOOL_Bs3Vcc64_COMPILE_CXX_DEPEND = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_DEPEND) $(VBoxBs3ObjConverter_1_TARGET)
377TOOL_Bs3Vcc64_COMPILE_CXX_DEPORD = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_DEPORD)
378TOOL_Bs3Vcc64_COMPILE_CXX_OUTPUT = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_OUTPUT)
379TOOL_Bs3Vcc64_COMPILE_CXX_OUTPUT_MAYBE = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_OUTPUT_MAYBE) $(obj).orignal
380define TOOL_Bs3Vcc64_COMPILE_CXX_CMDS
381$(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_CMDS)
382 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
383endef
384
385#
386# 32-bit OpenWatcom C/C++ tool variant that runs the object converter afterwards
387# to rename intrinsic functions so they don't clash with the 16-bit compiler.
388#
389TOOL_Bs3Ow32 := OpenWatcom C/C++ 32-bit with object convertsion
390TOOL_Bs3Ow32_CC = $(TOOL_OPENWATCOM_CC)
391TOOL_Bs3Ow32_CXX = $(TOOL_OPENWATCOM_CXX)
392TOOL_Bs3Ow32_COBJSUFF = .o32
393TOOL_Bs3Ow32_CFLAGS = $(TOOL_OPENWATCOM_CFLAGS)
394# -adfs \ - This is too complicated and it doesn't support stubbing files (svn rename fun.h pain.h). Use kDepObj instead.
395# -ad=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(dep)) \
396# -adt=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(obj)) \
397# -add=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(abspath $(source))) \
398# -adhp=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(dir $(abspath $(source))))
399TOOL_Bs3Ow32_CFLAGS.debug = $(TOOL_OPENWATCOM_CFLAGS.debug)
400TOOL_Bs3Ow32_CFLAGS.dbgopt = $(TOOL_OPENWATCOM_CFLAGS.dbgopt)
401TOOL_Bs3Ow32_CFLAGS.profile = $(TOOL_OPENWATCOM_CFLAGS.profile)
402TOOL_Bs3Ow32_CFLAGS.release = $(TOOL_OPENWATCOM_CFLAGS.release)
403TOOL_Bs3Ow32_CINCS = $(TOOL_OPENWATCOM_CINCS)
404TOOL_Bs3Ow32_CDEFS =
405TOOL_Bs3Ow32_COMPILE_C_DEPEND = $(TOOL_OPENWATCOM_COMPILE_C_DEPEND) $(VBoxBs3ObjConverter_1_TARGET)
406TOOL_Bs3Ow32_COMPILE_C_DEPORD = $(TOOL_OPENWATCOM_COMPILE_C_DEPORD)
407TOOL_Bs3Ow32_COMPILE_C_OUTPUT = $(TOOL_OPENWATCOM_COMPILE_C_OUTPUT)
408TOOL_Bs3Ow32_COMPILE_C_OUTPUT_MAYBE = $(TOOL_OPENWATCOM_COMPILE_C_OUTPUT_MAYBE) $(obj).orignal
409define TOOL_Bs3Ow32_COMPILE_C_CMDS
410$(TOOL_OPENWATCOM_COMPILE_C_CMDS)
411 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
412endef
413
414TOOL_Bs3Ow32_C32OBJSUFF = $(TOOL_Bs3Ow32_COBJSUFF)
415TOOL_Bs3Ow32_C32FLAGS = $(TOOL_Bs3Ow32_CFLAGS)
416TOOL_Bs3Ow32_C32FLAGS.debug = $(TOOL_Bs3Ow32_CFLAGS.debug)
417TOOL_Bs3Ow32_C32FLAGS.dbgopt = $(TOOL_Bs3Ow32_CFLAGS.dbgopt)
418TOOL_Bs3Ow32_C32FLAGS.profile = $(TOOL_Bs3Ow32_CFLAGS.profile)
419TOOL_Bs3Ow32_C32FLAGS.release = $(TOOL_Bs3Ow32_CFLAGS.release)
420TOOL_Bs3Ow32_C32INCS = $(TOOL_Bs3Ow32_CINCS)
421TOOL_Bs3Ow32_C32DEFS =
422TOOL_Bs3Ow32_COMPILE_C32_DEPEND = $(TOOL_Bs3Ow32_COMPILE_C_DEPEND)
423TOOL_Bs3Ow32_COMPILE_C32_DEPORD = $(TOOL_Bs3Ow32_COMPILE_C_DEPORD)
424TOOL_Bs3Ow32_COMPILE_C32_OUTPUT = $(TOOL_Bs3Ow32_COMPILE_C_OUTPUT)
425TOOL_Bs3Ow32_COMPILE_C32_OUTPUT_MAYBE = $(TOOL_Bs3Ow32_COMPILE_C_OUTPUT_MAYBE)
