VirtualBox

source: vbox/trunk/src/VBox/VMM/IOM.cpp@ 30037

Last change on this file since 30037 was 29436, checked in by vboxsync, 14 years ago

IOM: Profile all callbacks, don't bother count the as we can derive that from the profiling. Adjusted the layout so that it easier to navigate in the GUI, adding a total count as a toplevel branch.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
File size: 81.3 KB
Line 
1/* $Id: IOM.cpp 29436 2010-05-12 20:57:57Z vboxsync $ */
2/** @file
3 * IOM - Input / Output Monitor.
4 */
5
6/*
7 * Copyright (C) 2006-2007 Oracle Corporation
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 */
17
18
19/** @page pg_iom IOM - The Input / Output Monitor
20 *
21 * The input/output monitor will handle I/O exceptions routing them to the
22 * appropriate device. It implements an API to register and deregister virtual
23 * I/0 port handlers and memory mapped I/O handlers. A handler is PDM devices
24 * and a set of callback functions.
25 *
26 * @see grp_iom
27 *
28 *
29 * @section sec_iom_rawmode Raw-Mode
30 *
31 * In raw-mode I/O port access is trapped (\#GP(0)) by ensuring that the actual
32 * IOPL is 0 regardless of what the guest IOPL is. The \#GP handler use the
33 * dissassembler (DIS) to figure which instruction caused it (there are a number
34 * of instructions in addition to the I/O ones) and if it's an I/O port access
35 * it will hand it to IOMGCIOPortHandler (via EMInterpretPortIO).
36 * IOMGCIOPortHandler will lookup the port in the AVL tree of registered
37 * handlers. If found, the handler will be called otherwise default action is
38 * taken. (Default action is to write into the void and read all set bits.)
39 *
40 * Memory Mapped I/O (MMIO) is implemented as a sligtly special case of PGM
41 * access handlers. An MMIO range is registered with IOM which then registers it
42 * with the PGM access handler sub-system. The access handler catches all
43 * access and will be called in the context of a \#PF handler. In RC and R0 this
44 * handler is IOMMMIOHandler while in ring-3 it's IOMR3MMIOHandler (althought in
45 * ring-3 there can be alternative ways). IOMMMIOHandler will attempt to emulate
46 * the instruction that is doing the access and pass the corresponding reads /
47 * writes to the device.
48 *
49 * Emulating I/O port access is less complex and should be sligtly faster than
50 * emulating MMIO, so in most cases we should encourage the OS to use port I/O.
51 * Devices which are freqently accessed should register GC handlers to speed up
52 * execution.
53 *
54 *
55 * @section sec_iom_hwaccm Hardware Assisted Virtualization Mode
56 *
57 * When running in hardware assisted virtualization mode we'll be doing much the
58 * same things as in raw-mode. The main difference is that we're running in the
59 * host ring-0 context and that we don't get faults (\#GP(0) and \#PG) but
60 * exits.
61 *
62 *
63 * @section sec_iom_rem Recompiled Execution Mode
64 *
65 * When running in the recompiler things are different. I/O port access is
66 * handled by calling IOMIOPortRead and IOMIOPortWrite directly. While MMIO can
67 * be handled in one of two ways. The normal way is that we have a registered a
68 * special RAM range with the recompiler and in the three callbacks (for byte,
69 * word and dword access) we call IOMMMIORead and IOMMMIOWrite directly. The
70 * alternative ways that the physical memory access which goes via PGM will take
71 * care of it by calling IOMR3MMIOHandler via the PGM access handler machinery
72 * - this shouldn't happen but it is an alternative...
73 *
74 *
75 * @section sec_iom_other Other Accesses
76 *
77 * I/O ports aren't really exposed in any other way, unless you count the
78 * instruction interpreter in EM, but that's just what we're doing in the
79 * raw-mode \#GP(0) case really. Now it's possible to call IOMIOPortRead and
80 * IOMIOPortWrite directly to talk to a device, but this is really bad behavior
81 * and should only be done as temporary hacks (the PC BIOS device used to
82 * setup the CMOS this way back in the dark ages).
83 *
84 * MMIO has similar direct routes as the I/O ports and these shouldn't be used
85 * for the same reasons and with the same restrictions. OTOH since MMIO is
86 * mapped into the physical memory address space, it can be accessed in a number
87 * of ways thru PGM.
88 *
89 */
90
91
92/*******************************************************************************
93* Header Files *
94*******************************************************************************/
95#define LOG_GROUP LOG_GROUP_IOM
96#include <VBox/iom.h>
97#include <VBox/cpum.h>
98#include <VBox/pgm.h>
99#include <VBox/sup.h>
100#include <VBox/mm.h>
101#include <VBox/stam.h>
102#include <VBox/dbgf.h>
103#include <VBox/pdmapi.h>
104#include <VBox/pdmdev.h>
105#include "IOMInternal.h"
106#include <VBox/vm.h>
107
108#include <VBox/param.h>
109#include <iprt/assert.h>
110#include <iprt/alloc.h>
111#include <iprt/string.h>
112#include <VBox/log.h>
113#include <VBox/err.h>
114
115
116/*******************************************************************************
117* Internal Functions *
118*******************************************************************************/
119static void iomR3FlushCache(PVM pVM);
120static DECLCALLBACK(int) iomR3RelocateIOPortCallback(PAVLROIOPORTNODECORE pNode, void *pvUser);
121static DECLCALLBACK(int) iomR3RelocateMMIOCallback(PAVLROGCPHYSNODECORE pNode, void *pvUser);
122static DECLCALLBACK(void) iomR3IOPortInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs);
123static DECLCALLBACK(void) iomR3MMIOInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs);
124static DECLCALLBACK(int) iomR3IOPortDummyIn(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb);
125static DECLCALLBACK(int) iomR3IOPortDummyOut(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
126static DECLCALLBACK(int) iomR3IOPortDummyInStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfer, unsigned cb);
127static DECLCALLBACK(int) iomR3IOPortDummyOutStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfer, unsigned cb);
128
129#ifdef VBOX_WITH_STATISTICS
130static const char *iomR3IOPortGetStandardName(RTIOPORT Port);
131#endif
132
133
134/**
135 * Initializes the IOM.
136 *
137 * @returns VBox status code.
138 * @param pVM The VM to operate on.
139 */
140VMMR3DECL(int) IOMR3Init(PVM pVM)
141{
142 LogFlow(("IOMR3Init:\n"));
143
144 /*
145 * Assert alignment and sizes.
146 */
147 AssertCompileMemberAlignment(VM, iom.s, 32);
148 AssertCompile(sizeof(pVM->iom.s) <= sizeof(pVM->iom.padding));
149 AssertCompileMemberAlignment(IOM, EmtLock, sizeof(uintptr_t));
150
151 /*
152 * Setup any fixed pointers and offsets.
153 */
154 pVM->iom.s.offVM = RT_OFFSETOF(VM, iom);
155
156 /*
157 * Initialize the REM critical section.
158 */
159 int rc = PDMR3CritSectInit(pVM, &pVM->iom.s.EmtLock, RT_SRC_POS, "IOM EMT Lock");
160 AssertRCReturn(rc, rc);
161
162 /*
163 * Allocate the trees structure.
164 */
165 rc = MMHyperAlloc(pVM, sizeof(*pVM->iom.s.pTreesR3), 0, MM_TAG_IOM, (void **)&pVM->iom.s.pTreesR3);
166 if (RT_SUCCESS(rc))
167 {
168 pVM->iom.s.pTreesRC = MMHyperR3ToRC(pVM, pVM->iom.s.pTreesR3);
169 pVM->iom.s.pTreesR0 = MMHyperR3ToR0(pVM, pVM->iom.s.pTreesR3);
170 pVM->iom.s.pfnMMIOHandlerRC = NIL_RTGCPTR;
171 pVM->iom.s.pfnMMIOHandlerR0 = NIL_RTR0PTR;
172
173 /*
174 * Info.
175 */
176 DBGFR3InfoRegisterInternal(pVM, "ioport", "Dumps all IOPort ranges. No arguments.", &iomR3IOPortInfo);
177 DBGFR3InfoRegisterInternal(pVM, "mmio", "Dumps all MMIO ranges. No arguments.", &iomR3MMIOInfo);
178
179 /*
180 * Statistics.
181 */
182 STAM_REG(pVM, &pVM->iom.s.StatRZMMIOHandler, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler", STAMUNIT_TICKS_PER_CALL, "Profiling of the IOMMMIOHandler() body, only success calls.");
183 STAM_REG(pVM, &pVM->iom.s.StatRZMMIO1Byte, STAMTYPE_COUNTER, "/IOM/RZ-MMIOHandler/Access1", STAMUNIT_OCCURENCES, "MMIO access by 1 byte counter.");
184 STAM_REG(pVM, &pVM->iom.s.StatRZMMIO2Bytes, STAMTYPE_COUNTER, "/IOM/RZ-MMIOHandler/Access2", STAMUNIT_OCCURENCES, "MMIO access by 2 bytes counter.");
185 STAM_REG(pVM, &pVM->iom.s.StatRZMMIO4Bytes, STAMTYPE_COUNTER, "/IOM/RZ-MMIOHandler/Access4", STAMUNIT_OCCURENCES, "MMIO access by 4 bytes counter.");
186 STAM_REG(pVM, &pVM->iom.s.StatRZMMIO8Bytes, STAMTYPE_COUNTER, "/IOM/RZ-MMIOHandler/Access8", STAMUNIT_OCCURENCES, "MMIO access by 8 bytes counter.");
187 STAM_REG(pVM, &pVM->iom.s.StatRZMMIOFailures, STAMTYPE_COUNTER, "/IOM/RZ-MMIOHandler/MMIOFailures", STAMUNIT_OCCURENCES, "Number of times IOMMMIOHandler() didn't service the request.");
188 STAM_REG(pVM, &pVM->iom.s.StatRZInstMov, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/MOV", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOV instruction emulation.");
189 STAM_REG(pVM, &pVM->iom.s.StatRZInstCmp, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/CMP", STAMUNIT_TICKS_PER_CALL, "Profiling of the CMP instruction emulation.");
190 STAM_REG(pVM, &pVM->iom.s.StatRZInstAnd, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/AND", STAMUNIT_TICKS_PER_CALL, "Profiling of the AND instruction emulation.");
191 STAM_REG(pVM, &pVM->iom.s.StatRZInstOr, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/OR", STAMUNIT_TICKS_PER_CALL, "Profiling of the OR instruction emulation.");
192 STAM_REG(pVM, &pVM->iom.s.StatRZInstXor, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/XOR", STAMUNIT_TICKS_PER_CALL, "Profiling of the XOR instruction emulation.");
193 STAM_REG(pVM, &pVM->iom.s.StatRZInstBt, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/BT", STAMUNIT_TICKS_PER_CALL, "Profiling of the BT instruction emulation.");
194 STAM_REG(pVM, &pVM->iom.s.StatRZInstTest, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/TEST", STAMUNIT_TICKS_PER_CALL, "Profiling of the TEST instruction emulation.");
195 STAM_REG(pVM, &pVM->iom.s.StatRZInstXchg, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/XCHG", STAMUNIT_TICKS_PER_CALL, "Profiling of the XCHG instruction emulation.");
196 STAM_REG(pVM, &pVM->iom.s.StatRZInstStos, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/STOS", STAMUNIT_TICKS_PER_CALL, "Profiling of the STOS instruction emulation.");
197 STAM_REG(pVM, &pVM->iom.s.StatRZInstLods, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/LODS", STAMUNIT_TICKS_PER_CALL, "Profiling of the LODS instruction emulation.");
198#ifdef IOM_WITH_MOVS_SUPPORT
199 STAM_REG(pVM, &pVM->iom.s.StatRZInstMovs, STAMTYPE_PROFILE_ADV, "/IOM/RZ-MMIOHandler/Inst/MOVS", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation.");
200 STAM_REG(pVM, &pVM->iom.s.StatRZInstMovsToMMIO, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/MOVS/ToMMIO", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation - Mem2MMIO.");
201 STAM_REG(pVM, &pVM->iom.s.StatRZInstMovsFromMMIO, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/MOVS/FromMMIO", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation - MMIO2Mem.");
202 STAM_REG(pVM, &pVM->iom.s.StatRZInstMovsMMIO, STAMTYPE_PROFILE, "/IOM/RZ-MMIOHandler/Inst/MOVS/MMIO2MMIO", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation - MMIO2MMIO.");
203#endif
204 STAM_REG(pVM, &pVM->iom.s.StatRZInstOther, STAMTYPE_COUNTER, "/IOM/RZ-MMIOHandler/Inst/Other", STAMUNIT_OCCURENCES, "Other instructions counter.");
205 STAM_REG(pVM, &pVM->iom.s.StatR3MMIOHandler, STAMTYPE_COUNTER, "/IOM/R3-MMIOHandler", STAMUNIT_OCCURENCES, "Number of calls to IOMR3MMIOHandler.");
206 STAM_REG(pVM, &pVM->iom.s.StatInstIn, STAMTYPE_COUNTER, "/IOM/IOWork/In", STAMUNIT_OCCURENCES, "Counter of any IN instructions.");
207 STAM_REG(pVM, &pVM->iom.s.StatInstOut, STAMTYPE_COUNTER, "/IOM/IOWork/Out", STAMUNIT_OCCURENCES, "Counter of any OUT instructions.");
208 STAM_REG(pVM, &pVM->iom.s.StatInstIns, STAMTYPE_COUNTER, "/IOM/IOWork/Ins", STAMUNIT_OCCURENCES, "Counter of any INS instructions.");
209 STAM_REG(pVM, &pVM->iom.s.StatInstOuts, STAMTYPE_COUNTER, "/IOM/IOWork/Outs", STAMUNIT_OCCURENCES, "Counter of any OUTS instructions.");
210 }
211
212 /* Redundant, but just in case we change something in the future */
213 iomR3FlushCache(pVM);
214
215 LogFlow(("IOMR3Init: returns %Rrc\n", rc));
216 return rc;
217}
218
219
220/**
221 * Flushes the IOM port & statistics lookup cache
222 *
223 * @param pVM The VM.
224 */
225static void iomR3FlushCache(PVM pVM)
226{
227 iomLock(pVM);
228 /*
229 * Caching of port and statistics (saves some time in rep outs/ins instruction emulation)
230 */
231 pVM->iom.s.pRangeLastReadR0 = NIL_RTR0PTR;
232 pVM->iom.s.pRangeLastWriteR0 = NIL_RTR0PTR;
233 pVM->iom.s.pStatsLastReadR0 = NIL_RTR0PTR;
234 pVM->iom.s.pStatsLastWriteR0 = NIL_RTR0PTR;
235 pVM->iom.s.pMMIORangeLastR0 = NIL_RTR0PTR;
236 pVM->iom.s.pMMIOStatsLastR0 = NIL_RTR0PTR;
237
238 pVM->iom.s.pRangeLastReadR3 = NULL;
239 pVM->iom.s.pRangeLastWriteR3 = NULL;
240 pVM->iom.s.pStatsLastReadR3 = NULL;
241 pVM->iom.s.pStatsLastWriteR3 = NULL;
242 pVM->iom.s.pMMIORangeLastR3 = NULL;
243 pVM->iom.s.pMMIOStatsLastR3 = NULL;
244
245 pVM->iom.s.pRangeLastReadRC = NIL_RTRCPTR;
246 pVM->iom.s.pRangeLastWriteRC = NIL_RTRCPTR;
247 pVM->iom.s.pStatsLastReadRC = NIL_RTRCPTR;
248 pVM->iom.s.pStatsLastWriteRC = NIL_RTRCPTR;
249 pVM->iom.s.pMMIORangeLastRC = NIL_RTRCPTR;
250 pVM->iom.s.pMMIOStatsLastRC = NIL_RTRCPTR;
251
252 iomUnlock(pVM);
253}
254
255
256/**
257 * The VM is being reset.
258 *
259 * @param pVM VM handle.
260 */
261VMMR3DECL(void) IOMR3Reset(PVM pVM)
262{
263 iomR3FlushCache(pVM);
264}
265
266
267/**
268 * Applies relocations to data and code managed by this
269 * component. This function will be called at init and
270 * whenever the VMM need to relocate it self inside the GC.
271 *
272 * The IOM will update the addresses used by the switcher.
273 *
274 * @param pVM The VM.
275 * @param offDelta Relocation delta relative to old location.
276 */
277VMMR3DECL(void) IOMR3Relocate(PVM pVM, RTGCINTPTR offDelta)
278{
279 LogFlow(("IOMR3Relocate: offDelta=%d\n", offDelta));
280
281 /*
282 * Apply relocations to the GC callbacks.
283 */
284 pVM->iom.s.pTreesRC = MMHyperR3ToRC(pVM, pVM->iom.s.pTreesR3);
285 RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesR3->IOPortTreeRC, true, iomR3RelocateIOPortCallback, &offDelta);
286 RTAvlroGCPhysDoWithAll(&pVM->iom.s.pTreesR3->MMIOTree, true, iomR3RelocateMMIOCallback, &offDelta);
287
288 if (pVM->iom.s.pfnMMIOHandlerRC)
289 pVM->iom.s.pfnMMIOHandlerRC += offDelta;
290
291 /*
292 * Apply relocations to the cached GC handlers
293 */
294 if (pVM->iom.s.pRangeLastReadRC)
295 pVM->iom.s.pRangeLastReadRC += offDelta;
296 if (pVM->iom.s.pRangeLastWriteRC)
297 pVM->iom.s.pRangeLastWriteRC += offDelta;
298 if (pVM->iom.s.pStatsLastReadRC)
299 pVM->iom.s.pStatsLastReadRC += offDelta;
300 if (pVM->iom.s.pStatsLastWriteRC)
301 pVM->iom.s.pStatsLastWriteRC += offDelta;
302 if (pVM->iom.s.pMMIORangeLastRC)
303 pVM->iom.s.pMMIORangeLastRC += offDelta;
304 if (pVM->iom.s.pMMIOStatsLastRC)
305 pVM->iom.s.pMMIOStatsLastRC += offDelta;
306}
307
308
309/**
310 * Callback function for relocating a I/O port range.
311 *
312 * @returns 0 (continue enum)
313 * @param pNode Pointer to a IOMIOPORTRANGERC node.
314 * @param pvUser Pointer to the offDelta. This is a pointer to the delta since we're
315 * not certain the delta will fit in a void pointer for all possible configs.
316 */
317static DECLCALLBACK(int) iomR3RelocateIOPortCallback(PAVLROIOPORTNODECORE pNode, void *pvUser)
318{
319 PIOMIOPORTRANGERC pRange = (PIOMIOPORTRANGERC)pNode;
320 RTGCINTPTR offDelta = *(PRTGCINTPTR)pvUser;
321
322 Assert(pRange->pDevIns);
323 pRange->pDevIns += offDelta;
324 if (pRange->pfnOutCallback)
325 pRange->pfnOutCallback += offDelta;
326 if (pRange->pfnInCallback)
327 pRange->pfnInCallback += offDelta;
328 if (pRange->pfnOutStrCallback)
329 pRange->pfnOutStrCallback += offDelta;
330 if (pRange->pfnInStrCallback)
331 pRange->pfnInStrCallback += offDelta;
332 if (pRange->pvUser > _64K)
333 pRange->pvUser += offDelta;
334 return 0;
335}
336
337
338/**
339 * Callback function for relocating a MMIO range.
340 *
341 * @returns 0 (continue enum)
342 * @param pNode Pointer to a IOMMMIORANGE node.
343 * @param pvUser Pointer to the offDelta. This is a pointer to the delta since we're
344 * not certain the delta will fit in a void pointer for all possible configs.
345 */
346static DECLCALLBACK(int) iomR3RelocateMMIOCallback(PAVLROGCPHYSNODECORE pNode, void *pvUser)
347{
348 PIOMMMIORANGE pRange = (PIOMMMIORANGE)pNode;
349 RTGCINTPTR offDelta = *(PRTGCINTPTR)pvUser;
350
351 if (pRange->pDevInsRC)
352 pRange->pDevInsRC += offDelta;
353 if (pRange->pfnWriteCallbackRC)
354 pRange->pfnWriteCallbackRC += offDelta;
355 if (pRange->pfnReadCallbackRC)
356 pRange->pfnReadCallbackRC += offDelta;
357 if (pRange->pfnFillCallbackRC)
358 pRange->pfnFillCallbackRC += offDelta;
359 if (pRange->pvUserRC > _64K)
360 pRange->pvUserRC += offDelta;
361
362 return 0;
363}
364
365
366/**
367 * Terminates the IOM.
368 *
369 * Termination means cleaning up and freeing all resources,
370 * the VM it self is at this point powered off or suspended.
371 *
372 * @returns VBox status code.
373 * @param pVM The VM to operate on.
374 */
375VMMR3DECL(int) IOMR3Term(PVM pVM)
376{
377 /*
378 * IOM is not owning anything but automatically freed resources,
379 * so there's nothing to do here.
380 */
381 return VINF_SUCCESS;
382}
383
384#ifdef VBOX_WITH_STATISTICS
385
386/**
387 * Create the statistics node for an I/O port.
388 *
389 * @returns Pointer to new stats node.
390 *
391 * @param pVM VM handle.
392 * @param Port Port.
393 * @param pszDesc Description.
394 */
395PIOMIOPORTSTATS iomR3IOPortStatsCreate(PVM pVM, RTIOPORT Port, const char *pszDesc)
396{
397 Assert(IOMIsLockOwner(pVM));
398 /* check if it already exists. */
399 PIOMIOPORTSTATS pPort = (PIOMIOPORTSTATS)RTAvloIOPortGet(&pVM->iom.s.pTreesR3->IOPortStatTree, Port);
400 if (pPort)
401 return pPort;
402
403 /* allocate stats node. */
404 int rc = MMHyperAlloc(pVM, sizeof(*pPort), 0, MM_TAG_IOM_STATS, (void **)&pPort);
405 AssertRC(rc);
406 if (RT_SUCCESS(rc))
407 {
408 /* insert into the tree. */
409 pPort->Core.Key = Port;
410 if (RTAvloIOPortInsert(&pVM->iom.s.pTreesR3->IOPortStatTree, &pPort->Core))
411 {
412 /* put a name on common ports. */
413 if (!pszDesc)
414 pszDesc = iomR3IOPortGetStandardName(Port);
415
416 /* register the statistics counters. */
417 rc = STAMR3RegisterF(pVM, &pPort->InR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/Ports/%04x-In-R3", Port); AssertRC(rc);
418 rc = STAMR3RegisterF(pVM, &pPort->OutR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/Ports/%04x-Out-R3", Port); AssertRC(rc);
419 rc = STAMR3RegisterF(pVM, &pPort->InRZ, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/Ports/%04x-In-RZ", Port); AssertRC(rc);
420 rc = STAMR3RegisterF(pVM, &pPort->OutRZ, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/Ports/%04x-Out-RZ", Port); AssertRC(rc);
421 rc = STAMR3RegisterF(pVM, &pPort->InRZToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/Ports/%04x-In-RZtoR3", Port); AssertRC(rc);
422 rc = STAMR3RegisterF(pVM, &pPort->OutRZToR3,STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/Ports/%04x-Out-RZtoR3", Port); AssertRC(rc);
423
424 /* Profiling */
425 rc = STAMR3RegisterF(pVM, &pPort->ProfInR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc,"/IOM/Ports/%04x-In-R3/Prof", Port); AssertRC(rc);
426 rc = STAMR3RegisterF(pVM, &pPort->ProfOutR3,STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc,"/IOM/Ports/%04x-Out-R3/Prof", Port); AssertRC(rc);
427 rc = STAMR3RegisterF(pVM, &pPort->ProfInRZ, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc,"/IOM/Ports/%04x-In-RZ/Prof", Port); AssertRC(rc);
428 rc = STAMR3RegisterF(pVM, &pPort->ProfOutRZ,STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc,"/IOM/Ports/%04x-Out-RZ/Prof", Port); AssertRC(rc);
429
430 return pPort;
431 }
432 AssertMsgFailed(("what! Port=%d\n", Port));
433 MMHyperFree(pVM, pPort);
434 }
435 return NULL;
436}
437
438
439/**
440 * Create the statistics node for an MMIO address.
441 *
442 * @returns Pointer to new stats node.
443 *
444 * @param pVM VM handle.
445 * @param GCPhys The address.
446 * @param pszDesc Description.