426define TOOL_Bs3Ow32_COMPILE_C32_CMDS
427$(TOOL_Bs3Ow32_COMPILE_C_CMDS)
428endef
429
430TOOL_Bs3Ow32_CXXOBJSUFF = $(TOOL_OPENWATCOM_CXXOBJSUFF)
431TOOL_Bs3Ow32_CXXFLAGS = $(TOOL_OPENWATCOM_CXXFLAGS) -ad=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(dep)) -adfs
432TOOL_Bs3Ow32_CXXFLAGS.debug = $(TOOL_OPENWATCOM_CXXFLAGS.debug)
433TOOL_Bs3Ow32_CXXFLAGS.dbgopt = $(TOOL_OPENWATCOM_CXXFLAGS.dbgopt)
434TOOL_Bs3Ow32_CXXFLAGS.profile = $(TOOL_OPENWATCOM_CXXFLAGS.profile)
435TOOL_Bs3Ow32_CXXFLAGS.release = $(TOOL_OPENWATCOM_CXXFLAGS.release)
436TOOL_Bs3Ow32_CXXINCS = $(TOOL_OPENWATCOM_CXXINCS)
437TOOL_Bs3Ow32_CXXDEFS =
438TOOL_Bs3Ow32_COMPILE_CXX_DEPEND = $(TOOL_OPENWATCOM_COMPILE_CXX_DEPEND) $(VBoxBs3ObjConverter_1_TARGET)
439TOOL_Bs3Ow32_COMPILE_CXX_DEPORD = $(TOOL_OPENWATCOM_COMPILE_CXX_DEPORD)
440TOOL_Bs3Ow32_COMPILE_CXX_OUTPUT = $(TOOL_OPENWATCOM_COMPILE_CXX_OUTPUT)
441TOOL_Bs3Ow32_COMPILE_CXX_OUTPUT_MAYBE = $(TOOL_OPENWATCOM_COMPILE_CXX_OUTPUT_MAYBE) $(obj).orignal
442define TOOL_Bs3Ow32_COMPILE_CXX_CMDS
443$(TOOL_OPENWATCOM_COMPILE_CXX_CMDS)
444 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
445endef
446
447
448#
449# 16-bit OpenWatcom C/C++ tool variant that runs the object converter afterwards
450# to rename intrinsic functions so they don't clash with the 16-bit compiler.
451#
452TOOL_Bs3Ow16 := OpenWatcom C/C++ 16-bit with object convertsion
453TOOL_Bs3Ow16_CC = $(TOOL_OPENWATCOM-16_CC)
454TOOL_Bs3Ow16_CXX = $(TOOL_OPENWATCOM-16_CXX)
455TOOL_Bs3Ow16_COBJSUFF = .o16
456TOOL_Bs3Ow16_CFLAGS = $(TOOL_OPENWATCOM-16_CFLAGS)
457TOOL_Bs3Ow16_CFLAGS.debug = $(TOOL_OPENWATCOM-16_CFLAGS.debug)
458TOOL_Bs3Ow16_CFLAGS.dbgopt = $(TOOL_OPENWATCOM-16_CFLAGS.dbgopt)
459TOOL_Bs3Ow16_CFLAGS.profile = $(TOOL_OPENWATCOM-16_CFLAGS.profile)
460TOOL_Bs3Ow16_CFLAGS.release = $(TOOL_OPENWATCOM-16_CFLAGS.release)
461TOOL_Bs3Ow16_CINCS = $(TOOL_OPENWATCOM-16_CINCS)
462TOOL_Bs3Ow16_CDEFS =
463TOOL_Bs3Ow16_COMPILE_C_DEPEND = $(TOOL_OPENWATCOM-16_COMPILE_C_DEPEND) $(VBoxBs3ObjConverter_1_TARGET)
464TOOL_Bs3Ow16_COMPILE_C_DEPORD = $(TOOL_OPENWATCOM-16_COMPILE_C_DEPORD)
465TOOL_Bs3Ow16_COMPILE_C_OUTPUT = $(TOOL_OPENWATCOM-16_COMPILE_C_OUTPUT)
466TOOL_Bs3Ow16_COMPILE_C_OUTPUT_MAYBE = $(TOOL_OPENWATCOM-16_COMPILE_C_OUTPUT_MAYBE)
467define TOOL_Bs3Ow16_COMPILE_C_CMDS
468$(TOOL_OPENWATCOM-16_COMPILE_C_CMDS)
469 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
470endef
471
472TOOL_Bs3Ow16_C16OBJSUFF = $(TOOL_Bs3Ow16_C16OBJSUFF)
473TOOL_Bs3Ow16_C16FLAGS = $(TOOL_Bs3Ow16_C16FLAGS)
474TOOL_Bs3Ow16_C16FLAGS.debug = $(TOOL_Bs3Ow16_C16FLAGS.debug)
475TOOL_Bs3Ow16_C16FLAGS.dbgopt = $(TOOL_Bs3Ow16_C16FLAGS.dbgopt)
476TOOL_Bs3Ow16_C16FLAGS.profile = $(TOOL_Bs3Ow16_C16FLAGS.profile)
477TOOL_Bs3Ow16_C16FLAGS.release = $(TOOL_Bs3Ow16_C16FLAGS.release)
478TOOL_Bs3Ow16_C16INCS = $(TOOL_Bs3Ow16_C16INCS)
479TOOL_Bs3Ow16_C16DEFS = $(TOOL_Bs3Ow16_C16DEFS)
480TOOL_Bs3Ow16_COMPILE_C16_DEPEND = $(TOOL_Bs3Ow16_COMPILE_C16_DEPEND)
481TOOL_Bs3Ow16_COMPILE_C16_DEPORD = $(TOOL_Bs3Ow16_COMPILE_C16_DEPORD)
482TOOL_Bs3Ow16_COMPILE_C16_OUTPUT = $(TOOL_Bs3Ow16_COMPILE_C16_OUTPUT)