447 */
448PIOMMMIOSTATS iomR3MMIOStatsCreate(PVM pVM, RTGCPHYS GCPhys, const char *pszDesc)
449{
450 Assert(IOMIsLockOwner(pVM));
451#ifdef DEBUG_sandervl
452 AssertGCPhys32(GCPhys);
453#endif
454 /* check if it already exists. */
455 PIOMMMIOSTATS pStats = (PIOMMMIOSTATS)RTAvloGCPhysGet(&pVM->iom.s.pTreesR3->MMIOStatTree, GCPhys);
456 if (pStats)
457 return pStats;
458
459 /* allocate stats node. */
460 int rc = MMHyperAlloc(pVM, sizeof(*pStats), 0, MM_TAG_IOM_STATS, (void **)&pStats);
461 AssertRC(rc);
462 if (RT_SUCCESS(rc))
463 {
464 /* insert into the tree. */
465 pStats->Core.Key = GCPhys;
466 if (RTAvloGCPhysInsert(&pVM->iom.s.pTreesR3->MMIOStatTree, &pStats->Core))
467 {
468 rc = STAMR3RegisterF(pVM, &pStats->Accesses, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp", GCPhys); AssertRC(rc);
469 rc = STAMR3RegisterF(pVM, &pStats->ProfReadR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp/Read-R3", GCPhys); AssertRC(rc);
470 rc = STAMR3RegisterF(pVM, &pStats->ProfWriteR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp/Write-R3", GCPhys); AssertRC(rc);
471 rc = STAMR3RegisterF(pVM, &pStats->ProfReadRZ, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp/Read-RZ", GCPhys); AssertRC(rc);
472 rc = STAMR3RegisterF(pVM, &pStats->ProfWriteRZ, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp/Write-RZ", GCPhys); AssertRC(rc);
473 rc = STAMR3RegisterF(pVM, &pStats->ReadRZToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp/Read-RZtoR3", GCPhys); AssertRC(rc);
474 rc = STAMR3RegisterF(pVM, &pStats->WriteRZToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp/Write-RZtoR3", GCPhys); AssertRC(rc);
475
476 return pStats;
477 }
478 AssertMsgFailed(("what! GCPhys=%RGp\n", GCPhys));
479 MMHyperFree(pVM, pStats);
480 }
481 return NULL;
482}
483
484#endif /* VBOX_WITH_STATISTICS */
485
486/**
487 * Registers a I/O port ring-3 handler.
488 *
489 * This API is called by PDM on behalf of a device. Devices must first register
490 * ring-3 ranges before any GC and R0 ranges can be registerd using IOMR3IOPortRegisterRC()
491 * and IOMR3IOPortRegisterR0().
492 *
493 *
494 * @returns VBox status code.
495 *
496 * @param pVM VM handle.
497 * @param pDevIns PDM device instance owning the port range.
498 * @param PortStart First port number in the range.
499 * @param cPorts Number of ports to register.
500 * @param pvUser User argument for the callbacks.
501 * @param pfnOutCallback Pointer to function which is gonna handle OUT operations in R3.
502 * @param pfnInCallback Pointer to function which is gonna handle IN operations in R3.
503 * @param pfnOutStrCallback Pointer to function which is gonna handle string OUT operations in R3.
504 * @param pfnInStrCallback Pointer to function which is gonna handle string IN operations in R3.
505 * @param pszDesc Pointer to description string. This must not be freed.
506 */
507VMMR3DECL(int) IOMR3IOPortRegisterR3(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTHCPTR pvUser,
508 R3PTRTYPE(PFNIOMIOPORTOUT) pfnOutCallback, R3PTRTYPE(PFNIOMIOPORTIN) pfnInCallback,
509 R3PTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, R3PTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback, const char *pszDesc)
510{
511 LogFlow(("IOMR3IOPortRegisterR3: pDevIns=%p PortStart=%#x cPorts=%#x pvUser=%RHv pfnOutCallback=%#x pfnInCallback=%#x pfnOutStrCallback=%#x pfnInStrCallback=%#x pszDesc=%s\n",
512 pDevIns, PortStart, cPorts, pvUser, pfnOutCallback, pfnInCallback, pfnOutStrCallback, pfnInStrCallback, pszDesc));
513
514 /*
515 * Validate input.
516 */
517 if ( (RTUINT)PortStart + cPorts <= (RTUINT)PortStart
518 || (RTUINT)PortStart + cPorts > 0x10000)
519 {
520 AssertMsgFailed(("Invalid port range %#x-%#x (inclusive)! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc));
521 return VERR_IOM_INVALID_IOPORT_RANGE;
522 }
523 if (!pfnOutCallback && !pfnInCallback)
524 {
525 AssertMsgFailed(("no handlers specfied for %#x-%#x (inclusive)! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc));
526 return VERR_INVALID_PARAMETER;
527 }
528 if (!pfnOutCallback)
529 pfnOutCallback = iomR3IOPortDummyOut;
530 if (!pfnInCallback)
531 pfnInCallback = iomR3IOPortDummyIn;
532 if (!pfnOutStrCallback)
533 pfnOutStrCallback = iomR3IOPortDummyOutStr;
534 if (!pfnInStrCallback)
535 pfnInStrCallback = iomR3IOPortDummyInStr;
536
537 /* Flush the IO port lookup cache */
538 iomR3FlushCache(pVM);
539
540 /*
541 * Allocate new range record and initialize it.
542 */
543 PIOMIOPORTRANGER3 pRange;
544 int rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange);
545 if (RT_SUCCESS(rc))
546 {
547 pRange->Core.Key = PortStart;
548 pRange->Core.KeyLast = PortStart + (cPorts - 1);
549 pRange->Port = PortStart;
550 pRange->cPorts = cPorts;
551 pRange->pvUser = pvUser;
552 pRange->pDevIns = pDevIns;
553 pRange->pfnOutCallback = pfnOutCallback;
554 pRange->pfnInCallback = pfnInCallback;
555 pRange->pfnOutStrCallback = pfnOutStrCallback;
556 pRange->pfnInStrCallback = pfnInStrCallback;
557 pRange->pszDesc = pszDesc;
558
559 /*
560 * Try Insert it.
561 */
562 iomLock(pVM);
563 if (RTAvlroIOPortInsert(&pVM->iom.s.pTreesR3->IOPortTreeR3, &pRange->Core))
564 {
565 #ifdef VBOX_WITH_STATISTICS
566 for (unsigned iPort = 0; iPort < cPorts; iPort++)
567 iomR3IOPortStatsCreate(pVM, PortStart + iPort, pszDesc);
568 #endif
569 iomUnlock(pVM);
570 return VINF_SUCCESS;
571 }
572 iomUnlock(pVM);
573
574 /* conflict. */
575 DBGFR3Info(pVM, "ioport", NULL, NULL);
576 AssertMsgFailed(("Port range %#x-%#x (%s) conflicts with existing range(s)!\n", PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
577 MMHyperFree(pVM, pRange);
578 rc = VERR_IOM_IOPORT_RANGE_CONFLICT;
579 }
580
581 return rc;
582}
583
584
585/**
586 * Registers a I/O port RC handler.
587 *
588 * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges
589 * using IOMIOPortRegisterR3() before calling this function.
590 *
591 *
592 * @returns VBox status code.
593 *
594 * @param pVM VM handle.
595 * @param pDevIns PDM device instance owning the port range.
596 * @param PortStart First port number in the range.
597 * @param cPorts Number of ports to register.
598 * @param pvUser User argument for the callbacks.
599 * @param pfnOutCallback Pointer to function which is gonna handle OUT operations in GC.
600 * @param pfnInCallback Pointer to function which is gonna handle IN operations in GC.
601 * @param pfnOutStrCallback Pointer to function which is gonna handle string OUT operations in GC.
602 * @param pfnInStrCallback Pointer to function which is gonna handle string IN operations in GC.
603 * @param pszDesc Pointer to description string. This must not be freed.
604 */
605VMMR3DECL(int) IOMR3IOPortRegisterRC(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTRCPTR pvUser,
606 RCPTRTYPE(PFNIOMIOPORTOUT) pfnOutCallback, RCPTRTYPE(PFNIOMIOPORTIN) pfnInCallback,
607 RCPTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, RCPTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback, const char *pszDesc)
608{
609 LogFlow(("IOMR3IOPortRegisterRC: pDevIns=%p PortStart=%#x cPorts=%#x pvUser=%RRv pfnOutCallback=%RRv pfnInCallback=%RRv pfnOutStrCallback=%RRv pfnInStrCallback=%RRv pszDesc=%s\n",
610 pDevIns, PortStart, cPorts, pvUser, pfnOutCallback, pfnInCallback, pfnOutStrCallback, pfnInStrCallback, pszDesc));
611
612 /*
613 * Validate input.
614 */
615 if ( (RTUINT)PortStart + cPorts <= (RTUINT)PortStart
616 || (RTUINT)PortStart + cPorts > 0x10000)
617 {
618 AssertMsgFailed(("Invalid port range %#x-%#x! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc));
619 return VERR_IOM_INVALID_IOPORT_RANGE;
620 }
621 RTIOPORT PortLast = PortStart + (cPorts - 1);
622 if (!pfnOutCallback && !pfnInCallback)
623 {
624 AssertMsgFailed(("Invalid port range %#x-%#x! No callbacks! (%s)\n", PortStart, PortLast, pszDesc));
625 return VERR_INVALID_PARAMETER;
626 }
627
628 iomLock(pVM);
629
630 /*
631 * Validate that there are ring-3 ranges for the ports.
632 */
633 RTIOPORT Port = PortStart;
634 while (Port <= PortLast && Port >= PortStart)
635 {
636 PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.CTX_SUFF(pTrees)->IOPortTreeR3, Port);
637 if (!pRange)
638 {
639 AssertMsgFailed(("No R3! Port=#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
640 iomUnlock(pVM);
641 return VERR_IOM_NO_HC_IOPORT_RANGE;
642 }
643#ifndef IOM_NO_PDMINS_CHECKS
644# ifndef IN_RC
645 if (pRange->pDevIns != pDevIns)
646# else
647 if (pRange->pDevIns != MMHyperRCToCC(pVM, pDevIns))
648# endif
649 {
650 AssertMsgFailed(("Not owner! Port=%#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
651 iomUnlock(pVM);
652 return VERR_IOM_NOT_IOPORT_RANGE_OWNER;
653 }
654#endif
655 Port = pRange->Core.KeyLast + 1;
656 }
657
658 /* Flush the IO port lookup cache */
659 iomR3FlushCache(pVM);
660
661 /*
662 * Allocate new range record and initialize it.
663 */
664 PIOMIOPORTRANGERC pRange;
665 int rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange);
666 if (RT_SUCCESS(rc))
667 {
668 pRange->Core.Key = PortStart;
669 pRange->Core.KeyLast = PortLast;
670 pRange->Port = PortStart;
671 pRange->cPorts = cPorts;
672 pRange->pvUser = pvUser;
673 pRange->pfnOutCallback = pfnOutCallback;
674 pRange->pfnInCallback = pfnInCallback;
675 pRange->pfnOutStrCallback = pfnOutStrCallback;
676 pRange->pfnInStrCallback = pfnInStrCallback;
677 pRange->pDevIns = MMHyperCCToRC(pVM, pDevIns);
678 pRange->pszDesc = pszDesc;
679
680 /*
681 * Insert it.
682 */
683 if (RTAvlroIOPortInsert(&pVM->iom.s.CTX_SUFF(pTrees)->IOPortTreeRC, &pRange->Core))
684 {
685 iomUnlock(pVM);
686 return VINF_SUCCESS;
687 }
688
689 /* conflict. */
690 AssertMsgFailed(("Port range %#x-%#x (%s) conflicts with existing range(s)!\n", PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
691 MMHyperFree(pVM, pRange);
692 rc = VERR_IOM_IOPORT_RANGE_CONFLICT;
693 }
694 iomUnlock(pVM);
695 return rc;
696}
697
698
699/**
700 * Registers a Port IO R0 handler.
701 *
702 * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges
703 * using IOMR3IOPortRegisterR3() before calling this function.
704 *
705 *
706 * @returns VBox status code.
707 *
708 * @param pVM VM handle.
709 * @param pDevIns PDM device instance owning the port range.
710 * @param PortStart First port number in the range.
711 * @param cPorts Number of ports to register.
712 * @param pvUser User argument for the callbacks.
713 * @param pfnOutCallback Pointer to function which is gonna handle OUT operations in GC.
714 * @param pfnInCallback Pointer to function which is gonna handle IN operations in GC.
715 * @param pfnOutStrCallback Pointer to function which is gonna handle OUT operations in GC.
716 * @param pfnInStrCallback Pointer to function which is gonna handle IN operations in GC.
717 * @param pszDesc Pointer to description string. This must not be freed.
718 */
719VMMR3DECL(int) IOMR3IOPortRegisterR0(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTR0PTR pvUser,
720 R0PTRTYPE(PFNIOMIOPORTOUT) pfnOutCallback, R0PTRTYPE(PFNIOMIOPORTIN) pfnInCallback,
721 R0PTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, R0PTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback,
722 const char *pszDesc)
723{
724 LogFlow(("IOMR3IOPortRegisterR0: pDevIns=%p PortStart=%#x cPorts=%#x pvUser=%RHv pfnOutCallback=%RHv pfnInCallback=%RHv pfnOutStrCallback=%RHv pfnInStrCallback=%RHv pszDesc=%s\n",
725 pDevIns, PortStart, cPorts, pvUser, pfnOutCallback, pfnInCallback, pfnOutStrCallback, pfnInStrCallback, pszDesc));
726
727 /*
728 * Validate input.
729 */
730 if ( (RTUINT)PortStart + cPorts <= (RTUINT)PortStart
731 || (RTUINT)PortStart + cPorts > 0x10000)
732 {
733 AssertMsgFailed(("Invalid port range %#x-%#x! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc));
734 return VERR_IOM_INVALID_IOPORT_RANGE;
735 }
736 RTIOPORT PortLast = PortStart + (cPorts - 1);
737 if (!pfnOutCallback && !pfnInCallback)
738 {
739 AssertMsgFailed(("Invalid port range %#x-%#x! No callbacks! (%s)\n", PortStart, PortLast, pszDesc));
740 return VERR_INVALID_PARAMETER;
741 }
742
743 iomLock(pVM);
744 /*
745 * Validate that there are ring-3 ranges for the ports.
746 */
747 RTIOPORT Port = PortStart;
748 while (Port <= PortLast && Port >= PortStart)
749 {
750 PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.CTX_SUFF(pTrees)->IOPortTreeR3, Port);
751 if (!pRange)
752 {
753 AssertMsgFailed(("No R3! Port=#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
754 iomUnlock(pVM);
755 return VERR_IOM_NO_HC_IOPORT_RANGE;
756 }
757#ifndef IOM_NO_PDMINS_CHECKS
758# ifndef IN_RC
759 if (pRange->pDevIns != pDevIns)
760# else
761 if (pRange->pDevIns != MMHyperRCToCC(pVM, pDevIns))
762# endif
763 {
764 AssertMsgFailed(("Not owner! Port=%#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
765 iomUnlock(pVM);
766 return VERR_IOM_NOT_IOPORT_RANGE_OWNER;
767 }
768#endif
769 Port = pRange->Core.KeyLast + 1;
770 }
771
772 /* Flush the IO port lookup cache */
773 iomR3FlushCache(pVM);
774
775 /*
776 * Allocate new range record and initialize it.
777 */
778 PIOMIOPORTRANGER0 pRange;
779 int rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange);
780 if (RT_SUCCESS(rc))
781 {
782 pRange->Core.Key = PortStart;
783 pRange->Core.KeyLast = PortLast;
784 pRange->Port = PortStart;
785 pRange->cPorts = cPorts;
786 pRange->pvUser = pvUser;
787 pRange->pfnOutCallback = pfnOutCallback;
788 pRange->pfnInCallback = pfnInCallback;
789 pRange->pfnOutStrCallback = pfnOutStrCallback;
790 pRange->pfnInStrCallback = pfnInStrCallback;
791 pRange->pDevIns = MMHyperR3ToR0(pVM, pDevIns);
792 pRange->pszDesc = pszDesc;
793
794 /*
795 * Insert it.
796 */
797 if (RTAvlroIOPortInsert(&pVM->iom.s.CTX_SUFF(pTrees)->IOPortTreeR0, &pRange->Core))
798 {
799 iomUnlock(pVM);
800 return VINF_SUCCESS;
801 }
802
803 /* conflict. */
804 AssertMsgFailed(("Port range %#x-%#x (%s) conflicts with existing range(s)!\n", PortStart, (unsigned)PortStart + cPorts - 1, pszDesc));
805 MMHyperFree(pVM, pRange);
806 rc = VERR_IOM_IOPORT_RANGE_CONFLICT;
807 }
808 iomUnlock(pVM);
809 return rc;
810}
811
812
813/**
814 * Deregisters a I/O Port range.
815 *
816 * The specified range must be registered using IOMR3IOPortRegister previous to
817 * this call. The range does can be a smaller part of the range specified to
818 * IOMR3IOPortRegister, but it can never be larger.
819 *
820 * This function will remove GC, R0 and R3 context port handlers for this range.
821 *
822 * @returns VBox status code.
823 *
824 * @param pVM The virtual machine.
825 * @param pDevIns The device instance associated with the range.
826 * @param PortStart First port number in the range.
827 * @param cPorts Number of ports to remove starting at PortStart.
828 *
829 * @remark This function mainly for PCI PnP Config and will not do
830 * all the checks you might expect it to do.
831 */
832VMMR3DECL(int) IOMR3IOPortDeregister(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts)
833{
834 LogFlow(("IOMR3IOPortDeregister: pDevIns=%p PortStart=%#x cPorts=%#x\n", pDevIns, PortStart, cPorts));
835
836 /*
837 * Validate input.
838 */
839 if ( (RTUINT)PortStart + cPorts < (RTUINT)PortStart
840 || (RTUINT)PortStart + cPorts > 0x10000)
841 {
842 AssertMsgFailed(("Invalid port range %#x-%#x!\n", PortStart, (unsigned)PortStart + cPorts - 1));
843 return VERR_IOM_INVALID_IOPORT_RANGE;
844 }
845
846 iomLock(pVM);
847
848 /* Flush the IO port lookup cache */
849 iomR3FlushCache(pVM);
850
851 /*
852 * Check ownership.
853 */
854 RTIOPORT PortLast = PortStart + (cPorts - 1);
855 RTIOPORT Port = PortStart;
856 while (Port <= PortLast && Port >= PortStart)
857 {
858 PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesR3->IOPortTreeR3, Port);
859 if (pRange)
860 {
861 Assert(Port <= pRange->Core.KeyLast);
862#ifndef IOM_NO_PDMINS_CHECKS
863 if (pRange->pDevIns != pDevIns)
864 {
865 AssertMsgFailed(("Removal of ports in range %#x-%#x rejected because not owner of %#x-%#x (%s)\n",
866 PortStart, PortLast, pRange->Core.Key, pRange->Core.KeyLast, pRange->pszDesc));
867 iomUnlock(pVM);
868 return VERR_IOM_NOT_IOPORT_RANGE_OWNER;
869 }
870#endif /* !IOM_NO_PDMINS_CHECKS */
871 Port = pRange->Core.KeyLast;
872 }
873 Port++;
874 }
875
876 /*
877 * Remove any RC ranges first.
878 */
879 int rc = VINF_SUCCESS;
880 Port = PortStart;
881 while (Port <= PortLast && Port >= PortStart)
882 {
883 /*
884 * Try find range.
885 */
886 PIOMIOPORTRANGERC pRange = (PIOMIOPORTRANGERC)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesR3->IOPortTreeRC, Port);
887 if (pRange)
888 {
889 if ( pRange->Core.Key == Port
890 && pRange->Core.KeyLast <= PortLast)
891 {
892 /*
893 * Kick out the entire range.
894 */
895 void *pv = RTAvlroIOPortRemove(&pVM->iom.s.pTreesR3->IOPortTreeRC, Port);
896 Assert(pv == (void *)pRange); NOREF(pv);
897 Port += pRange->cPorts;
898 MMHyperFree(pVM, pRange);
899 }
900 else if (pRange->Core.Key == Port)
901 {
902 /*
903 * Cut of the head of the range, done.
904 */
905 pRange->cPorts -= Port - pRange->Port;
906 pRange->Core.Key = Port;
907 pRange->Port = Port;
908 break;
909 }
910 else if (pRange->Core.KeyLast <= PortLast)
911 {
912 /*
913 * Just cut of the tail.
914 */
915 unsigned c = pRange->Core.KeyLast - Port + 1;
916 pRange->Core.KeyLast -= c;
917 pRange->cPorts -= c;
918 Port += c;
919 }
920 else
921 {
922 /*
923 * Split the range, done.
924 */
925 Assert(pRange->Core.KeyLast > PortLast && pRange->Core.Key < Port);
926 /* create tail. */
927 PIOMIOPORTRANGERC pRangeNew;
928 int rc2 = MMHyperAlloc(pVM, sizeof(*pRangeNew), 0, MM_TAG_IOM, (void **)&pRangeNew);
929 if (RT_FAILURE(rc2))
930 {
931 iomUnlock(pVM);
932 return rc2;
933 }
934 *pRangeNew = *pRange;
935 pRangeNew->Core.Key = PortLast;
936 pRangeNew->Port = PortLast;
937 pRangeNew->cPorts = pRangeNew->Core.KeyLast - PortLast + 1;
938
939 LogFlow(("IOMR3IOPortDeregister (rc): split the range; new %x\n", pRangeNew->Core.Key));
940
941 /* adjust head */
942 pRange->Core.KeyLast = Port - 1;
943 pRange->cPorts = Port - pRange->Port;
944
945 /* insert */
946 if (!RTAvlroIOPortInsert(&pVM->iom.s.pTreesR3->IOPortTreeRC, &pRangeNew->Core))
947 {
948 AssertMsgFailed(("This cannot happen!\n"));
949 MMHyperFree(pVM, pRangeNew);
950 rc = VERR_INTERNAL_ERROR;
951 }
952 break;
953 }
954 }
955 else /* next port */
956 Port++;
957 } /* for all ports - RC. */
958
959
960 /*
961 * Remove any R0 ranges.
962 */
963 Port = PortStart;
964 while (Port <= PortLast && Port >= PortStart)
965 {
966 /*
967 * Try find range.
968 */
969 PIOMIOPORTRANGER0 pRange = (PIOMIOPORTRANGER0)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesR3->IOPortTreeR0, Port);
970 if (pRange)
971 {
972 if ( pRange->Core.Key == Port
973 && pRange->Core.KeyLast <= PortLast)
974 {
975 /*
976 * Kick out the entire range.
977 */
978 void *pv = RTAvlroIOPortRemove(&pVM->iom.s.pTreesR3->IOPortTreeR0, Port);
979 Assert(pv == (void *)pRange); NOREF(pv);
980 Port += pRange->cPorts;
981 MMHyperFree(pVM, pRange);
982 }
983 else if (pRange->Core.Key == Port)
984 {
985 /*
986 * Cut of the head of the range, done.
987 */
988 pRange->cPorts -= Port - pRange->Port;
989 pRange->Core.Key = Port;
990 pRange->Port = Port;
991 break;
992 }
993 else if (pRange->Core.KeyLast <= PortLast)
994 {
995 /*
996 * Just cut of the tail.
997 */
998 unsigned c = pRange->Core.KeyLast - Port + 1;
999 pRange->Core.KeyLast -= c;
1000 pRange->cPorts -= c;
1001 Port += c;
1002 }
1003 else
1004 {
1005 /*
1006 * Split the range, done.
1007 */
1008 Assert(pRange->Core.KeyLast > PortLast && pRange->Core.Key < Port);
1009 /* create tail. */
1010 PIOMIOPORTRANGER0 pRangeNew;
1011 int rc2 = MMHyperAlloc(pVM, sizeof(*pRangeNew), 0, MM_TAG_IOM, (void **)&pRangeNew);
1012 if (RT_FAILURE(rc2))
1013 {
1014 iomUnlock(pVM);
1015 return rc2;
1016 }
1017 *pRangeNew = *pRange;
1018 pRangeNew->Core.Key = PortLast;
1019 pRangeNew->Port = PortLast;
1020 pRangeNew->cPorts = pRangeNew->Core.KeyLast - PortLast + 1;
1021
1022 LogFlow(("IOMR3IOPortDeregister (r0): split the range; new %x\n", pRangeNew->Core.Key));
1023
1024 /* adjust head */
1025 pRange->Core.KeyLast = Port - 1;
1026 pRange->cPorts = Port - pRange->Port;
1027
1028 /* insert */
1029 if (!RTAvlroIOPortInsert(&pVM->iom.s.pTreesR3->IOPortTreeR0, &pRangeNew->Core))
1030 {
1031 AssertMsgFailed(("This cannot happen!\n"));
1032 MMHyperFree(pVM, pRangeNew);
1033 rc = VERR_INTERNAL_ERROR;
1034 }
1035 break;
1036 }
1037 }
1038 else /* next port */
1039 Port++;
1040 } /* for all ports - R0. */
1041
1042 /*
1043 * And the same procedure for ring-3 ranges.