483TOOL_Bs3Ow16_COMPILE_C16_OUTPUT_MAYBE = $(TOOL_Bs3Ow16_COMPILE_C16_OUTPUT_MAYBE)
484define TOOL_Bs3Ow16_COMPILE_C16_CMDS
485$(TOOL_Bs3Ow16_COMPILE_C_CMDS)
486endef
487
488TOOL_Bs3Ow16_CXXOBJSUFF = $(TOOL_OPENWATCOM-16_CXXOBJSUFF)
489TOOL_Bs3Ow16_CXXFLAGS = $(TOOL_OPENWATCOM-16_CXXFLAGS)
490TOOL_Bs3Ow16_CXXFLAGS.debug = $(TOOL_OPENWATCOM-16_CXXFLAGS.debug)
491TOOL_Bs3Ow16_CXXFLAGS.dbgopt = $(TOOL_OPENWATCOM-16_CXXFLAGS.dbgopt)
492TOOL_Bs3Ow16_CXXFLAGS.profile = $(TOOL_OPENWATCOM-16_CXXFLAGS.profile)
493TOOL_Bs3Ow16_CXXFLAGS.release = $(TOOL_OPENWATCOM-16_CXXFLAGS.release)
494TOOL_Bs3Ow16_CXXINCS = $(TOOL_OPENWATCOM-16_CXXINCS)
495TOOL_Bs3Ow16_CXXDEFS =
496TOOL_Bs3Ow16_COMPILE_CXX_DEPEND = $(TOOL_OPENWATCOM-16_COMPILE_CXX_DEPEND) $(VBoxBs3ObjConverter_1_TARGET)
497TOOL_Bs3Ow16_COMPILE_CXX_DEPORD = $(TOOL_OPENWATCOM-16_COMPILE_CXX_DEPORD)
498TOOL_Bs3Ow16_COMPILE_CXX_OUTPUT = $(TOOL_OPENWATCOM-16_COMPILE_CXX_OUTPUT)
499TOOL_Bs3Ow16_COMPILE_CXX_OUTPUT_MAYBE = $(TOOL_OPENWATCOM-16_COMPILE_CXX_OUTPUT_MAYBE)
500define TOOL_Bs3Ow16_COMPILE_CXX_CMDS
501$(TOOL_OPENWATCOM-16_COMPILE_CXX_CMDS)
502 $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)"
503endef
504
505# Debug info format depends on what we use for 64-bit.
506if 1 #1of ($(KBUILD_HOST), win) - wlink dwarf .sym files are useless for binary blobs
507 BS3_OW_DBG_OPT = -hc -d1+
508 #BS3_OW_DBG_OPT = -hd -d1+
509 BS3_OW_DBG_LDOPT = codeview
510else
511 BS3_OW_DBG_OPT = -hd -d1+
512 BS3_OW_DBG_LDOPT = dwarf
513endif
514
515#
516# Source handlers for .c16, .c32 and .c64
517#
518define VBoxBs3KitImgSrcHandler_16bit_c
519local type := C
520 $(kb-src-one 2)
521endef
522
523C32TOOL = Bs3Ow32
524define VBoxBs3KitImgSrcHandler_32bit_c
525local type := C32
526 $(kb-src-one 2)
527endef
528
529define VBoxBs3KitImgSrcHandler_64bit_c
530local type := C64
531 $(kb-src-one 2)
532endef
533
534
535#
536# BS3Kit template for assembly and 16-bit code.
537#
538# Note! Using -d1 as -d1+ and -d2 causes suboptimal code to be generated (strlen
539# reloading string pointer argument all the time).
540# Update! -d1+ is required for line number information in code living in include
541# files and any DWARF stuff at all. So, we'll ignore poor code quality.
542# Note! Optimization options should come after debug stuff as -d2 for instance
543# disables all optimziations.
544# Note! We use BS3CLASS16CODE because of wdis code detection heuristics requires the class
545# of a code segment to be exactly 'CODE', or ending with 'CODE' or 'TEXT' (more
546# recent wdis have a -c=<clsnm> option, but not the one we currently use ).
547#
548#
549# Compiler options explained:
550# -nt=xxxx Sets the text segment name.
551# -nc=xxxx Sets the text segment class name.
552# -nd=xxxx Sets the data segment name.
553# -ecc Sets the default calling convension to __cdecl
554# Update: We don't use this in 16-bit code as it causes unfavorable reloading of DS before calling
555# inlined functions (e.g. iprt/asm.h). Instead we use -ecw and __cdecl where needed.