1044 */
1045 Port = PortStart;
1046 while (Port <= PortLast && Port >= PortStart)
1047 {
1048 /*
1049 * Try find range.
1050 */
1051 PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesR3->IOPortTreeR3, Port);
1052 if (pRange)
1053 {
1054 if ( pRange->Core.Key == Port
1055 && pRange->Core.KeyLast <= PortLast)
1056 {
1057 /*
1058 * Kick out the entire range.
1059 */
1060 void *pv = RTAvlroIOPortRemove(&pVM->iom.s.pTreesR3->IOPortTreeR3, Port);
1061 Assert(pv == (void *)pRange); NOREF(pv);
1062 Port += pRange->cPorts;
1063 MMHyperFree(pVM, pRange);
1064 }
1065 else if (pRange->Core.Key == Port)
1066 {
1067 /*
1068 * Cut of the head of the range, done.
1069 */
1070 pRange->cPorts -= Port - pRange->Port;
1071 pRange->Core.Key = Port;
1072 pRange->Port = Port;
1073 break;
1074 }
1075 else if (pRange->Core.KeyLast <= PortLast)
1076 {
1077 /*
1078 * Just cut of the tail.
1079 */
1080 unsigned c = pRange->Core.KeyLast - Port + 1;
1081 pRange->Core.KeyLast -= c;
1082 pRange->cPorts -= c;
1083 Port += c;
1084 }
1085 else
1086 {
1087 /*
1088 * Split the range, done.
1089 */
1090 Assert(pRange->Core.KeyLast > PortLast && pRange->Core.Key < Port);
1091 /* create tail. */
1092 PIOMIOPORTRANGER3 pRangeNew;
1093 int rc2 = MMHyperAlloc(pVM, sizeof(*pRangeNew), 0, MM_TAG_IOM, (void **)&pRangeNew);
1094 if (RT_FAILURE(rc2))
1095 {
1096 iomUnlock(pVM);
1097 return rc2;
1098 }
1099 *pRangeNew = *pRange;
1100 pRangeNew->Core.Key = PortLast;
1101 pRangeNew->Port = PortLast;
1102 pRangeNew->cPorts = pRangeNew->Core.KeyLast - PortLast + 1;
1103
1104 LogFlow(("IOMR3IOPortDeregister (r3): split the range; new %x\n", pRangeNew->Core.Key));
1105
1106 /* adjust head */
1107 pRange->Core.KeyLast = Port - 1;
1108 pRange->cPorts = Port - pRange->Port;
1109
1110 /* insert */
1111 if (!RTAvlroIOPortInsert(&pVM->iom.s.pTreesR3->IOPortTreeR3, &pRangeNew->Core))
1112 {
1113 AssertMsgFailed(("This cannot happen!\n"));
1114 MMHyperFree(pVM, pRangeNew);
1115 rc = VERR_INTERNAL_ERROR;
1116 }
1117 break;
1118 }
1119 }
1120 else /* next port */
1121 Port++;
1122 } /* for all ports - ring-3. */
1123
1124 /* done */
1125 iomUnlock(pVM);
1126 return rc;
1127}
1128
1129
1130/**
1131 * Dummy Port I/O Handler for IN operations.
1132 *
1133 * @returns VBox status code.
1134 *
1135 * @param pDevIns The device instance.
1136 * @param pvUser User argument.
1137 * @param Port Port number used for the IN operation.
1138 * @param pu32 Where to store the result.
1139 * @param cb Number of bytes read.
1140 */
1141static DECLCALLBACK(int) iomR3IOPortDummyIn(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1142{
1143 switch (cb)
1144 {
1145 case 1: *pu32 = 0xff; break;
1146 case 2: *pu32 = 0xffff; break;
1147 case 4: *pu32 = UINT32_C(0xffffffff); break;
1148 default:
1149 AssertReleaseMsgFailed(("cb=%d\n", cb));
1150 return VERR_INTERNAL_ERROR;
1151 }
1152 return VINF_SUCCESS;
1153}
1154
1155
1156/**
1157 * Dummy Port I/O Handler for string IN operations.
1158 *
1159 * @returns VBox status code.
1160 *
1161 * @param pDevIns The device instance.
1162 * @param pvUser User argument.
1163 * @param Port Port number used for the string IN operation.
1164 * @param pGCPtrDst Pointer to the destination buffer (GC, incremented appropriately).
1165 * @param pcTransfer Pointer to the number of transfer units to read, on return remaining transfer units.
1166 * @param cb Size of the transfer unit (1, 2 or 4 bytes).
1167 */
1168static DECLCALLBACK(int) iomR3IOPortDummyInStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfer, unsigned cb)
1169{
1170 return VINF_SUCCESS;
1171}
1172
1173
1174/**
1175 * Dummy Port I/O Handler for OUT operations.
1176 *
1177 * @returns VBox status code.
1178 *
1179 * @param pDevIns The device instance.
1180 * @param pvUser User argument.
1181 * @param Port Port number used for the OUT operation.
1182 * @param u32 The value to output.
1183 * @param cb The value size in bytes.
1184 */
1185static DECLCALLBACK(int) iomR3IOPortDummyOut(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1186{
1187 return VINF_SUCCESS;
1188}
1189
1190
1191/**
1192 * Dummy Port I/O Handler for string OUT operations.
1193 *
1194 * @returns VBox status code.
1195 *
1196 * @param pDevIns The device instance.
1197 * @param pvUser User argument.
1198 * @param Port Port number used for the string OUT operation.
1199 * @param pGCPtrSrc Pointer to the source buffer (GC, incremented appropriately).
1200 * @param pcTransfer Pointer to the number of transfer units to write, on return remaining transfer units.
1201 * @param cb Size of the transfer unit (1, 2 or 4 bytes).
1202 */
1203static DECLCALLBACK(int) iomR3IOPortDummyOutStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfer, unsigned cb)
1204{
1205 return VINF_SUCCESS;
1206}
1207
1208
1209/**
1210 * Display a single I/O port ring-3 range.
1211 *
1212 * @returns 0
1213 * @param pNode Pointer to I/O port HC range.
1214 * @param pvUser Pointer to info output callback structure.
1215 */
1216static DECLCALLBACK(int) iomR3IOPortInfoOneR3(PAVLROIOPORTNODECORE pNode, void *pvUser)
1217{
1218 PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)pNode;
1219 PCDBGFINFOHLP pHlp = (PCDBGFINFOHLP)pvUser;
1220 pHlp->pfnPrintf(pHlp,
1221 "%04x-%04x %p %p %p %p %s\n",
1222 pRange->Core.Key,
1223 pRange->Core.KeyLast,
1224 pRange->pDevIns,
1225 pRange->pfnInCallback,
1226 pRange->pfnOutCallback,
1227 pRange->pvUser,
1228 pRange->pszDesc);
1229 return 0;
1230}
1231
1232
1233/**
1234 * Display a single I/O port GC range.
1235 *
1236 * @returns 0
1237 * @param pNode Pointer to IOPORT GC range.
1238 * @param pvUser Pointer to info output callback structure.
1239 */
1240static DECLCALLBACK(int) iomR3IOPortInfoOneRC(PAVLROIOPORTNODECORE pNode, void *pvUser)
1241{
1242 PIOMIOPORTRANGERC pRange = (PIOMIOPORTRANGERC)pNode;
1243 PCDBGFINFOHLP pHlp = (PCDBGFINFOHLP)pvUser;
1244 pHlp->pfnPrintf(pHlp,
1245 "%04x-%04x %RRv %RRv %RRv %RRv %s\n",
1246 pRange->Core.Key,
1247 pRange->Core.KeyLast,
1248 pRange->pDevIns,
1249 pRange->pfnInCallback,
1250 pRange->pfnOutCallback,
1251 pRange->pvUser,
1252 pRange->pszDesc);
1253 return 0;
1254}
1255
1256
1257/**
1258 * Display all registered I/O port ranges.
1259 *
1260 * @param pVM VM Handle.
1261 * @param pHlp The info helpers.
1262 * @param pszArgs Arguments, ignored.
1263 */
1264static DECLCALLBACK(void) iomR3IOPortInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs)
1265{
1266 NOREF(pszArgs);
1267 pHlp->pfnPrintf(pHlp,
1268 "I/O Port R3 ranges (pVM=%p)\n"
1269 "Range %.*s %.*s %.*s %.*s Description\n",
1270 pVM,
1271 sizeof(RTHCPTR) * 2, "pDevIns ",
1272 sizeof(RTHCPTR) * 2, "In ",
1273 sizeof(RTHCPTR) * 2, "Out ",
1274 sizeof(RTHCPTR) * 2, "pvUser ");
1275 RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesR3->IOPortTreeR3, true, iomR3IOPortInfoOneR3, (void *)pHlp);
1276
1277 pHlp->pfnPrintf(pHlp,
1278 "I/O Port R0 ranges (pVM=%p)\n"
1279 "Range %.*s %.*s %.*s %.*s Description\n",
1280 pVM,
1281 sizeof(RTHCPTR) * 2, "pDevIns ",
1282 sizeof(RTHCPTR) * 2, "In ",
1283 sizeof(RTHCPTR) * 2, "Out ",
1284 sizeof(RTHCPTR) * 2, "pvUser ");
1285 RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesR3->IOPortTreeR0, true, iomR3IOPortInfoOneR3, (void *)pHlp);
1286
1287 pHlp->pfnPrintf(pHlp,
1288 "I/O Port GC ranges (pVM=%p)\n"
1289 "Range %.*s %.*s %.*s %.*s Description\n",
1290 pVM,
1291 sizeof(RTRCPTR) * 2, "pDevIns ",
1292 sizeof(RTRCPTR) * 2, "In ",
1293 sizeof(RTRCPTR) * 2, "Out ",
1294 sizeof(RTRCPTR) * 2, "pvUser ");
1295 RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesR3->IOPortTreeRC, true, iomR3IOPortInfoOneRC, (void *)pHlp);
1296
1297 if (pVM->iom.s.pRangeLastReadRC)
1298 {
1299 PIOMIOPORTRANGERC pRange = (PIOMIOPORTRANGERC)MMHyperRCToCC(pVM, pVM->iom.s.pRangeLastReadRC);
1300 pHlp->pfnPrintf(pHlp, "RC Read Ports: %#04x-%#04x %RRv %s\n",
1301 pRange->Port, pRange->Port + pRange->cPorts, pVM->iom.s.pRangeLastReadRC, pRange->pszDesc);
1302 }
1303 if (pVM->iom.s.pStatsLastReadRC)
1304 {
1305 PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperRCToCC(pVM, pVM->iom.s.pStatsLastReadRC);
1306 pHlp->pfnPrintf(pHlp, "RC Read Stats: %#04x %RRv\n",
1307 pRange->Core.Key, pVM->iom.s.pStatsLastReadRC);
1308 }
1309
1310 if (pVM->iom.s.pRangeLastWriteRC)
1311 {
1312 PIOMIOPORTRANGERC pRange = (PIOMIOPORTRANGERC)MMHyperRCToCC(pVM, pVM->iom.s.pRangeLastWriteRC);
1313 pHlp->pfnPrintf(pHlp, "RC Write Ports: %#04x-%#04x %RRv %s\n",
1314 pRange->Port, pRange->Port + pRange->cPorts, pVM->iom.s.pRangeLastWriteRC, pRange->pszDesc);
1315 }
1316 if (pVM->iom.s.pStatsLastWriteRC)
1317 {
1318 PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperRCToCC(pVM, pVM->iom.s.pStatsLastWriteRC);
1319 pHlp->pfnPrintf(pHlp, "RC Write Stats: %#04x %RRv\n",
1320 pRange->Core.Key, pVM->iom.s.pStatsLastWriteRC);
1321 }
1322
1323 if (pVM->iom.s.pRangeLastReadR3)
1324 {
1325 PIOMIOPORTRANGER3 pRange = pVM->iom.s.pRangeLastReadR3;
1326 pHlp->pfnPrintf(pHlp, "R3 Read Ports: %#04x-%#04x %p %s\n",
1327 pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc);
1328 }
1329 if (pVM->iom.s.pStatsLastReadR3)
1330 {
1331 PIOMIOPORTSTATS pRange = pVM->iom.s.pStatsLastReadR3;
1332 pHlp->pfnPrintf(pHlp, "R3 Read Stats: %#04x %p\n",
1333 pRange->Core.Key, pRange);
1334 }
1335
1336 if (pVM->iom.s.pRangeLastWriteR3)
1337 {
1338 PIOMIOPORTRANGER3 pRange = pVM->iom.s.pRangeLastWriteR3;
1339 pHlp->pfnPrintf(pHlp, "R3 Write Ports: %#04x-%#04x %p %s\n",
1340 pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc);
1341 }
1342 if (pVM->iom.s.pStatsLastWriteR3)
1343 {
1344 PIOMIOPORTSTATS pRange = pVM->iom.s.pStatsLastWriteR3;
1345 pHlp->pfnPrintf(pHlp, "R3 Write Stats: %#04x %p\n",
1346 pRange->Core.Key, pRange);
1347 }
1348
1349 if (pVM->iom.s.pRangeLastReadR0)
1350 {
1351 PIOMIOPORTRANGER0 pRange = (PIOMIOPORTRANGER0)MMHyperR0ToCC(pVM, pVM->iom.s.pRangeLastReadR0);
1352 pHlp->pfnPrintf(pHlp, "R0 Read Ports: %#04x-%#04x %p %s\n",
1353 pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc);
1354 }
1355 if (pVM->iom.s.pStatsLastReadR0)
1356 {
1357 PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperR0ToCC(pVM, pVM->iom.s.pStatsLastReadR0);
1358 pHlp->pfnPrintf(pHlp, "R0 Read Stats: %#04x %p\n",
1359 pRange->Core.Key, pRange);
1360 }
1361
1362 if (pVM->iom.s.pRangeLastWriteR0)
1363 {
1364 PIOMIOPORTRANGER0 pRange = (PIOMIOPORTRANGER0)MMHyperR0ToCC(pVM, pVM->iom.s.pRangeLastWriteR0);
1365 pHlp->pfnPrintf(pHlp, "R0 Write Ports: %#04x-%#04x %p %s\n",
1366 pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc);
1367 }
1368 if (pVM->iom.s.pStatsLastWriteR0)
1369 {
1370 PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperR0ToCC(pVM, pVM->iom.s.pStatsLastWriteR0);
1371 pHlp->pfnPrintf(pHlp, "R0 Write Stats: %#04x %p\n",
1372 pRange->Core.Key, pRange);
1373 }
1374}
1375
1376
1377/**
1378 * Registers a Memory Mapped I/O R3 handler.