556# Update: With -zdp the DS reloading is gone. Code is slightly larger, but seems to cure stability
557# issues in bs3CpuBasic2_RaiseXcpt1 (workers ending up with default calling convention).
558# -ecw Sets the default calling convension to __watcall ()
559# -q Quiet, no logos or stuff.
560# -0 Use 8086 instruction set (16-bit only).
561# -3 Use 386 instruction set (16-bit only).
562# -e<num> Stop after <num> errors.
563# -wx Maxium warning level.
564# -zl Don't emit default library information.
565# -zdp DS pegged to BS3DATA16_GROUP/DGROUP.
566# -zu Assume SS != DS.
567# -mc Compact memory model, far data, small code.
568# -ml Large memory model, far data, far code.
569# -mf Flat memory model (32-bit).
570# -d+ Enabled better /dVAR=XXX parsing, using space as delimiter instead of alpha-numerical/whatever.
571# -d1 Debug info: Globals and line numbers.
572# -s No stack overflow checks.
573# -oa Relaxed aliasing constraints.
574# -ob Branch prediction.
575# -of Generate stack frames when needed.
576# -oi Inline instrinsics functions.
577# -ol Loop optimizations.
578# -oh Expensive optimizations. (saves a byte or two)
579# -or Reorder for best pipeline.
580# -os Favor size over speed.
581#
582TEMPLATE_VBoxBS3KitImg = Template for building BS3Kit test images.
583TEMPLATE_VBoxBS3KitImg_BLD_TRG = os-agnostic
584TEMPLATE_VBoxBS3KitImg_BLD_TRG_ARCH = noarch
585TEMPLATE_VBoxBS3KitImg_INST = $(INST_VALIDATIONKIT)bootsectors/
586TEMPLATE_VBoxBS3KitImg_BINSUFF = .img
587TEMPLATE_VBoxBS3KitImg_MODE = 0644
588TEMPLATE_VBoxBS3KitImg_SRC_HANDLERS = \
589 .c16:VBoxBs3KitImgSrcHandler_16bit_c \
590 .c32:VBoxBs3KitImgSrcHandler_32bit_c \
591 .c64:VBoxBs3KitImgSrcHandler_64bit_c
592TEMPLATE_VBoxBS3KitImg_ASOBJSUFF = .o16
593TEMPLATE_VBoxBS3KitImg_ASTOOL = VBoxNasm
594TEMPLATE_VBoxBS3KitImg_ASFLAGS = -f obj -g $(BS3KIT_NASM_allow_64_bit) -w+orphan-labels
595TEMPLATE_VBoxBS3KitImg_ASDEFS = ASM_FORMAT_OMF RT_NOINC_SEGMENTS __NASM__ ARCH_BITS=16 RT_ARCH_X86 ASM_MODEL_FAR_CODE \
596 BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \
597 BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16)
598TEMPLATE_VBoxBS3KitImg_DEFS = IN_BS3KIT
599TEMPLATE_VBoxBS3KitImg_DEFS.debug = BS3_STRICT
600
601TEMPLATE_VBoxBS3KitImg_ARTOOL = OPENWATCOM-16
602
603TEMPLATE_VBoxBS3KitImg_CTOOL = Bs3Ow16
604TEMPLATE_VBoxBS3KitImg_CXXTOOL = Bs3Ow16
605TEMPLATE_VBoxBS3KitImg_CFLAGS = $(if $(BS3KIT_SEGNM_DATA16),-nd=$(BS3KIT_SEGNM_DATA16),) \
606 -nt=BS3TEXT16 -nc=$(BS3KIT_CLASS_CODE16) -ecc -q -0 -e125 -wx -zl -zdp -zu -ml $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -oh -d+
607TEMPLATE_VBoxBS3KitImg_CXXFLAGS = $(if $(BS3KIT_SEGNM_DATA16),-nd=$(BS3KIT_SEGNM_DATA16),) \
608 -nt=BS3TEXT16 -nc=$(BS3KIT_CLASS_CODE16) -ecc -q -0 -e125 -wx -zl -zdp -zu -ml $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -oh -d+
609TEMPLATE_VBoxBS3KitImg_CDEFS = ARCH_BITS=16 RT_ARCH_X86
610
611TEMPLATE_VBoxBS3KitImg_TOOL = $(NO_SUCH_VARIABLE)
612TEMPLATE_VBoxBS3KitImg_C16TOOL = $(TEMPLATE_VBoxBS3KitImg_CTOOL)
613TEMPLATE_VBoxBS3KitImg_C16FLAGS = $(TEMPLATE_VBoxBS3KitImg_CFLAGS)
614TEMPLATE_VBoxBS3KitImg_C16DEFS = $(TEMPLATE_VBoxBS3KitImg_CDEFS)
615TEMPLATE_VBoxBS3KitImg_C32TOOL := Bs3Ow32
616TEMPLATE_VBoxBS3KitImg_C32FLAGS = $(TEMPLATE_VBoxBS3KitImg32_CFLAGS)
617TEMPLATE_VBoxBS3KitImg_C32DEFS = ARCH_BITS=32 RT_ARCH_X86
618TEMPLATE_VBoxBS3KitImg_C64TOOL = $(TEMPLATE_VBoxBS3KitImg64_CTOOL)
619TEMPLATE_VBoxBS3KitImg_C64FLAGS = $(TEMPLATE_VBoxBS3KitImg64_CFLAGS)
620TEMPLATE_VBoxBS3KitImg_C64DEFS = ARCH_BITS=64 RT_ARCH_AMD64
621
622TEMPLATE_VBoxBS3KitImg_INCS = $(VBOX_PATH_BS3KIT_SRC) .