1379 *
1380 * This API is called by PDM on behalf of a device. Devices must register ring-3 ranges
1381 * before any GC and R0 ranges can be registered using IOMR3MMIORegisterRC() and IOMR3MMIORegisterR0().
1382 *
1383 * @returns VBox status code.
1384 *
1385 * @param pVM VM handle.
1386 * @param pDevIns PDM device instance owning the MMIO range.
1387 * @param GCPhysStart First physical address in the range.
1388 * @param cbRange The size of the range (in bytes).
1389 * @param pvUser User argument for the callbacks.
1390 * @param pfnWriteCallback Pointer to function which is gonna handle Write operations.
1391 * @param pfnReadCallback Pointer to function which is gonna handle Read operations.
1392 * @param pfnFillCallback Pointer to function which is gonna handle Fill/memset operations.
1393 * @param pszDesc Pointer to description string. This must not be freed.
1394 */
1395VMMR3DECL(int) IOMR3MMIORegisterR3(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTHCPTR pvUser,
1396 R3PTRTYPE(PFNIOMMMIOWRITE) pfnWriteCallback, R3PTRTYPE(PFNIOMMMIOREAD) pfnReadCallback,
1397 R3PTRTYPE(PFNIOMMMIOFILL) pfnFillCallback, const char *pszDesc)
1398{
1399 LogFlow(("IOMR3MMIORegisterR3: pDevIns=%p GCPhysStart=%RGp cbRange=%#x pvUser=%RHv pfnWriteCallback=%#x pfnReadCallback=%#x pfnFillCallback=%#x pszDesc=%s\n",
1400 pDevIns, GCPhysStart, cbRange, pvUser, pfnWriteCallback, pfnReadCallback, pfnFillCallback, pszDesc));
1401 int rc;
1402
1403 /*
1404 * Validate input.
1405 */
1406 if (GCPhysStart + (cbRange - 1) < GCPhysStart)
1407 {
1408 AssertMsgFailed(("Wrapped! %RGp %#x bytes\n", GCPhysStart, cbRange));
1409 return VERR_IOM_INVALID_MMIO_RANGE;
1410 }
1411 /** @todo implement per-device locks for MMIO access. */
1412 AssertReturn(!pDevIns->pCritSectR3, VERR_INTERNAL_ERROR_2);
1413
1414 /*
1415 * Resolve the GC/R0 handler addresses lazily because of init order.
1416 */
1417 if (pVM->iom.s.pfnMMIOHandlerR0 == NIL_RTR0PTR)
1418 {
1419 rc = PDMR3LdrGetSymbolRCLazy(pVM, NULL, "IOMMMIOHandler", &pVM->iom.s.pfnMMIOHandlerRC);
1420 AssertLogRelRCReturn(rc, rc);
1421 rc = PDMR3LdrGetSymbolR0Lazy(pVM, NULL, "IOMMMIOHandler", &pVM->iom.s.pfnMMIOHandlerR0);
1422 AssertLogRelRCReturn(rc, rc);
1423 }
1424
1425 /*
1426 * For the 2nd+ instance, mangle the description string so it's unique.
1427 * (PGM requires this.)
1428 */
1429 if (pDevIns->iInstance > 0) /** @todo Move to PDMDevHlp.cpp and use a string cache. */
1430 {
1431 pszDesc = MMR3HeapAPrintf(pVM, MM_TAG_IOM, "%s [%u]", pszDesc, pDevIns->iInstance);
1432 if (!pszDesc)
1433 return VERR_NO_MEMORY;
1434 }
1435
1436
1437 /*
1438 * Allocate new range record and initialize it.
1439 */
1440 PIOMMMIORANGE pRange;
1441 rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange);
1442 if (RT_SUCCESS(rc))
1443 {
1444 pRange->Core.Key = GCPhysStart;
1445 pRange->Core.KeyLast = GCPhysStart + (cbRange - 1);
1446 pRange->GCPhys = GCPhysStart;
1447 pRange->cb = cbRange;
1448 pRange->pszDesc = pszDesc;
1449
1450 pRange->pvUserR3 = pvUser;
1451 pRange->pDevInsR3 = pDevIns;
1452 pRange->pfnReadCallbackR3 = pfnReadCallback;
1453 pRange->pfnWriteCallbackR3 = pfnWriteCallback;
1454 pRange->pfnFillCallbackR3 = pfnFillCallback;
1455
1456 //pRange->pvUserR0 = NIL_RTR0PTR;
1457 //pRange->pDevInsR0 = NIL_RTR0PTR;
1458 //pRange->pfnReadCallbackR0 = NIL_RTR0PTR;
1459 //pRange->pfnWriteCallbackR0 = NIL_RTR0PTR;
1460 //pRange->pfnFillCallbackR0 = NIL_RTR0PTR;
1461
1462 //pRange->pvUserRC = NIL_RTRCPTR;
1463 //pRange->pDevInsRC = NIL_RTRCPTR;
1464 //pRange->pfnReadCallbackRC = NIL_RTRCPTR;
1465 //pRange->pfnWriteCallbackRC = NIL_RTRCPTR;
1466 //pRange->pfnFillCallbackRC = NIL_RTRCPTR;
1467
1468 /*
1469 * Try register it with PGM and then insert it into the tree.
1470 */
1471 iomLock(pVM);
1472 iomR3FlushCache(pVM);
1473 rc = PGMR3PhysMMIORegister(pVM, GCPhysStart, cbRange,
1474 IOMR3MMIOHandler, pRange,
1475 pVM->iom.s.pfnMMIOHandlerR0, MMHyperR3ToR0(pVM, pRange),
1476 pVM->iom.s.pfnMMIOHandlerRC, MMHyperR3ToRC(pVM, pRange), pszDesc);
1477 if (RT_SUCCESS(rc))
1478 {
1479 if (RTAvlroGCPhysInsert(&pVM->iom.s.pTreesR3->MMIOTree, &pRange->Core))
1480 {
1481 iomUnlock(pVM);
1482 return VINF_SUCCESS;
1483 }
1484
1485 /* bail out */
1486 iomUnlock(pVM);
1487 DBGFR3Info(pVM, "mmio", NULL, NULL);
1488 AssertMsgFailed(("This cannot happen!\n"));
1489 rc = VERR_INTERNAL_ERROR;
1490 }
1491 else
1492 iomUnlock(pVM);
1493
1494 MMHyperFree(pVM, pRange);
1495 }
1496 if (pDevIns->iInstance > 0)
1497 MMR3HeapFree((void *)pszDesc);
1498 return rc;
1499}
1500
1501
1502/**
1503 * Registers a Memory Mapped I/O RC handler range.
1504 *
1505 * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges
1506 * using IOMMMIORegisterR3() before calling this function.
1507 *
1508 *
1509 * @returns VBox status code.
1510 *
1511 * @param pVM VM handle.
1512 * @param pDevIns PDM device instance owning the MMIO range.
1513 * @param GCPhysStart First physical address in the range.
1514 * @param cbRange The size of the range (in bytes).
1515 * @param pvUser User argument for the callbacks.
1516 * @param pfnWriteCallback Pointer to function which is gonna handle Write operations.
1517 * @param pfnReadCallback Pointer to function which is gonna handle Read operations.
1518 * @param pfnFillCallback Pointer to function which is gonna handle Fill/memset operations.
1519 */
1520VMMR3DECL(int) IOMR3MMIORegisterRC(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTGCPTR pvUser,
1521 RCPTRTYPE(PFNIOMMMIOWRITE) pfnWriteCallback, RCPTRTYPE(PFNIOMMMIOREAD) pfnReadCallback,
1522 RCPTRTYPE(PFNIOMMMIOFILL) pfnFillCallback)
1523{
1524 LogFlow(("IOMR3MMIORegisterRC: pDevIns=%p GCPhysStart=%RGp cbRange=%#x pvUser=%RGv pfnWriteCallback=%#x pfnReadCallback=%#x pfnFillCallback=%#x\n",
1525 pDevIns, GCPhysStart, cbRange, pvUser, pfnWriteCallback, pfnReadCallback, pfnFillCallback));
1526
1527 /*
1528 * Validate input.
1529 */
1530 if (!pfnWriteCallback && !pfnReadCallback)
1531 {
1532 AssertMsgFailed(("No callbacks! %RGp LB%#x %s\n", GCPhysStart, cbRange));
1533 return VERR_INVALID_PARAMETER;
1534 }
1535
1536 /*
1537 * Find the MMIO range and check that the input matches.
1538 */
1539 iomLock(pVM);
1540 PIOMMMIORANGE pRange = iomMMIOGetRange(&pVM->iom.s, GCPhysStart);
1541 AssertReturnStmt(pRange, iomUnlock(pVM), VERR_IOM_MMIO_RANGE_NOT_FOUND);
1542 AssertReturnStmt(pRange->pDevInsR3 == pDevIns, iomUnlock(pVM), VERR_IOM_NOT_MMIO_RANGE_OWNER);
1543 AssertReturnStmt(pRange->GCPhys == GCPhysStart, iomUnlock(pVM), VERR_IOM_INVALID_MMIO_RANGE);
1544 AssertReturnStmt(pRange->cb == cbRange, iomUnlock(pVM), VERR_IOM_INVALID_MMIO_RANGE);
1545
1546 pRange->pvUserRC = pvUser;
1547 pRange->pfnReadCallbackRC = pfnReadCallback;
1548 pRange->pfnWriteCallbackRC= pfnWriteCallback;
1549 pRange->pfnFillCallbackRC = pfnFillCallback;
1550 pRange->pDevInsRC = MMHyperCCToRC(pVM, pDevIns);
1551 iomUnlock(pVM);
1552
1553 return VINF_SUCCESS;
1554}
1555
1556
1557/**
1558 * Registers a Memory Mapped I/O R0 handler range.