623TEMPLATE_VBoxBS3KitImg_LDTOOL = OPENWATCOM-WL
624
625# linker options:
626# system dos: Link a 16-bit DOS binary.
627# output raw ...: Produce a raw DOS binary for loading at flat address 10000h.
628# The following is for ordering segments.
629# option start=_start: The start symbol in bs3-first-xxx.asm.
630# debug codeview/dwarf all: Full debug information either in codeview or dwarf.
631# option symfile: Produce a separate symbol file with the debug info.
632# option map: Produce a map file.
633# option farcalls: Change intrasegment far calls into 'push cs; seg ds; call symbol' where possible.
634# option statics: ?
635# option verbose: Verbose map file?
636# option disable 1014: Disable warning about 'stack segment not found'.
637# option disable 1080: Disable warning about '%1 is a 32-bit object file'.
638#
639# Note! We're pushing DATA16 to 0x20000 because it's impossible to force wlink
640# to give us a real-mode + GDT compatible alignment (0ffffff80h), i.e.
641# real-mode address on the form 0fff8:0000.
642TEMPLATE_VBoxBS3KitImg_LDFLAGS = system dos \
643 debug $(BS3_OW_DBG_LDOPT) all \
644 option quiet, map, statics, verbose, symfile, start=_start, farcalls \
645 disable 1014, 1080 \
646 \
647 output raw offset=0x10000 \
648 order \
649 clname BS3FLAT segaddr=0x0000 \
650 segment BS3FLAT segaddr=0x0000 \
651 clname $(BS3KIT_CLASS_CODE16) segaddr=0x1000 \
652 segment BS3TEXT16 \
653 segment BS3TEXT16_NEARSTUBS \
654 segment BS3TEXT16_FARSTUBS \
655 segment BS3TEXT16_END \
656 clname BS3SYSTEM16 segaddr=0x2000 \
657 segment BS3SYSTEM16 \
658$(if-expr "$(BS3KIT_SEGNM_DATA16)" == "", \
659 clname DATA \
660 segment BS3DATA16 segaddr=0x2900 \
661 segment BS3DATA16_DATA \
662 segment DATA \
663 segment _DATA \
664 segment BS3DATA16CONST \
665 segment CONST \
666 segment BS3DATA16CONST2 \
667 segment CONST2 \
668 segment STRINGS \
669 segment BS3DATA16_END \
670 clname BSS \
671 segment BSS \
672 segment _BSS \
673 segment BS3DATA16_END \
674 clname FAR_DATA \
675 segment FAR_DATA \
676, \
677 clname FAR_DATA \
678 segment BS3DATA16 segaddr=0x2900 \
679 segment FAR_DATA \
680 segment BS3DATA16CONST \
681 segment BS3DATA16CONST2 \
682 segment BS3DATA16_DATA \
683 segment BS3DATA16_END \
684) \
685 segment BS3DATA32 \
686 segment BS3DATA32CONST \
687 segment BS3DATA32CONST2 \
688 segment BS3DATA32_DATA \
689 segment BS3DATA32_BSS \
690 segment BS3DATA32_END \
691 \
692 segment BS3DATA64 \
693 segment BS3DATA64CONST \
694 segment BS3DATA64_BSS \
695 segment BS3DATA64_END \
696 clname BS3CLASS16RMCODE \
697 segment BS3RMCODE16_START \
698 segment BS3RMCODE16 \
699 segment BS3RMCODE16_END \
700 clname BS3CLASS16X0CODE \
701 segment BS3X0CODE16_START \
702 segment BS3X0CODE16 \
703 segment BS3X0CODE16_END \
704 clname BS3CLASS16X1CODE \
705 segment BS3X1CODE16_START \
706 segment BS3X1CODE16 \
707 segment BS3X1CODE16_END \
708 clname BS3CLASS32CODE \
709 segment BS3TEXT32_START \
710 segment BS3TEXT32 \
711 segment BS3TEXT32_END \
712 clname BS3CLASSSEPARATE32AND64BITCODE \
713 segment BS3SEPARATE32AND64BITCODE \
714 segment BS3SEPARATE32AND64BITCODE_END \
715 clname BS3CLASS64CODE \
716 segment BS3TEXT64_START \
717 segment BS3TEXT64 \
718 segment BS3TEXT64_END
719
720TEMPLATE_VBoxBS3KitImg_LNK_DEPS = \
721 $(bs3-bootsector_1_TARGET) \
722 $(VBoxBs3Linker_1_TARGET)
723TEMPLATE_VBoxBS3KitImg_POST_CMDS = $(if $(eq $(tool_do),LINK_LIBRARY)\
724 ,,$(QUIET)$(MV_EXT) -f -- "$(out)" "$(out).tmp" \
725 $$(NLTAB)$(QUIET)$(VBoxBs3Linker_1_TARGET) -o $(out) $(bs3-bootsector_1_TARGET) $(out).tmp \
726 $$(NLTAB)$(QUIET)$(RM_EXT) -f -- "$(out).tmp") \
727 $(eval .PRECIOUS: $(outbase).map) # ugly hack!
728
729
730TEMPLATE_VBoxBS3KitImg_LIBS = \
731 $(PATH_OBJ)/bs3kit-common-16/bs3kit-common-16.lib \
732 $(PATH_OBJ)/bs3kit-common-32/bs3kit-common-32.lib \
733 $(PATH_OBJ)/bs3kit-common-64/bs3kit-common-64.lib \
734 \
735 $(PATH_OBJ)/bs3kit-rm/bs3kit-rm.lib \
736 $(PATH_OBJ)/bs3kit-pe16/bs3kit-pe16.lib \
737 $(PATH_OBJ)/bs3kit-pe16_32/bs3kit-pe16_32.lib \
738 $(PATH_OBJ)/bs3kit-pe16_v86/bs3kit-pe16_v86.lib \
739 $(PATH_OBJ)/bs3kit-pe32/bs3kit-pe32.lib \
740 $(PATH_OBJ)/bs3kit-pe32_16/bs3kit-pe32_16.lib \
741 $(PATH_OBJ)/bs3kit-pev86/bs3kit-pev86.lib \
742 $(PATH_OBJ)/bs3kit-pp16/bs3kit-pp16.lib \
743 $(PATH_OBJ)/bs3kit-pp16_32/bs3kit-pp16_32.lib \
744 $(PATH_OBJ)/bs3kit-pp16_v86/bs3kit-pp16_v86.lib \
745 $(PATH_OBJ)/bs3kit-pp32/bs3kit-pp32.lib \
746 $(PATH_OBJ)/bs3kit-pp32_16/bs3kit-pp32_16.lib \
747 $(PATH_OBJ)/bs3kit-ppv86/bs3kit-ppv86.lib \
748 $(PATH_OBJ)/bs3kit-pae16/bs3kit-pae16.lib \
749 $(PATH_OBJ)/bs3kit-pae16_32/bs3kit-pae16_32.lib \
750 $(PATH_OBJ)/bs3kit-pae16_v86/bs3kit-pae16_v86.lib \
751 $(PATH_OBJ)/bs3kit-pae32/bs3kit-pae32.lib \
752 $(PATH_OBJ)/bs3kit-pae32_16/bs3kit-pae32_16.lib \
753 $(PATH_OBJ)/bs3kit-paev86/bs3kit-paev86.lib \
754 $(PATH_OBJ)/bs3kit-lm16/bs3kit-lm16.lib \
755 $(PATH_OBJ)/bs3kit-lm32/bs3kit-lm32.lib \
756 $(PATH_OBJ)/bs3kit-lm64/bs3kit-lm64.lib
757
758# BS3Kit template for 32-bit code.
759TEMPLATE_VBoxBS3KitImg32 = Template for building BS3Kit test images.
760TEMPLATE_VBoxBS3KitImg32_BLD_TRG = os-agnostic
761TEMPLATE_VBoxBS3KitImg32_BLD_TRG_ARCH = x86
762TEMPLATE_VBoxBS3KitImg32_INSTTYPE = none
763TEMPLATE_VBoxBS3KitImg32_ASTOOL = VBoxNasm
764TEMPLATE_VBoxBS3KitImg32_ASOBJSUFF = .o32
765TEMPLATE_VBoxBS3KitImg32_ASFLAGS = -f obj -g $(BS3KIT_NASM_allow_64_bit) -w+orphan-labels
766TEMPLATE_VBoxBS3KitImg32_ASDEFS = ASM_FORMAT_OMF RT_NOINC_SEGMENTS __NASM__ \
767 BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \
768 BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16)
769TEMPLATE_VBoxBS3KitImg32_DEFS = ARCH_BITS=32 IN_BS3KIT
770TEMPLATE_VBoxBS3KitImg32_DEFS.debug = BS3_STRICT
771TEMPLATE_VBoxBS3KitImg32_ARTOOL = OPENWATCOM
772TEMPLATE_VBoxBS3KitImg32_CTOOL = Bs3Ow32
773TEMPLATE_VBoxBS3KitImg32_CXXTOOL = Bs3Ow32
774TEMPLATE_VBoxBS3KitImg32_CFLAGS = \
775 -nt=BS3TEXT32 -nd=BS3DATA32 -nc=BS3CLASS32CODE -ecc -q -e125 -wx -zl -mf $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -d+
776TEMPLATE_VBoxBS3KitImg32_CXXFLAGS = \
777 -nt=BS3TEXT32 -nd=BS3DATA32 -nc=BS3CLASS32CODE -ecc -q -e125 -wx -zl -mf $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -d+
778TEMPLATE_VBoxBS3KitImg32_INCS = $(VBOX_PATH_BS3KIT_SRC) .