1559 *
1560 * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges
1561 * using IOMMR3MIORegisterHC() before calling this function.
1562 *
1563 *
1564 * @returns VBox status code.
1565 *
1566 * @param pVM VM handle.
1567 * @param pDevIns PDM device instance owning the MMIO range.
1568 * @param GCPhysStart First physical address in the range.
1569 * @param cbRange The size of the range (in bytes).
1570 * @param pvUser User argument for the callbacks.
1571 * @param pfnWriteCallback Pointer to function which is gonna handle Write operations.
1572 * @param pfnReadCallback Pointer to function which is gonna handle Read operations.
1573 * @param pfnFillCallback Pointer to function which is gonna handle Fill/memset operations.
1574 */
1575VMMR3DECL(int) IOMR3MMIORegisterR0(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTR0PTR pvUser,
1576 R0PTRTYPE(PFNIOMMMIOWRITE) pfnWriteCallback,
1577 R0PTRTYPE(PFNIOMMMIOREAD) pfnReadCallback,
1578 R0PTRTYPE(PFNIOMMMIOFILL) pfnFillCallback)
1579{
1580 LogFlow(("IOMR3MMIORegisterR0: pDevIns=%p GCPhysStart=%RGp cbRange=%#x pvUser=%RHv pfnWriteCallback=%#x pfnReadCallback=%#x pfnFillCallback=%#x\n",
1581 pDevIns, GCPhysStart, cbRange, pvUser, pfnWriteCallback, pfnReadCallback, pfnFillCallback));
1582
1583 /*
1584 * Validate input.
1585 */
1586 if (!pfnWriteCallback && !pfnReadCallback)
1587 {
1588 AssertMsgFailed(("No callbacks! %RGp LB%#x %s\n", GCPhysStart, cbRange));
1589 return VERR_INVALID_PARAMETER;
1590 }
1591
1592 /*
1593 * Find the MMIO range and check that the input matches.
1594 */
1595 iomLock(pVM);
1596 PIOMMMIORANGE pRange = iomMMIOGetRange(&pVM->iom.s, GCPhysStart);
1597 AssertReturnStmt(pRange, iomUnlock(pVM), VERR_IOM_MMIO_RANGE_NOT_FOUND);
1598 AssertReturnStmt(pRange->pDevInsR3 == pDevIns, iomUnlock(pVM), VERR_IOM_NOT_MMIO_RANGE_OWNER);
1599 AssertReturnStmt(pRange->GCPhys == GCPhysStart, iomUnlock(pVM), VERR_IOM_INVALID_MMIO_RANGE);
1600 AssertReturnStmt(pRange->cb == cbRange, iomUnlock(pVM), VERR_IOM_INVALID_MMIO_RANGE);
1601
1602 pRange->pvUserR0 = pvUser;
1603 pRange->pfnReadCallbackR0 = pfnReadCallback;
1604 pRange->pfnWriteCallbackR0= pfnWriteCallback;
1605 pRange->pfnFillCallbackR0 = pfnFillCallback;
1606 pRange->pDevInsR0 = MMHyperCCToR0(pVM, pDevIns);
1607 iomUnlock(pVM);
1608
1609 return VINF_SUCCESS;
1610}
1611
1612
1613/**
1614 * Deregisters a Memory Mapped I/O handler range.
1615 *
1616 * Registered GC, R0, and R3 ranges are affected.
1617 *
1618 * @returns VBox status code.
1619 *
1620 * @param pVM The virtual machine.
1621 * @param pDevIns Device instance which the MMIO region is registered.
1622 * @param GCPhysStart First physical address (GC) in the range.
1623 * @param cbRange Number of bytes to deregister.
1624 *
1625 * @remark This function mainly for PCI PnP Config and will not do
1626 * all the checks you might expect it to do.
1627 */
1628VMMR3DECL(int) IOMR3MMIODeregister(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange)
1629{
1630 LogFlow(("IOMR3MMIODeregister: pDevIns=%p GCPhysStart=%RGp cbRange=%#x\n", pDevIns, GCPhysStart, cbRange));
1631
1632 /*
1633 * Validate input.
1634 */
1635 RTGCPHYS GCPhysLast = GCPhysStart + (cbRange - 1);
1636 if (GCPhysLast < GCPhysStart)
1637 {
1638 AssertMsgFailed(("Wrapped! %#x LB%#x\n", GCPhysStart, cbRange));
1639 return VERR_IOM_INVALID_MMIO_RANGE;
1640 }
1641
1642 iomLock(pVM);
1643
1644 /*
1645 * Check ownership and such for the entire area.
1646 */
1647 RTGCPHYS GCPhys = GCPhysStart;
1648 while (GCPhys <= GCPhysLast && GCPhys >= GCPhysStart)
1649 {
1650 PIOMMMIORANGE pRange = iomMMIOGetRange(&pVM->iom.s, GCPhys);
1651 if (!pRange)
1652 {
1653 iomUnlock(pVM);
1654 return VERR_IOM_MMIO_RANGE_NOT_FOUND;
1655 }
1656 AssertMsgReturnStmt(pRange->pDevInsR3 == pDevIns,
1657 ("Not owner! GCPhys=%RGp %RGp LB%#x %s\n", GCPhys, GCPhysStart, cbRange, pRange->pszDesc),
1658 iomUnlock(pVM),
1659 VERR_IOM_NOT_MMIO_RANGE_OWNER);
1660 AssertMsgReturnStmt(pRange->Core.KeyLast <= GCPhysLast,
1661 ("Incomplete R3 range! GCPhys=%RGp %RGp LB%#x %s\n", GCPhys, GCPhysStart, cbRange, pRange->pszDesc),
1662 iomUnlock(pVM),
1663 VERR_IOM_INCOMPLETE_MMIO_RANGE);
1664
1665 /* next */
1666 Assert(GCPhys <= pRange->Core.KeyLast);
1667 GCPhys = pRange->Core.KeyLast + 1;
1668 }
1669
1670 /*
1671 * Do the actual removing of the MMIO ranges.
1672 */
1673 GCPhys = GCPhysStart;
1674 while (GCPhys <= GCPhysLast && GCPhys >= GCPhysStart)
1675 {
1676 iomR3FlushCache(pVM);
1677
1678 PIOMMMIORANGE pRange = (PIOMMMIORANGE)RTAvlroGCPhysRemove(&pVM->iom.s.pTreesR3->MMIOTree, GCPhys);
1679 Assert(pRange);
1680 Assert(pRange->Core.Key == GCPhys && pRange->Core.KeyLast <= GCPhysLast);
1681 iomUnlock(pVM);
1682
1683 /* remove it from PGM */
1684 int rc = PGMR3PhysMMIODeregister(pVM, GCPhys, pRange->cb);
1685 AssertRC(rc);
1686
1687 iomLock(pVM);
1688
1689 /* advance and free. */
1690 GCPhys = pRange->Core.KeyLast + 1;
1691 if (pDevIns->iInstance > 0)
1692 MMR3HeapFree((void *)pRange->pszDesc);
1693 MMHyperFree(pVM, pRange);
1694 }
1695
1696 iomUnlock(pVM);
1697 return VINF_SUCCESS;
1698}
1699
1700
1701/**
1702 * Release the IOM lock if owned by the current VCPU
1703 *
1704 * @param pVM The VM to operate on.
1705 */
1706VMMR3DECL(void) IOMR3ReleaseOwnedLocks(PVM pVM)
1707{
1708 while (PDMCritSectIsOwner(&pVM->iom.s.EmtLock))
1709 PDMCritSectLeave(&pVM->iom.s.EmtLock);
1710}
1711
1712
1713/**
1714 * For TM only!
1715 *
1716 * @returns Pointer to the critical section.
1717 * @param pVM The VM handle.
1718 */
1719VMMR3DECL(PPDMCRITSECT) IOMR3GetCritSect(PVM pVM)
1720{
1721 return &pVM->iom.s.EmtLock;
1722}
1723
1724
1725/**
1726 * Display a single MMIO range.
1727 *
1728 * @returns 0
1729 * @param pNode Pointer to MMIO R3 range.
1730 * @param pvUser Pointer to info output callback structure.
1731 */
1732static DECLCALLBACK(int) iomR3MMIOInfoOne(PAVLROGCPHYSNODECORE pNode, void *pvUser)
1733{
1734 PIOMMMIORANGE pRange = (PIOMMMIORANGE)pNode;
1735 PCDBGFINFOHLP pHlp = (PCDBGFINFOHLP)pvUser;
1736 pHlp->pfnPrintf(pHlp,
1737 "%RGp-%RGp %RHv %RHv %RHv %RHv %RHv %s\n",
1738 pRange->Core.Key,
1739 pRange->Core.KeyLast,
1740 pRange->pDevInsR3,
1741 pRange->pfnReadCallbackR3,
1742 pRange->pfnWriteCallbackR3,
1743 pRange->pfnFillCallbackR3,
1744 pRange->pvUserR3,
1745 pRange->pszDesc);
1746 pHlp->pfnPrintf(pHlp,
1747 "%*s %RHv %RHv %RHv %RHv %RHv\n",
1748 sizeof(RTGCPHYS) * 2 * 2 + 1, "R0",
1749 pRange->pDevInsR0,
1750 pRange->pfnReadCallbackR0,
1751 pRange->pfnWriteCallbackR0,
1752 pRange->pfnFillCallbackR0,
1753 pRange->pvUserR0);
1754 pHlp->pfnPrintf(pHlp,
1755 "%*s %RRv %RRv %RRv %RRv %RRv\n",
1756 sizeof(RTGCPHYS) * 2 * 2 + 1, "RC",
1757 pRange->pDevInsRC,
1758 pRange->pfnReadCallbackRC,
1759 pRange->pfnWriteCallbackRC,
1760 pRange->pfnFillCallbackRC,
1761 pRange->pvUserRC);
1762 return 0;
1763}
1764
1765
1766/**
1767 * Display registered MMIO ranges to the log.
1768 *
1769 * @param pVM VM Handle.
1770 * @param pHlp The info helpers.
1771 * @param pszArgs Arguments, ignored.
1772 */
1773static DECLCALLBACK(void) iomR3MMIOInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs)
1774{
1775 NOREF(pszArgs);
1776 pHlp->pfnPrintf(pHlp,
1777 "MMIO ranges (pVM=%p)\n"
1778 "%.*s %.*s %.*s %.*s %.*s %.*s %s\n",
1779 pVM,
1780 sizeof(RTGCPHYS) * 4 + 1, "GC Phys Range ",
1781 sizeof(RTHCPTR) * 2, "pDevIns ",
1782 sizeof(RTHCPTR) * 2, "Read ",
1783 sizeof(RTHCPTR) * 2, "Write ",
1784 sizeof(RTHCPTR) * 2, "Fill ",
1785 sizeof(RTHCPTR) * 2, "pvUser ",
1786 "Description");
1787 RTAvlroGCPhysDoWithAll(&pVM->iom.s.pTreesR3->MMIOTree, true, iomR3MMIOInfoOne, (void *)pHlp);
1788}
1789
1790
1791#ifdef VBOX_WITH_STATISTICS
1792/**
1793 * Tries to come up with the standard name for a port.
1794 *
1795 * @returns Pointer to readonly string if known.
1796 * @returns NULL if unknown port number.
1797 *
1798 * @param Port The port to name.
1799 */
1800static const char *iomR3IOPortGetStandardName(RTIOPORT Port)
1801{
1802 switch (Port)
1803 {
1804 case 0x00: case 0x10: case 0x20: case 0x30: case 0x40: case 0x50: case 0x70:
1805 case 0x01: case 0x11: case 0x21: case 0x31: case 0x41: case 0x51: case 0x61: case 0x71:
1806 case 0x02: case 0x12: case 0x22: case 0x32: case 0x42: case 0x52: case 0x62: case 0x72:
1807 case 0x03: case 0x13: case 0x23: case 0x33: case 0x43: case 0x53: case 0x63: case 0x73:
1808 case 0x04: case 0x14: case 0x24: case 0x34: case 0x44: case 0x54: case 0x74:
1809 case 0x05: case 0x15: case 0x25: case 0x35: case 0x45: case 0x55: case 0x65: case 0x75:
1810 case 0x06: case 0x16: case 0x26: case 0x36: case 0x46: case 0x56: case 0x66: case 0x76:
1811 case 0x07: case 0x17: case 0x27: case 0x37: case 0x47: case 0x57: case 0x67: case 0x77:
1812 case 0x08: case 0x18: case 0x28: case 0x38: case 0x48: case 0x58: case 0x68: case 0x78:
1813 case 0x09: case 0x19: case 0x29: case 0x39: case 0x49: case 0x59: case 0x69: case 0x79:
1814 case 0x0a: case 0x1a: case 0x2a: case 0x3a: case 0x4a: case 0x5a: case 0x6a: case 0x7a:
1815 case 0x0b: case 0x1b: case 0x2b: case 0x3b: case 0x4b: case 0x5b: case 0x6b: case 0x7b:
1816 case 0x0c: case 0x1c: case 0x2c: case 0x3c: case 0x4c: case 0x5c: case 0x6c: case 0x7c:
1817 case 0x0d: case 0x1d: case 0x2d: case 0x3d: case 0x4d: case 0x5d: case 0x6d: case 0x7d:
1818 case 0x0e: case 0x1e: case 0x2e: case 0x3e: case 0x4e: case 0x5e: case 0x6e: case 0x7e:
1819 case 0x0f: case 0x1f: case 0x2f: case 0x3f: case 0x4f: case 0x5f: case 0x6f: case 0x7f:
1820
1821 case 0x80: case 0x90: case 0xa0: case 0xb0: case 0xc0: case 0xd0: case 0xe0: case 0xf0:
1822 case 0x81: case 0x91: case 0xa1: case 0xb1: case 0xc1: case 0xd1: case 0xe1: case 0xf1:
1823 case 0x82: case 0x92: case 0xa2: case 0xb2: case 0xc2: case 0xd2: case 0xe2: case 0xf2:
1824 case 0x83: case 0x93: case 0xa3: case 0xb3: case 0xc3: case 0xd3: case 0xe3: case 0xf3:
1825 case 0x84: case 0x94: case 0xa4: case 0xb4: case 0xc4: case 0xd4: case 0xe4: case 0xf4:
1826 case 0x85: case 0x95: case 0xa5: case 0xb5: case 0xc5: case 0xd5: case 0xe5: case 0xf5:
1827 case 0x86: case 0x96: case 0xa6: case 0xb6: case 0xc6: case 0xd6: case 0xe6: case 0xf6:
1828 case 0x87: case 0x97: case 0xa7: case 0xb7: case 0xc7: case 0xd7: case 0xe7: case 0xf7:
1829 case 0x88: case 0x98: case 0xa8: case 0xb8: case 0xc8: case 0xd8: case 0xe8: case 0xf8:
1830 case 0x89: case 0x99: case 0xa9: case 0xb9: case 0xc9: case 0xd9: case 0xe9: case 0xf9:
1831 case 0x8a: case 0x9a: case 0xaa: case 0xba: case 0xca: case 0xda: case 0xea: case 0xfa:
1832 case 0x8b: case 0x9b: case 0xab: case 0xbb: case 0xcb: case 0xdb: case 0xeb: case 0xfb:
1833 case 0x8c: case 0x9c: case 0xac: case 0xbc: case 0xcc: case 0xdc: case 0xec: case 0xfc:
1834 case 0x8d: case 0x9d: case 0xad: case 0xbd: case 0xcd: case 0xdd: case 0xed: case 0xfd:
1835 case 0x8e: case 0x9e: case 0xae: case 0xbe: case 0xce: case 0xde: case 0xee: case 0xfe:
1836 case 0x8f: case 0x9f: case 0xaf: case 0xbf: case 0xcf: case 0xdf: case 0xef: case 0xff:
1837 return "System Reserved";
1838
1839 case 0x60:
1840 case 0x64:
1841 return "Keyboard & Mouse";
1842
1843 case 0x378:
1844 case 0x379:
1845 case 0x37a:
1846 case 0x37b:
1847 case 0x37c:
1848 case 0x37d:
1849 case 0x37e:
1850 case 0x37f:
1851 case 0x3bc:
1852 case 0x3bd:
1853 case 0x3be:
1854 case 0x3bf:
1855 case 0x278:
1856 case 0x279:
1857 case 0x27a:
1858 case 0x27b:
1859 case 0x27c:
1860 case 0x27d:
1861 case 0x27e:
1862 case 0x27f:
1863 return "LPT1/2/3";
1864
1865 case 0x3f8:
1866 case 0x3f9:
1867 case 0x3fa:
1868 case 0x3fb:
1869 case 0x3fc:
1870 case 0x3fd:
1871 case 0x3fe:
1872 case 0x3ff:
1873 return "COM1";
1874
1875 case 0x2f8:
1876 case 0x2f9:
1877 case 0x2fa:
1878 case 0x2fb:
1879 case 0x2fc:
1880 case 0x2fd:
1881 case 0x2fe:
1882 case 0x2ff:
1883 return "COM2";
1884
1885 case 0x3e8:
1886 case 0x3e9:
1887 case 0x3ea:
1888 case 0x3eb:
1889 case 0x3ec:
1890 case 0x3ed:
1891 case 0x3ee:
1892 case 0x3ef:
1893 return "COM3";
1894
1895 case 0x2e8:
1896 case 0x2e9:
1897 case 0x2ea:
1898 case 0x2eb:
1899 case 0x2ec:
1900 case 0x2ed:
1901 case 0x2ee:
1902 case 0x2ef:
1903 return "COM4";
1904
1905 case 0x200:
1906 case 0x201:
1907 case 0x202:
1908 case 0x203:
1909 case 0x204:
1910 case 0x205:
1911 case 0x206:
1912 case 0x207:
1913 return "Joystick";
1914
1915 case 0x3f0:
1916 case 0x3f1:
1917 case 0x3f2:
1918 case 0x3f3:
1919 case 0x3f4:
1920 case 0x3f5:
1921 case 0x3f6:
1922 case 0x3f7:
1923 return "Floppy";
1924
1925 case 0x1f0:
1926 case 0x1f1:
1927 case 0x1f2:
1928 case 0x1f3:
1929 case 0x1f4:
1930 case 0x1f5:
1931 case 0x1f6:
1932 case 0x1f7:
1933 //case 0x3f6:
1934 //case 0x3f7:
1935 return "IDE 1st";
1936
1937 case 0x170:
1938 case 0x171:
1939 case 0x172:
1940 case 0x173:
1941 case 0x174:
1942 case 0x175:
1943 case 0x176:
1944 case 0x177:
1945 case 0x376:
1946 case 0x377:
1947 return "IDE 2nd";
1948
1949 case 0x1e0:
1950 case 0x1e1:
1951 case 0x1e2:
1952 case 0x1e3:
1953 case 0x1e4:
1954 case 0x1e5:
1955 case 0x1e6:
1956 case 0x1e7:
1957 case 0x3e6:
1958 case 0x3e7:
1959 return "IDE 3rd";
1960
1961 case 0x160:
1962 case 0x161:
1963 case 0x162:
1964 case 0x163:
1965 case 0x164:
1966 case 0x165:
1967 case 0x166:
1968 case 0x167:
1969 case 0x366:
1970 case 0x367:
1971 return "IDE 4th";
1972
1973 case 0x130: case 0x140: case 0x150:
1974 case 0x131: case 0x141: case 0x151:
1975 case 0x132: case 0x142: case 0x152:
1976 case 0x133: case 0x143: case 0x153:
1977 case 0x134: case 0x144: case 0x154:
1978 case 0x135: case 0x145: case 0x155:
1979 case 0x136: case 0x146: case 0x156:
1980 case 0x137: case 0x147: case 0x157:
1981 case 0x138: case 0x148: case 0x158:
1982 case 0x139: case 0x149: case 0x159:
1983 case 0x13a: case 0x14a: case 0x15a:
1984 case 0x13b: case 0x14b: case 0x15b:
1985 case 0x13c: case 0x14c: case 0x15c:
1986 case 0x13d: case 0x14d: case 0x15d:
1987 case 0x13e: case 0x14e: case 0x15e:
1988 case 0x13f: case 0x14f: case 0x15f:
1989 case 0x220: case 0x230:
1990 case 0x221: case 0x231:
1991 case 0x222: case 0x232:
1992 case 0x223: case 0x233:
1993 case 0x224: case 0x234:
1994 case 0x225: case 0x235:
1995 case 0x226: case 0x236:
1996 case 0x227: case 0x237:
1997 case 0x228: case 0x238:
1998 case 0x229: case 0x239:
1999 case 0x22a: case 0x23a:
2000 case 0x22b: case 0x23b:
2001 case 0x22c: case 0x23c:
2002 case 0x22d: case 0x23d:
2003 case 0x22e: case 0x23e:
2004 case 0x22f: case 0x23f:
2005 case 0x330: case 0x340: case 0x350:
2006 case 0x331: case 0x341: case 0x351:
2007 case 0x332: case 0x342: case 0x352:
2008 case 0x333: case 0x343: case 0x353:
2009 case 0x334: case 0x344: case 0x354:
2010 case 0x335: case 0x345: case 0x355:
2011 case 0x336: case 0x346: case 0x356:
2012 case 0x337: case 0x347: case 0x357:
2013 case 0x338: case 0x348: case 0x358:
2014 case 0x339: case 0x349: case 0x359:
2015 case 0x33a: case 0x34a: case 0x35a:
2016 case 0x33b: case 0x34b: case 0x35b:
2017 case 0x33c: case 0x34c: case 0x35c:
2018 case 0x33d: case 0x34d: case 0x35d:
2019 case 0x33e: case 0x34e: case 0x35e:
2020 case 0x33f: case 0x34f: case 0x35f:
2021 return "SCSI (typically)";
2022
2023 case 0x320:
2024 case 0x321:
2025 case 0x322:
2026 case 0x323:
2027 case 0x324:
2028 case 0x325:
2029 case 0x326:
2030 case 0x327:
2031 return "XT HD";
2032
2033 case 0x3b0:
2034 case 0x3b1:
2035 case 0x3b2:
2036 case 0x3b3:
2037 case 0x3b4:
2038 case 0x3b5:
2039 case 0x3b6:
2040 case 0x3b7:
2041 case 0x3b8:
2042 case 0x3b9:
2043 case 0x3ba:
2044 case 0x3bb:
2045 return "VGA";
2046
2047 case 0x3c0: case 0x3d0:
2048 case 0x3c1: case 0x3d1:
2049 case 0x3c2: case 0x3d2:
2050 case 0x3c3: case 0x3d3:
2051 case 0x3c4: case 0x3d4:
2052 case 0x3c5: case 0x3d5:
2053 case 0x3c6: case 0x3d6:
2054 case 0x3c7: case 0x3d7:
2055 case 0x3c8: case 0x3d8:
2056 case 0x3c9: case 0x3d9:
2057 case 0x3ca: case 0x3da:
2058 case 0x3cb: case 0x3db:
2059 case 0x3cc: case 0x3dc:
2060 case 0x3cd: case 0x3dd:
2061 case 0x3ce: case 0x3de:
2062 case 0x3cf: case 0x3df:
2063 return "VGA/EGA";
2064
2065 case 0x240: case 0x260: case 0x280:
2066 case 0x241: case 0x261: case 0x281:
2067 case 0x242: case 0x262: case 0x282:
2068 case 0x243: case 0x263: case 0x283:
2069 case 0x244: case 0x264: case 0x284:
2070 case 0x245: case 0x265: case 0x285:
2071 case 0x246: case 0x266: case 0x286:
2072 case 0x247: case 0x267: case 0x287:
2073 case 0x248: case 0x268: case 0x288:
2074 case 0x249: case 0x269: case 0x289:
2075 case 0x24a: case 0x26a: case 0x28a:
2076 case 0x24b: case 0x26b: case 0x28b:
2077 case 0x24c: case 0x26c: case 0x28c:
2078 case 0x24d: case 0x26d: case 0x28d:
2079 case 0x24e: case 0x26e: case 0x28e:
2080 case 0x24f: case 0x26f: case 0x28f:
2081 case 0x300:
2082 case 0x301:
2083 case 0x388:
2084 case 0x389:
2085 case 0x38a:
2086 case 0x38b:
2087 return "Sound Card (typically)";
2088
2089 default:
2090 return NULL;
2091 }
2092}
2093#endif /* VBOX_WITH_STATISTICS */
2094
Note: See TracBrowser for help on using the repository browser.

© 2023 Oracle
Contact – Privacy policy – Terms of Use