779TEMPLATE_VBoxBS3KitImg32_LDTOOL = VBoxBsUnusedLd
780
781# BS3Kit template for 64-bit code.
782TEMPLATE_VBoxBS3KitImg64 = Template for building BS3Kit test images.
783TEMPLATE_VBoxBS3KitImg64_BLD_TRG = os-agnostic
784TEMPLATE_VBoxBS3KitImg64_BLD_TRG_ARCH = amd64
785TEMPLATE_VBoxBS3KitImg64_INSTTYPE = none
786TEMPLATE_VBoxBS3KitImg64_ASTOOL = VBoxNasm
787TEMPLATE_VBoxBS3KitImg64_ASOBJSUFF = .o64
788TEMPLATE_VBoxBS3KitImg64_ASFLAGS = -f obj -g $(BS3KIT_NASM_allow_64_bit) -w+orphan-labels
789TEMPLATE_VBoxBS3KitImg64_ASDEFS = ASM_FORMAT_OMF ASM_CALL64_MSC RT_NOINC_SEGMENTS __NASM__ \
790 BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \
791 BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16)
792TEMPLATE_VBoxBS3KitImg64_DEFS = IN_BS3KIT ARCH_BITS=64
793TEMPLATE_VBoxBS3KitImg64_DEFS.debug = BS3_STRICT
794TEMPLATE_VBoxBS3KitImg64_ARTOOL = OPENWATCOM
795TEMPLATE_VBoxBS3KitImg64_INCS = $(VBOX_PATH_BS3KIT_SRC) .
796if1of ($(KBUILD_HOST), win)
797 ifndef TOOL_VCC100AMD64 # For win.x86 builds.
798 include $(KBUILD_PATH)/tools/$(VBOX_VCC_TOOL_STEM)AMD64.kmk
799 endif
800 TEMPLATE_VBoxBS3KitImg64_CTOOL := Bs3Vcc64
801 TEMPLATE_VBoxBS3KitImg64_CXXTOOL := Bs3Vcc64
802 TEMPLATE_VBoxBS3KitImg64_CFLAGS = -Z7 -O1 -Oi -GF -GS- -Gy- -Gs65536
803 TEMPLATE_VBoxBS3KitImg64_CXXFLAGS = -Z7 -O1 -Oi -GF -GS- -Gy- -Gs65536
804else
805 TEMPLATE_VBoxBS3KitImg64_CTOOL := Bs3Gcc64Elf64
806 TEMPLATE_VBoxBS3KitImg64_CXXTOOL := Bs3Gcc64Elf64
807 # Note! -mx32 would be exactly what we needed here, however it causes internal compiler errors with 4.8.4 on gentoo.
808 TEMPLATE_VBoxBS3KitImg64_CFLAGS = -m64 -maccumulate-outgoing-args -g -Os -fno-omit-frame-pointer $(VBOX_GCC_fno-stack-protector) $(VBOX_GCC_WARN_PEDANTIC_C) \
809 -msoft-float -fno-exceptions -mno-sse -mno-mmx -mno-sse2 -mno-3dnow $(VBOX_GCC_fno-stack-protector)
810 TEMPLATE_VBoxBS3KitImg64_CXXFLAGS = -m64 -maccumulate-outgoing-args -g -Os -fno-omit-frame-pointer $(VBOX_GCC_fno-stack-protector) $(VBOX_GCC_WARN_PEDANTIC_CXX) \
811 -msoft-float -fno-exceptions -mno-sse -mno-mmx -mno-sse2 -mno-3dnow $(VBOX_GCC_fno-stack-protector)
812endif
813TEMPLATE_VBoxBS3KitImg64_LDTOOL = VBoxBsUnusedLd
814
815# BS3Kit template for the bootsector.
816TEMPLATE_VBoxBS3KitBS = Template for building BS3Kit test images.
817TEMPLATE_VBoxBS3KitBS_BLD_TRG = os-agnostic
818TEMPLATE_VBoxBS3KitBS_BLD_TRG_ARCH = x86
819TEMPLATE_VBoxBS3KitBS_INST = $(INST_VALIDATIONKIT)bootsectors/
820TEMPLATE_VBoxBS3KitBS_INSTTYPE = none
821TEMPLATE_VBoxBS3KitBS_BINSUFF = .img
822TEMPLATE_VBoxBS3KitBS_MODE = 0644
823TEMPLATE_VBoxBS3KitBS_ASTOOL = YASM
824TEMPLATE_VBoxBS3KitBS_ASFLAGS = -f bin --mapfile
825TEMPLATE_VBoxBS3KitBS_ASDEFS = ASM_FORMAT_BIN RT_NOINC_SEGMENTS ARCH_BITS=16 __YASM__ \
826 BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \
827 BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16)
828TEMPLATE_VBoxBS3KitBS_INCS = $(VBOX_PATH_BS3KIT_SRC) .
829TEMPLATE_VBoxBS3KitBS_LDTOOL = VBoxBsCpLd
830
831
832
833#
834# Extends VBoxBS3KitImg
835# User must starts SOURCES with: $(VBOX_PATH_BS3KIT_SRC)/bs3-first-dosexe.asm
836## disable 1014, 1080, 1150
837#
838TEMPLATE_VBoxBS3KitUtil = Utility using bs3kit code.
839TEMPLATE_VBoxBS3KitUtil_EXTENDS = VBoxBS3KitImg
840TEMPLATE_VBoxBS3KitUtil_BINSUFF = .exe
841TEMPLATE_VBoxBS3KitUtil_DEFS = $(TEMPLATE_VBoxBS3KitImg_DEFS) BS3_IS_DOS_EXE
842TEMPLATE_VBoxBS3KitUtil_CFLAGS = $(filter-out -zl,$(TEMPLATE_VBoxBS3KitImg_CFLAGS))
843TEMPLATE_VBoxBS3KitUtil_CXXFLAGS = $(filter-out -zl,$(TEMPLATE_VBoxBS3KitImg_CXXFLAGS))
844TEMPLATE_VBoxBS3KitUtil_LDFLAGS = system dos \
845 debug $(BS3_OW_DBG_LDOPT) all \
846 option quiet, map, statics, verbose, symfile \
847 disable 1080 \
848 order \
849 clname $(BS3KIT_CLASS_CODE16) \
850 segment BEGTEXT \
851 segment BS3TEXT16 \
852 segment _TEXT \
853 segment BS3TEXT16_NEARSTUBS \
854 segment BS3TEXT16_FARSTUBS \
855 segment BS3TEXT16_END \
856 clname BS3SYSTEM16 \
857 segment BS3SYSTEM16 \
858 \
859 clname BEGDATA \
860 segment _NULL \
861 segment _AFTERNULL \
862 clname DATA \
863$(if-expr "$(BS3KIT_SEGNM_DATA16)" == "", \
864 segment BS3DATA16 \
865 segment BS3DATA16CONST \
866 segment CONST \
867 segment BS3DATA16CONST2 \
868 segment CONST2 \
869,\
870 segment CONST \
871 segment CONST2 \
872) \
873 segment _DATA \
874 segment XIB \
875 segment XI \
876 segment XIE \
877 segment YIB \
878 segment YI \
879 segment YIE \
880 segment STRINGS \
881$(if-expr "$(BS3KIT_SEGNM_DATA16)" == "", \
882 segment BS3DATA16_DATA \
883,) \
884 segment DATA \
885 clname BSS \
886 segment _BSS \
887 segment BSS \
888 segment BS3DATA16_END \
889 clname STACK \
890 segment STACK \
891 \
892 clname FAR_DATA \
893$(if-expr "$(BS3KIT_SEGNM_DATA16)" != "", \
894 segment BS3DATA16 \
895 segment BS3DATA16_DATA \
896 segment BS3DATA16CONST \
897 segment BS3DATA16CONST2 \
898 segment FAR_DATA \
899 segment BS3DATA16_END \
900,\
901 segment FAR_DATA \
902)\
903 segment BS3DATA32 \
904 segment BS3DATA32CONST \
905 segment BS3DATA32CONST2 \
906 segment BS3DATA32_DATA \
907 segment BS3DATA32_BSS \
908 segment BS3DATA32_END \
909 \
910 segment BS3DATA64 \
911 segment BS3DATA64CONST \
912 segment BS3DATA64_BSS \
913 segment BS3DATA64_END \
914 clname BS3CLASS16RMCODE \
915 segment BS3RMCODE16_START \
916 segment BS3RMCODE16 \
917 segment BS3RMCODE16_END \
918 clname BS3CLASS16X0CODE \
919 segment BS3X0CODE16_START \
920 segment BS3X0CODE16 \
921 segment BS3X0CODE16_END \
922 clname BS3CLASS16X1CODE \
923 segment BS3X1CODE16_START \
924 segment BS3X1CODE16 \
925 segment BS3X1CODE16_END \
926 clname BS3CLASS32CODE \
927 segment BS3TEXT32 \
928 segment BS3TEXT32_END \
929 clname BS3CLASSSEPARATE32AND64BITCODE \
930 segment BS3SEPARATE32AND64BITCODE \
931 segment BS3SEPARATE32AND64BITCODE_END \
932 clname BS3CLASS64CODE \
933 segment BS3TEXT64 \
934 segment BS3TEXT64_END
935# clname BS3FLAT segaddr=0x0000 \
936# segment BS3FLAT segaddr=0x0000
937
938TEMPLATE_VBoxBS3KitUtil_LNK_DEPS = $(NO_SUCH_VARIABLE)
939TEMPLATE_VBoxBS3KitUtil_POST_CMDS = $(NO_SUCH_VARIABLE)
940
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette