VirtualBox

source: vbox/trunk/include/VBox/err.h@ 103224

Last change on this file since 103224 was 102977, checked in by vboxsync, 9 months ago

VMM/IEM: Implemented generic fallback for misaligned x86 locking that is not compatible with the host. Using the existing split-lock solution with VINF_EM_EMULATE_SPLIT_LOCK from bugref:10052. We keep ignoring the 'lock' prefix in the recompiler for single CPU VMs (now also on amd64 hosts). bugref:10547

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 159.5 KB
Line 
1/** @file
2 * VirtualBox Status Codes.
3 */
4
5/*
6 * Copyright (C) 2006-2023 Oracle and/or its affiliates.
7 *
8 * This file is part of VirtualBox base platform packages, as
9 * available from https://www.virtualbox.org.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * as published by the Free Software Foundation, in version 3 of the
14 * License.
15 *
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, see <https://www.gnu.org/licenses>.
23 *
24 * The contents of this file may alternatively be used under the terms
25 * of the Common Development and Distribution License Version 1.0
26 * (CDDL), a copy of it is provided in the "COPYING.CDDL" file included
27 * in the VirtualBox distribution, in which case the provisions of the
28 * CDDL are applicable instead of those of the GPL.
29 *
30 * You may elect to license modified versions of this file under the
31 * terms and conditions of either the GPL or the CDDL or both.
32 *
33 * SPDX-License-Identifier: GPL-3.0-only OR CDDL-1.0
34 */
35
36#ifndef VBOX_INCLUDED_err_h
37#define VBOX_INCLUDED_err_h
38#ifndef RT_WITHOUT_PRAGMA_ONCE
39# pragma once
40#endif
41
42#include <VBox/cdefs.h>
43#include <iprt/err.h>
44
45
46/** @defgroup grp_err VBox Error Codes
47 * @{
48 */
49
50/* SED-START */
51
52/** @name Misc. Status Codes
53 * @{
54 */
55/** Failed to allocate VM memory. */
56#define VERR_NO_VM_MEMORY (-1000)
57/** RC is toasted and the VMM should be terminated at once, but no need to
58 * panic about it :-) */
59#define VERR_DONT_PANIC (-1001)
60/** Unsupported CPU. */
61#define VERR_UNSUPPORTED_CPU (-1002)
62/** Unsupported CPU mode. */
63#define VERR_UNSUPPORTED_CPU_MODE (-1003)
64/** Page not present. */
65#define VERR_PAGE_NOT_PRESENT (-1004)
66/** Invalid/Corrupted configuration file. */
67#define VERR_CFG_INVALID_FORMAT (-1005)
68/** No configuration value exists. */
69#define VERR_CFG_NO_VALUE (-1006)
70/** Selector not present. */
71#define VERR_SELECTOR_NOT_PRESENT (-1007)
72/** Not code selector. */
73#define VERR_NOT_CODE_SELECTOR (-1008)
74/** Not data selector. */
75#define VERR_NOT_DATA_SELECTOR (-1009)
76/** Out of selector bounds. */
77#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
78/** Invalid selector. Usually beyond table limits. */
79#define VERR_INVALID_SELECTOR (-1011)
80/** Invalid requested privilege level. */
81#define VERR_INVALID_RPL (-1012)
82/** PML4 entry not present. */
83#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
84/** Page directory pointer not present. */
85#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
86/** Raw mode doesn't support SMP. */
87#define VERR_RAW_MODE_INVALID_SMP (-1015)
88/** Invalid VM handle. */
89#define VERR_INVALID_VM_HANDLE (-1016)
90/** Invalid VM handle. */
91#define VERR_INVALID_VMCPU_HANDLE (-1017)
92/** Invalid Virtual CPU ID. */
93#define VERR_INVALID_CPU_ID (-1018)
94/** Too many VCPUs. */
95#define VERR_TOO_MANY_CPUS (-1019)
96/** The service was disabled on the host.
97 * Returned by pfnInit in VBoxService to indicated a non-fatal error that
98 * should results in the particular service being disabled. */
99#define VERR_SERVICE_DISABLED (-1020)
100/** The requested feature is not supported in raw-mode. */
101#define VERR_NOT_SUP_IN_RAW_MODE (-1021)
102/** Invalid CPU index. */
103#define VERR_INVALID_CPU_INDEX (-1022)
104/** This VirtualBox build does not support raw-mode. */
105#define VERR_RAW_MODE_NOT_SUPPORTED (-1023)
106/** Essential fields in the shared VM structure doesn't match the global one. */
107#define VERR_INCONSISTENT_VM_HANDLE (-1024)
108/** The VM has been restored. */
109#define VERR_VM_RESTORED (-1025)
110/** The requested feature is not supported by NEM. */
111#define VERR_NOT_SUP_BY_NEM (-1026)
112/** @} */
113
114
115/** @name Execution Monitor/Manager (EM) Status Codes
116 *
117 * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
118 * are of vital importance. The lower the number the higher importance
119 * as a scheduling instruction.
120 * @{
121 */
122/** First scheduling related status code. */
123#define VINF_EM_FIRST 1100
124/** Indicating that the VM is being terminated and that the execution
125 * shall stop. */
126#define VINF_EM_TERMINATE 1100
127/** Hypervisor code was stepped.
128 * EM will first send this to the debugger, and if the issue isn't
129 * resolved there it will enter guru meditation. */
130#define VINF_EM_DBG_HYPER_STEPPED 1101
131/** Hit a breakpoint in the hypervisor code,
132 * EM will first send this to the debugger, and if the issue isn't
133 * resolved there it will enter guru meditation. */
134#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
135/** Hit a possible assertion in the hypervisor code,
136 * EM will first send this to the debugger, and if the issue isn't
137 * resolved there it will enter guru meditation. */
138#define VINF_EM_DBG_HYPER_ASSERTION 1103
139/** Generic debug event, suspend the VM for debugging. */
140#define VINF_EM_DBG_EVENT 1104
141/** Indicating that the VM should be suspended for debugging because
142 * the developer wants to inspect the VM state. */
143#define VINF_EM_DBG_STOP 1105
144/** Indicating success single stepping and that EM should report that
145 * event to the debugger. */
146#define VINF_EM_DBG_STEPPED 1106
147/** Indicating that a breakpoint was hit and that EM should notify the debugger
148 * and in the event there is no debugger fail fatally. */
149#define VINF_EM_DBG_BREAKPOINT 1107
150/** Indicating that EM should single step an instruction.
151 * The instruction is stepped in the current execution mode (RAW/REM). */
152#define VINF_EM_DBG_STEP 1108
153/** Indicating that the VM is being turned off and that the EM should
154 * exit to the VM awaiting the destruction request. */
155#define VINF_EM_OFF 1109
156/** Indicating that the VM has been suspended and that the thread
157 * should wait for request telling it what to do next. */
158#define VINF_EM_SUSPEND 1110
159/** Indicating that the VM has been reset and that scheduling goes
160 * back to startup defaults. */
161#define VINF_EM_RESET 1111
162/** Indicating that the VM has executed a halt instruction and that
163 * the emulation thread should wait for an interrupt before resuming
164 * execution. */
165#define VINF_EM_HALT 1112
166/** Indicating that the VM has been resumed and that the thread should
167 * start executing. */
168#define VINF_EM_RESUME 1113
169/** Indicating that we've got an out-of-memory condition and that we need
170 * to take the appropriate actions to deal with this.
171 * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
172 * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
173 * vital to correctly operating the VM. Also, they can't normally occur together
174 * with an out-of-memory condition, and even if that should happen the condition
175 * will be rediscovered before executing any more code. */
176#define VINF_EM_NO_MEMORY 1114
177/** The fatal variant of VINF_EM_NO_MEMORY. */
178#define VERR_EM_NO_MEMORY (-1114)
179/** Indicating that we should reschedule to recompiled execution.
180 * Typically caused by the main execution engine not being capable of executing
181 * code in the current CPU state, or would be doing it too slowly, and we must
182 * fall back to recompiled execution.
183 * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
184#define VINF_EM_RESCHEDULE_REM 1115
185/** Indicating that we should reschedule to the main execution engine.
186 * Mainly triggered in recompiled execution mode to switch back to the main
187 * execution engine when the CPU state is compatible with it again (or we're
188 * past the expensive portion of code that is deemed faster to recompile). */
189#define VINF_EM_RESCHEDULE_EXEC_ENGINE 1116
190/* VINF_EM_RESCHEDULE_RAW was 1117 */
191/** Indicating that a rescheduling now is required. Typically caused by
192 * interrupts having changed the EIP. */
193#define VINF_EM_RESCHEDULE 1118
194/* VINF_EM_RESCHEDULE_PARAV was 1119 */
195/** Go back into wait for SIPI mode */
196#define VINF_EM_WAIT_SIPI 1120
197/** Last scheduling related status code. (inclusive) */
198#define VINF_EM_LAST 1120
199
200/** Reason for leaving RC: Guest trap which couldn't be handled in RC.
201 * The trap is generally forwarded to the REM and executed there. */
202#define VINF_EM_RAW_GUEST_TRAP 1121
203/** Reason for leaving RC: Interrupted by external interrupt.
204 * The interrupt needed to be handled by the host OS. */
205#define VINF_EM_RAW_INTERRUPT 1122
206/** Reason for leaving RC: Interrupted by external interrupt while in hypervisor
207 * code. The interrupt needed to be handled by the host OS and hypervisor
208 * execution must be resumed. VM state is not complete at this point. */
209#define VINF_EM_RAW_INTERRUPT_HYPER 1123
210/** Reason for leaving RC: A Ring switch was attempted.
211 * Normal cause of action is to execute this in REM. */
212#define VINF_EM_RAW_RING_SWITCH 1124
213/** Reason for leaving RC: A Ring switch was attempted using software interrupt.
214 * Normal cause of action is to execute this in REM. */
215#define VINF_EM_RAW_RING_SWITCH_INT 1125
216/** Reason for leaving RC: A privileged instruction was attempted executed.
217 * Normal cause of action is to execute this in REM. */
218#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126
219
220/** Reason for leaving RZ: Emulate instruction. */
221#define VINF_EM_RAW_EMULATE_INSTR 1127
222/** Reason for leaving RC: Unhandled TSS write.
223 * Recompiler gets control. */
224#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128
225/** Reason for leaving RC: Unhandled LDT write.
226 * Recompiler gets control. */
227#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129
228/** Reason for leaving RC: Unhandled IDT write.
229 * Recompiler gets control. */
230#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130
231/** Reason for leaving RC: Partly handled GDT write.
232 * Recompiler gets control. */
233#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131
234/** Reason for leaving RC: jump inside generated patch jump.
235 * Fatal error. */
236#define VERR_EM_RAW_PATCH_CONFLICT (-1133)
237/** Reason for leaving RZ: Ring-3 operation pending. */
238#define VINF_EM_RAW_TO_R3 1135
239/** Reason for leaving RZ: Timer pending. */
240#define VINF_EM_RAW_TIMER_PENDING 1136
241/** Reason for leaving RC: Interrupt pending (guest). */
242#define VINF_EM_RAW_INTERRUPT_PENDING 1137
243/** Reason for leaving RC: Encountered a stale selector. */
244#define VINF_EM_RAW_STALE_SELECTOR 1138
245/** Reason for leaving RC: The IRET resuming guest code trapped. */
246#define VINF_EM_RAW_IRET_TRAP 1139
247/** The interpreter was unable to deal with the instruction at hand. */
248#define VERR_EM_INTERPRETER (-1148)
249/** Internal EM error caused by an unknown warning or informational status code. */
250#define VERR_EM_INTERNAL_ERROR (-1149)
251/** Pending VM request packet. */
252#define VINF_EM_PENDING_REQUEST 1150
253/** Start instruction stepping (debug only). */
254#define VINF_EM_RAW_EMULATE_DBG_STEP 1151
255/** Patch TPR access instruction. */
256#define VINF_EM_HM_PATCH_TPR_INSTR 1152
257/** Unexpected guest mapping conflict detected. */
258#define VERR_EM_UNEXPECTED_MAPPING_CONFLICT (-1154)
259/** Reason for leaving RC: A triple-fault condition. Currently, causes
260 * a guru meditation. */
261#define VINF_EM_TRIPLE_FAULT 1155
262/** The specified execution engine cannot execute guest code in the current
263 * state. */
264#define VERR_EM_CANNOT_EXEC_GUEST (-1156)
265/** Reason for leaving RC: Inject a TRPM event. */
266#define VINF_EM_RAW_INJECT_TRPM_EVENT 1157
267/** Guest tried to trigger a CPU hang. The guest is probably up to no good. */
268#define VERR_EM_GUEST_CPU_HANG (-1158)
269/** Reason for leaving RZ: Pending ring-3 IN instruction. */
270#define VINF_EM_PENDING_R3_IOPORT_READ 1159
271/** Reason for leaving RZ: Pending ring-3 OUT instruction. */
272#define VINF_EM_PENDING_R3_IOPORT_WRITE 1160
273/** Trick for resuming EMHistoryExec after a VMCPU_FF_IOM is handled. */
274#define VINF_EM_RESUME_R3_HISTORY_EXEC 1161
275/** Emulate split-lock access on SMP.
276 * This is also used for dealing with locked alignment conflicts with the host
277 * in general from IEM. */
278#define VINF_EM_EMULATE_SPLIT_LOCK 1162
279/** @} */
280
281
282/** @name Debugging Facility (DBGF) DBGF Status Codes
283 * @{
284 */
285/** The function called requires the caller to be attached as a
286 * debugger to the VM. */
287#define VERR_DBGF_NOT_ATTACHED (-1200)
288/** Someone (including the caller) was already attached as
289 * debugger to the VM. */
290#define VERR_DBGF_ALREADY_ATTACHED (-1201)
291/** Tried to halt a VM or CPU that was already halted. */
292#define VWRN_DBGF_ALREADY_HALTED 1202
293/** The DBGF has no more free breakpoint slots. */
294#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
295/** The DBGF couldn't find the specified breakpoint. */
296#define VERR_DBGF_BP_NOT_FOUND (-1204)
297/** Attempted to enabled a breakpoint which was already enabled. */
298#define VINF_DBGF_BP_ALREADY_ENABLED 1205
299/** Attempted to disabled a breakpoint which was already disabled. */
300#define VINF_DBGF_BP_ALREADY_DISABLED 1206
301/** The breakpoint already exists. */
302#define VINF_DBGF_BP_ALREADY_EXIST 1207
303/** The byte string was not found. */
304#define VERR_DBGF_MEM_NOT_FOUND (-1208)
305/** The OS was not detected. */
306#define VERR_DBGF_OS_NOT_DETCTED (-1209)
307/** The OS was not detected. */
308#define VINF_DBGF_OS_NOT_DETCTED 1209
309/** The specified register was not found. */
310#define VERR_DBGF_REGISTER_NOT_FOUND (-1210)
311/** The value was truncated to fit.
312 * For queries this means that the register is wider than the queried value.
313 * For setters this means that the value is wider than the register. */
314#define VINF_DBGF_TRUNCATED_REGISTER 1211
315/** The value was zero extended to fit.
316 * For queries this means that the register is narrower than the queried value.
317 * For setters this means that the value is narrower than the register. */
318#define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212
319/** The requested type conversion was not supported. */
320#define VERR_DBGF_UNSUPPORTED_CAST (-1213)
321/** The register is read-only and cannot be modified. */
322#define VERR_DBGF_READ_ONLY_REGISTER (-1214)
323/** Internal processing error \#1 in the DBGF register code. */
324#define VERR_DBGF_REG_IPE_1 (-1215)
325/** Internal processing error \#2 in the DBGF register code. */
326#define VERR_DBGF_REG_IPE_2 (-1216)
327/** Unhandled \#DB in hypervisor code. */
328#define VERR_DBGF_HYPER_DB_XCPT (-1217)
329/** Internal processing error \#1 in the DBGF stack code. */
330#define VERR_DBGF_STACK_IPE_1 (-1218)
331/** Internal processing error \#2 in the DBGF stack code. */
332#define VERR_DBGF_STACK_IPE_2 (-1219)
333/** No trace buffer available, please change the VM config. */
334#define VERR_DBGF_NO_TRACE_BUFFER (-1220)
335/** Internal processing error \#1 in the DBGF event tracing code. */
336#define VERR_DBGF_TRACER_IPE_1 (-1221)
337/** Tried to resume a VM or CPU that is already fully running. */
338#define VWRN_DBGF_ALREADY_RUNNING (-1222)
339/** Internal processing error \#1 in the DBGF core code. */
340#define VERR_DBGF_IPE_1 (-1223)
341/** Returned by a breakpoint callback when guest execution should be suspended
342 * and the VM should be dropped into the debugger. */
343#define VINF_DBGF_BP_HALT (1224)
344/** The breakpoint owner handle is still used by one or more breakpoints. */
345#define VERR_DBGF_OWNER_BUSY (-1225)
346/** Number of tries to add an int3 breakpoint table to the lookup tables reached. */
347#define VERR_DBGF_BP_INT3_ADD_TRIES_REACHED (-1226)
348/** Internal processing error \#1 in the DBGF breakpoint manager code. */
349#define VERR_DBGF_BP_IPE_1 (-1227)
350/** Internal processing error \#2 in the DBGF breakpoint manager code. */
351#define VERR_DBGF_BP_IPE_2 (-1228)
352/** Internal processing error \#3 in the DBGF breakpoint manager code. */
353#define VERR_DBGF_BP_IPE_3 (-1229)
354/** Internal processing error \#4 in the DBGF breakpoint manager code. */
355#define VERR_DBGF_BP_IPE_4 (-1230)
356/** Internal processing error \#5 in the DBGF breakpoint manager code. */
357#define VERR_DBGF_BP_IPE_5 (-1231)
358/** Internal processing error \#6 in the DBGF breakpoint manager code. */
359#define VERR_DBGF_BP_IPE_6 (-1232)
360/** Internal processing error \#7 in the DBGF breakpoint manager code. */
361#define VERR_DBGF_BP_IPE_7 (-1233)
362/** Internal processing error \#8 in the DBGF breakpoint manager code. */
363#define VERR_DBGF_BP_IPE_8 (-1234)
364/** Internal processing error \#9 in the DBGF breakpoint manager code. */
365#define VERR_DBGF_BP_IPE_9 (-1235)
366/** Level 2 lookup failed because the L1 lookup table is corrupted. */
367#define VERR_DBGF_BP_L1_LOOKUP_FAILED (-1236)
368/** Level 2 lookup failed because the L2 lookup table is corrupted. */
369#define VERR_DBGF_BP_L2_LOOKUP_FAILED (-1237)
370/** The DBGF has no more free breakpoint owner handles. */
371#define VERR_DBGF_BP_OWNER_NO_MORE_HANDLES (-1238)
372/** Reason for leaving RZ: Defer the owner callback invocation to Ring-3. */
373#define VINF_DBGF_R3_BP_OWNER_DEFER 1239
374/** The breakpoint owner callback returned an invalid status code. */
375#define VERR_DBGF_BP_OWNER_CALLBACK_WRONG_STATUS (-1240)
376/** The operation was cancelled. */
377#define VERR_DBGF_CANCELLED (-1241)
378/** @} */
379
380
381/** @name Patch Manager (PATM) Status Codes
382 * @{
383 */
384/** Non fatal Patch Manager analysis phase warning */
385#define VWRN_CONTINUE_ANALYSIS 1400
386/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
387#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
388/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
389#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
390/** Patch installation refused (patch too complex or unsupported instructions ) */
391#define VERR_PATCHING_REFUSED (-1401)
392/** Unable to find patch */
393#define VERR_PATCH_NOT_FOUND (-1402)
394/** Patch disabled */
395#define VERR_PATCH_DISABLED (-1403)
396/** Patch enabled */
397#define VWRN_PATCH_ENABLED 1404
398/** Patch was already disabled */
399#define VERR_PATCH_ALREADY_DISABLED (-1405)
400/** Patch was already enabled */
401#define VERR_PATCH_ALREADY_ENABLED (-1406)
402/** Patch was removed. */
403#define VWRN_PATCH_REMOVED 1407
404
405/** Reason for leaving RC: \#GP with EIP pointing to patch code. */
406#define VINF_PATM_PATCH_TRAP_GP 1408
407/** First leave RC code. */
408#define VINF_PATM_LEAVE_RC_FIRST VINF_PATM_PATCH_TRAP_GP
409/** Reason for leaving RC: \#PF with EIP pointing to patch code. */
410#define VINF_PATM_PATCH_TRAP_PF 1409
411/** Reason for leaving RC: int3 with EIP pointing to patch code. */
412#define VINF_PATM_PATCH_INT3 1410
413/** Reason for leaving RC: \#PF for monitored patch page. */
414#define VINF_PATM_CHECK_PATCH_PAGE 1411
415/** Reason for leaving RC: duplicate instruction called at current eip. */
416#define VINF_PATM_DUPLICATE_FUNCTION 1412
417/** Execute one instruction with the recompiler */
418#define VINF_PATCH_EMULATE_INSTR 1413
419/** Reason for leaving RC: attempt to patch MMIO write. */
420#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
421/** Reason for leaving RC: attempt to patch MMIO read. */
422#define VINF_PATM_HC_MMIO_PATCH_READ 1415
423/** Reason for leaving RC: pending irq after iret that sets IF. */
424#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
425/** Last leave RC code. */
426#define VINF_PATM_LEAVE_RC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
427
428/** No conflicts to resolve */
429#define VERR_PATCH_NO_CONFLICT (-1425)
430/** Detected unsafe code for patching */
431#define VERR_PATM_UNSAFE_CODE (-1426)
432/** Terminate search branch */
433#define VWRN_PATCH_END_BRANCH 1427
434/** Already patched */
435#define VERR_PATM_ALREADY_PATCHED (-1428)
436/** Spinlock detection failed. */
437#define VINF_PATM_SPINLOCK_FAILED (1429)
438/** Continue execution after patch trap. */
439#define VINF_PATCH_CONTINUE (1430)
440/** The patch manager is not used because we're using HM and VT-x/AMD-V. */
441#define VERR_PATM_HM_IPE (-1431)
442/** Unexpected trap in patch code. */
443#define VERR_PATM_IPE_TRAP_IN_PATCH_CODE (-1432)
444
445/** @} */
446
447
448/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
449 * @{
450 */
451/** Trap not handled */
452#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
453/** Patch installed */
454#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
455/** Page record not found */
456#define VWRN_CSAM_PAGE_NOT_FOUND 1502
457/** Reason for leaving RC: CSAM wants perform a task in ring-3. */
458#define VINF_CSAM_PENDING_ACTION 1503
459/** The CSAM is not used because we're using HM and VT-x/AMD-V. */
460#define VERR_CSAM_HM_IPE (-1504)
461/** @} */
462
463
464/** @name Page Monitor/Manager (PGM) Status Codes
465 * @{
466 */
467/** Attempt to create a GC mapping which conflicts with an existing mapping. */
468#define VERR_PGM_MAPPING_CONFLICT (-1600)
469/** The physical handler range has no corresponding RAM range.
470 * If this is MMIO, see todo above the return. If not MMIO, then it's
471 * someone else's fault... */
472#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
473/** Attempt to register an access handler for a virtual range of which a part
474 * was already handled. */
475#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
476/** Attempt to register an access handler for a physical range of which a part
477 * was already handled. */
478#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
479/** Invalid page directory specified to PGM. */
480#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
481/** Invalid GC physical address. */
482#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
483/** Invalid GC physical range. Usually used when a specified range crosses
484 * a RAM region boundary. */
485#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
486/** Specified access handler was not found. */
487#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
488/** Attempt to register a RAM range of which parts are already
489 * covered by existing RAM ranges. */
490#define VERR_PGM_RAM_CONFLICT (-1608)
491/** Failed to add new mappings because the current mappings are fixed
492 * in guest os memory. */
493#define VERR_PGM_MAPPINGS_FIXED (-1609)
494/** Failed to fix mappings because of a conflict with the intermediate code. */
495#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
496/** Failed to fix mappings because a mapping rejected the address. */
497#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
498/** Failed to fix mappings because the proposed memory area was to small. */
499#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
500/** Reason for leaving RZ: The urge to syncing CR3. */
501#define VINF_PGM_SYNC_CR3 1613
502/** Page not marked for dirty bit tracking */
503#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
504/** Page fault caused by dirty bit tracking; corrected */
505#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
506/** Go ahead with the default Read/Write operation.
507 * This is returned by a R3 physical or virtual handler when it wants the
508 * PGMPhys[Read|Write] routine do the reading/writing. */
509#define VINF_PGM_HANDLER_DO_DEFAULT 1616
510/** The paging mode of the host is not supported yet. */
511#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
512/** The physical guest page is a reserved/MMIO page and does not have any HC
513 * address. */
514#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
515/** No page directory available for the hypervisor. */
516#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
517
518
519/** The returned shadow page is cached. */
520#define VINF_PGM_CACHED_PAGE 1622
521/** Returned by handler registration, modification and deregistration
522 * when the shadow PTs could be updated because the guest page
523 * aliased or/and mapped by multiple PTs. */
524#define VINF_PGM_GCPHYS_ALIASED 1623
525/** SyncPage modified the PDE.
526 * This is an internal status code used to communicate back to the \#PF handler
527 * that the PDE was (probably) marked not-present and it should restart the instruction. */
528#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
529/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
530#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
531/** Conflict between the core memory and the intermediate paging context, try again.
532 * There are some very special conditions applying to the intermediate paging context
533 * (used during the world switches), and some times we continuously run into these
534 * when asking the host kernel for memory during VM init. Let us know if you run into
535 * this and we'll adjust the code so it tries harder to avoid it.
536 */
537#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
538/** The shadow paging mode is not supported yet. */
539#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
540/** The dynamic mapping cache for physical memory failed. */
541#define VERR_PGM_DYNMAP_FAILED (-1629)
542/** The auto usage cache for the dynamic mapping set is full. */
543#define VERR_PGM_DYNMAP_FULL_SET (-1630)
544/** The initialization of the dynamic mapping cache failed. */
545#define VERR_PGM_DYNMAP_SETUP_ERROR (-1631)
546/** The expanding of the dynamic mapping cache failed. */
547#define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632)
548/** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */
549#define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633)
550/** Catch any access and route it thru PGM. */
551#define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634)
552/** Catch write access and route it thru PGM. */
553#define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635
554/** Catch write access and route it thru PGM. */
555#define VERR_PGM_PHYS_TLB_CATCH_WRITE (-1635)
556/** No CR3 root shadow page table. */
557#define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636)
558/** Trying to free a page with an invalid Page ID. */
559#define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637)
560/** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */
561#define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638)
562/** Trying to free a page that isn't RAM. */
563#define VERR_PGM_PHYS_NOT_RAM (-1639)
564/** Not ROM page. */
565#define VERR_PGM_PHYS_NOT_ROM (-1640)
566/** Not MMIO page. */
567#define VERR_PGM_PHYS_NOT_MMIO (-1641)
568/** Not MMIO2 page. */
569#define VERR_PGM_PHYS_NOT_MMIO2 (-1642)
570/** Already aliased to a different page. */
571#define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643)
572/** Already aliased to the same page. */
573#define VINF_PGM_HANDLER_ALREADY_ALIASED (1643)
574/** PGM pool flush pending - return to ring 3. */
575#define VINF_PGM_POOL_FLUSH_PENDING (1644)
576/** Unable to use the range for a large page. */
577#define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645)
578/** Don't mess around with ballooned pages. */
579#define VERR_PGM_PHYS_PAGE_BALLOONED (-1646)
580/** Internal processing error \#1 in page access handler code. */
581#define VERR_PGM_HANDLER_IPE_1 (-1647)
582
583
584/** pgmPhysPageMapCommon encountered PGMPAGETYPE_MMIO2_ALIAS_MMIO. */
585#define VERR_PGM_MAP_MMIO2_ALIAS_MMIO (-1651)
586/** Guest mappings are disabled. */
587#define VERR_PGM_MAPPINGS_DISABLED (-1652)
588/** No guest mappings when SMP is enabled. */
589#define VERR_PGM_MAPPINGS_SMP (-1653)
590/** Invalid saved page state. */
591#define VERR_PGM_INVALID_SAVED_PAGE_STATE (-1654)
592/** Encountered an unexpected page type in the saved state. */
593#define VERR_PGM_LOAD_UNEXPECTED_PAGE_TYPE (-1655)
594/** Encountered an unexpected page state in the saved state. */
595#define VERR_PGM_UNEXPECTED_PAGE_STATE (-1656)
596/** Couldn't find MMIO2 range from saved state. */
597#define VERR_PGM_SAVED_MMIO2_RANGE_NOT_FOUND (-1657)
598/** Couldn't find MMIO2 page from saved state. */
599#define VERR_PGM_SAVED_MMIO2_PAGE_NOT_FOUND (-1658)
600/** Couldn't find ROM range from saved state. */
601#define VERR_PGM_SAVED_ROM_RANGE_NOT_FOUND (-1659)
602/** Couldn't find ROM page from saved state. */
603#define VERR_PGM_SAVED_ROM_PAGE_NOT_FOUND (-1660)
604/** ROM page mismatch between saved state and the VM. */
605#define VERR_PGM_SAVED_ROM_PAGE_PROT (-1661)
606/** Unknown saved state record. */
607#define VERR_PGM_SAVED_REC_TYPE (-1662)
608/** Internal processing error in the PGM dynmap (r0/rc). */
609#define VERR_PGM_DYNMAP_IPE (-1663)
610/** Internal processing error in the PGM handy page allocator. */
611#define VERR_PGM_HANDY_PAGE_IPE (-1664)
612/** Failed to map the guest PML4. */
613#define VERR_PGM_PML4_MAPPING (-1665)
614/** Failed to obtain a pool page. */
615#define VERR_PGM_POOL_GET_PAGE_FAILED (-1666)
616/** A PGM function was called in a mode where it isn't supposed to be used. */
617#define VERR_PGM_NOT_USED_IN_MODE (-1667)
618/** The CR3 address specified memory we don't know about. */
619#define VERR_PGM_INVALID_CR3_ADDR (-1668)
620/** One or the PDPEs specified memory we don't know about. */
621#define VERR_PGM_INVALID_PDPE_ADDR (-1669)
622/** Internal processing error in the PGM physical handler code. */
623#define VERR_PGM_PHYS_HANDLER_IPE (-1670)
624/** Internal processing error \#1 in the PGM physial page mapping code. */
625#define VERR_PGM_PHYS_PAGE_MAP_IPE_1 (-1671)
626/** Internal processing error \#2 in the PGM physial page mapping code. */
627#define VERR_PGM_PHYS_PAGE_MAP_IPE_2 (-1672)
628/** Internal processing error \#3 in the PGM physial page mapping code. */
629#define VERR_PGM_PHYS_PAGE_MAP_IPE_3 (-1673)
630/** Internal processing error \#4 in the PGM physial page mapping code. */
631#define VERR_PGM_PHYS_PAGE_MAP_IPE_4 (-1674)
632/** Too many loops looking for a page to reuse. */
633#define VERR_PGM_POOL_TOO_MANY_LOOPS (-1675)
634/** Internal processing error related to guest mappings. */
635#define VERR_PGM_MAPPING_IPE (-1676)
636/** An attempt was made to grow an already maxed out page pool. */
637#define VERR_PGM_POOL_MAXED_OUT_ALREADY (-1677)
638/** Internal processing error in the page pool code. */
639#define VERR_PGM_POOL_IPE (-1678)
640/** The write monitor is already engaged. */
641#define VERR_PGM_WRITE_MONITOR_ENGAGED (-1679)
642/** Failed to get a guest page which is expected to be present. */
643#define VERR_PGM_PHYS_PAGE_GET_IPE (-1680)
644/** We were given a NULL pPage parameter. */
645#define VERR_PGM_PHYS_NULL_PAGE_PARAM (-1681)
646/** PCI passthru is not supported by this build. */
647#define VERR_PGM_PCI_PASSTHRU_MISCONFIG (-1682)
648/** Too many MMIO2 ranges. */
649#define VERR_PGM_TOO_MANY_MMIO2_RANGES (-1683)
650/** Internal processing error in the PGM physical page mapping code dealing
651 * with MMIO2 pages. */
652#define VERR_PGM_PHYS_PAGE_MAP_MMIO2_IPE (-1684)
653/** Internal processing error in the PGM physcal page handling code related to
654 * MMIO/MMIO2. */
655#define VERR_PGM_PHYS_MMIO_EX_IPE (-1685)
656/** Mode table internal error. */
657#define VERR_PGM_MODE_IPE (-1686)
658/** Shadow mode 'none' internal error. */
659#define VERR_PGM_SHW_NONE_IPE (-1687)
660/** One or more PAE PDPEs are invalid due to reserved bits being set. */
661#define VERR_PGM_PAE_PDPE_RSVD (-1688)
662/** Attemted illegal operation in simplified memory management mode. */
663#define VERR_PGM_NOT_SUPPORTED_FOR_NEM_MODE (-1689)
664/** @} */
665
666
667/** @name Memory Monitor (MM) Status Codes
668 * @{
669 */
670/** Attempt to register a RAM range of which parts are already
671 * covered by existing RAM ranges. */
672#define VERR_MM_RAM_CONFLICT (-1700)
673/** Hypervisor memory allocation failed. */
674#define VERR_MM_HYPER_NO_MEMORY (-1701)
675/** A bad trap type ended up in mmGCRamTrap0eHandler. */
676#define VERR_MM_BAD_TRAP_TYPE_IPE (-1702)
677/** @} */
678
679
680/** @name CPU Monitor (CPUM) Status Codes
681 * @{
682 */
683/** The caller shall raise an \#GP(0) exception. */
684#define VERR_CPUM_RAISE_GP_0 (-1750)
685/** Incompatible CPUM configuration. */
686#define VERR_CPUM_INCOMPATIBLE_CONFIG (-1751)
687/** CPUMR3DisasmInstrCPU unexpectedly failed to determine the hidden
688 * parts of the CS register. */
689#define VERR_CPUM_HIDDEN_CS_LOAD_ERROR (-1752)
690/** Couldn't find the end of CPUID sub-leaves. */
691#define VERR_CPUM_TOO_MANY_CPUID_SUBLEAVES (-1753)
692/** CPUM internal processing error \#1. */
693#define VERR_CPUM_IPE_1 (-1754)
694/** CPUM internal processing error \#2. */
695#define VERR_CPUM_IPE_2 (-1755)
696/** The specified CPU cannot be found in the CPU database. */
697#define VERR_CPUM_DB_CPU_NOT_FOUND (-1756)
698/** Invalid CPUMCPU offset in MSR range. */
699#define VERR_CPUM_MSR_BAD_CPUMCPU_OFFSET (-1757)
700/** Return to ring-3 to read the MSR there. */
701#define VINF_CPUM_R3_MSR_READ (1758)
702/** Return to ring-3 to write the MSR there. */
703#define VINF_CPUM_R3_MSR_WRITE (1759)
704/** Too many CPUID leaves. */
705#define VERR_TOO_MANY_CPUID_LEAVES (-1760)
706/** Invalid config value. */
707#define VERR_CPUM_INVALID_CONFIG_VALUE (-1761)
708/** The loaded XSAVE component mask is not compatible with the host CPU
709 * or/and VM config. */
710#define VERR_CPUM_INCOMPATIBLE_XSAVE_COMP_MASK (-1762)
711/** The loaded XSAVE component mask is not valid. */
712#define VERR_CPUM_INVALID_XSAVE_COMP_MASK (-1763)
713/** The loaded XSAVE header is not valid. */
714#define VERR_CPUM_INVALID_XSAVE_HDR (-1764)
715/** The loaded XCR0 register value is not valid. */
716#define VERR_CPUM_INVALID_XCR0 (-1765)
717/** Indicates that we modified the host CR0 (FPU related). */
718#define VINF_CPUM_HOST_CR0_MODIFIED (1766)
719/** Invalid/unsupported nested hardware virtualization configuration. */
720#define VERR_CPUM_INVALID_HWVIRT_CONFIG (-1767)
721/** Invalid nested hardware virtualization feature combination. */
722#define VERR_CPUM_INVALID_HWVIRT_FEAT_COMBO (-1768)
723/** @} */
724
725
726/** @name Save State Manager (SSM) Status Codes
727 * @{
728 */
729/** The specified data unit already exist. */
730#define VERR_SSM_UNIT_EXISTS (-1800)
731/** The specified data unit wasn't found. */
732#define VERR_SSM_UNIT_NOT_FOUND (-1801)
733/** The specified data unit wasn't owned by caller. */
734#define VERR_SSM_UNIT_NOT_OWNER (-1802)
735
736/** General saved state file integrity error. */
737#define VERR_SSM_INTEGRITY (-1810)
738/** The saved state file magic was not recognized. */
739#define VERR_SSM_INTEGRITY_MAGIC (-1811)
740/** The saved state file version is not supported. */
741#define VERR_SSM_INTEGRITY_VERSION (-1812)
742/** The saved state file size didn't match the one in the header. */
743#define VERR_SSM_INTEGRITY_SIZE (-1813)
744/** The CRC of the saved state file did not match. */
745#define VERR_SSM_INTEGRITY_CRC (-1814)
746/** The machine uuid field wasn't null. */
747#define VERR_SMM_INTEGRITY_MACHINE (-1815)
748/** Saved state header integrity error. */
749#define VERR_SSM_INTEGRITY_HEADER (-1816)
750/** Unit header integrity error. */
751#define VERR_SSM_INTEGRITY_UNIT (-1817)
752/** Invalid unit magic (internal data tag). */
753#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818)
754/** The file contained a data unit which no-one wants. */
755#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819)
756/** Incorrect version numbers in the header. */
757#define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820)
758/** Footer integrity error. */
759#define VERR_SSM_INTEGRITY_FOOTER (-1821)
760/** Record header integrity error. */
761#define VERR_SSM_INTEGRITY_REC_HDR (-1822)
762/** Termination record integrity error. */
763#define VERR_SSM_INTEGRITY_REC_TERM (-1823)
764/** Termination record CRC mismatch. */
765#define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824)
766/** Decompression integrity error. */
767#define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825)
768/** Saved state directory wintertides error. */
769#define VERR_SSM_INTEGRITY_DIR (-1826)
770/** The saved state directory magic is wrong. */
771#define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827)
772
773/** A data unit in the saved state file was defined but didn't any
774 * routine for processing it. */
775#define VERR_SSM_NO_LOAD_EXEC (-1830)
776/** A restore routine attempted to load more data then the unit contained. */
777#define VERR_SSM_LOADED_TOO_MUCH (-1831)
778/** Not in the correct state for the attempted operation. */
779#define VERR_SSM_INVALID_STATE (-1832)
780/** Not in the correct state for the attempted operation. */
781#define VERR_SSM_LOADED_TOO_LITTLE (-1833)
782
783/** Unsupported data unit version.
784 * A SSM user returns this if it doesn't know the u32Version. */
785#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840)
786/** The format of a data unit has changed.
787 * A SSM user returns this if it's not able to read the format for
788 * other reasons than u32Version. */
789#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841)
790/** The CPUID instruction returns different information when loading than when saved.
791 * Normally caused by hardware changes on the host, but could also be caused by
792 * changes in the BIOS setup. */
793#define VERR_SSM_LOAD_CPUID_MISMATCH (-1842)
794/** The RAM size differs between the saved state and the VM config. */
795#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843)
796/** The state doesn't match the VM configuration in one or another way.
797 * (There are certain PCI reconfiguration which the OS could potentially
798 * do which can cause this problem. Check this out when it happens.) */
799#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844)
800/** The virtual clock frequency differs too much.
801 * The clock source for the virtual time isn't reliable or the code have changed. */
802#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845)
803/** A timeout occurred while waiting for async IDE operations to finish. */
804#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846)
805/** One of the structure magics was wrong. */
806#define VERR_SSM_STRUCTURE_MAGIC (-1847)
807/** The data in the saved state doesn't conform to expectations. */
808#define VERR_SSM_UNEXPECTED_DATA (-1848)
809/** Trying to read a 64-bit guest physical address into a 32-bit variable. */
810#define VERR_SSM_GCPHYS_OVERFLOW (-1849)
811/** Trying to read a 64-bit guest virtual address into a 32-bit variable. */
812#define VERR_SSM_GCPTR_OVERFLOW (-1850)
813/** Vote for another pass. */
814#define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851
815/** Vote for done tell SSM not to call again until the final pass. */
816#define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852
817/** Vote for giving up. */
818#define VERR_SSM_VOTE_FOR_GIVING_UP (-1853)
819/** Don't call again until the final pass. */
820#define VINF_SSM_DONT_CALL_AGAIN 1854
821/** Giving up a live snapshot/teleportation attempt because of too many
822 * passes. */
823#define VERR_SSM_TOO_MANY_PASSES (-1855)
824/** Giving up a live snapshot/teleportation attempt because the state grew to
825 * big. */
826#define VERR_SSM_STATE_GREW_TOO_BIG (-1856)
827/** Giving up a live snapshot attempt because we're low on disk space. */
828#define VERR_SSM_LOW_ON_DISK_SPACE (-1857)
829/** The operation was cancelled. */
830#define VERR_SSM_CANCELLED (-1858)
831/** Nothing that can be cancelled. */
832#define VERR_SSM_NO_PENDING_OPERATION (-1859)
833/** The operation has already been cancelled. */
834#define VERR_SSM_ALREADY_CANCELLED (-1860)
835/** The machine was powered off while saving. */
836#define VERR_SSM_LIVE_POWERED_OFF (-1861)
837/** The live snapshot/teleportation operation was aborted because of a guru
838 * meditation. */
839#define VERR_SSM_LIVE_GURU_MEDITATION (-1862)
840/** The live snapshot/teleportation operation was aborted because of a fatal
841 * runtime error. */
842#define VERR_SSM_LIVE_FATAL_ERROR (-1863)
843/** The VM was suspended before or while saving, don't resume execution. */
844#define VINF_SSM_LIVE_SUSPENDED 1864
845/** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the
846 * extended API. */
847#define VERR_SSM_FIELD_COMPLEX (-1864)
848/** Invalid size of a SSM field with the specified transformation. */
849#define VERR_SSM_FIELD_INVALID_SIZE (-1865)
850/** The specified field is outside the structure. */
851#define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866)
852/** The field does not follow immediately the previous one. */
853#define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867)
854/** The field contains an invalid callback or transformation index. */
855#define VERR_SSM_FIELD_INVALID_CALLBACK (-1868)
856/** The field contains an invalid padding size. */
857#define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869)
858/** The field contains a value that is out of range. */
859#define VERR_SSM_FIELD_INVALID_VALUE (-1870)
860/** Generic stream error. */
861#define VERR_SSM_STREAM_ERROR (-1871)
862/** SSM did a callback for a pass we didn't expect. */
863#define VERR_SSM_UNEXPECTED_PASS (-1872)
864/** Someone is trying to skip backwards in the stream... */
865#define VERR_SSM_SKIP_BACKWARDS (-1873)
866/** Someone is trying to write a memory block which is too big to encode. */
867#define VERR_SSM_MEM_TOO_BIG (-1874)
868/** Encountered an bad (/unknown) record type. */
869#define VERR_SSM_BAD_REC_TYPE (-1875)
870/** Internal processing error \#1 in SSM code. */
871#define VERR_SSM_IPE_1 (-1876)
872/** Internal processing error \#2 in SSM code. */
873#define VERR_SSM_IPE_2 (-1877)
874/** Internal processing error \#3 in SSM code. */
875#define VERR_SSM_IPE_3 (-1878)
876/** A field contained an transformation that should only be used when loading
877 * old states. */
878#define VERR_SSM_FIELD_LOAD_ONLY_TRANSFORMATION (-1879)
879/** Out of range enum value. */
880#define VERR_SSM_ENUM_VALUE_OUT_OF_RANGE (-1880)
881/** @} */
882
883
884/** @name Virtual Machine (VM) Status Codes
885 * @{
886 */
887/** The specified at reset handler wasn't found. */
888#define VERR_VM_ATRESET_NOT_FOUND (-1900)
889/** Invalid VM request type.
890 * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
891 * all the other occurrences it means indicates corruption, broken logic, or stupid
892 * interface user. */
893#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
894/** Invalid VM request state.
895 * The state of the request packet was not the expected and accepted one(s). Either
896 * the interface user screwed up, or we've got corruption/broken logic. */
897#define VERR_VM_REQUEST_STATE (-1902)
898/** Invalid VM request packet.
899 * One or more of the VM controlled packet members didn't contain the correct
900 * values. Some thing's broken. */
901#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
902/** The status field has not been updated yet as the request is still
903 * pending completion. Someone queried the iStatus field before the request
904 * has been fully processed. */
905#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
906/** The request has been freed, don't read the status now.
907 * Someone is reading the iStatus field of a freed request packet. */
908#define VERR_VM_REQUEST_STATUS_FREED (-1905)
909/** A VM api requiring EMT was called from another thread.
910 * Use the VMR3ReqCall() apis to call it! */
911#define VERR_VM_THREAD_NOT_EMT (-1906)
912/** The VM state was invalid for the requested operation.
913 * Go check the 'VM Statechart Diagram.gif'. */
914#define VERR_VM_INVALID_VM_STATE (-1907)
915/** The support driver is not installed.
916 * On linux, open returned ENOENT. */
917#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
918/** The support driver is not accessible.
919 * On linux, open returned EPERM. */
920#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
921/** Was not able to load the support driver.
922 * On linux, open returned ENODEV. */
923#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
924/** Was not able to open the support driver.
925 * Generic open error used when none of the other ones fit. */
926#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
927/** The installed support driver doesn't match the version of the user. */
928#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
929/** Saving the VM state is temporarily not allowed. Try again later. */
930#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
931/** An EMT called an API which cannot be called on such a thread. */
932#define VERR_VM_THREAD_IS_EMT (-1914)
933/** Encountered an unexpected VM state. */
934#define VERR_VM_UNEXPECTED_VM_STATE (-1915)
935/** Unexpected unstable VM state. */
936#define VERR_VM_UNEXPECTED_UNSTABLE_STATE (-1916)
937/** Too many arguments passed to a VM request / request corruption. */
938#define VERR_VM_REQUEST_TOO_MANY_ARGS_IPE (-1917)
939/** Fatal EMT wait error. */
940#define VERR_VM_FATAL_WAIT_ERROR (-1918)
941/** The VM request was killed at VM termination. */
942#define VERR_VM_REQUEST_KILLED (-1919)
943/** @} */
944
945
946/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
947 * @{
948 */
949/** Successful completion of operation (mapped to generic iprt status code). */
950#define VINF_VRDP_SUCCESS VINF_SUCCESS
951/** VRDP transport operation timed out (mapped to generic iprt status code). */
952#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
953
954/** Unsupported ISO protocol feature */
955#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
956/** Security (en/decryption) engine error */
957#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
958/** VRDP protocol violation */
959#define VERR_VRDP_PROTOCOL_ERROR (-2002)
960/** Unsupported VRDP protocol feature */
961#define VERR_VRDP_NOT_SUPPORTED (-2003)
962/** VRDP protocol violation, client sends less data than expected */
963#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
964/** Internal error, VRDP packet is in wrong operation mode */
965#define VERR_VRDP_INVALID_MODE (-2005)
966/** Memory allocation failed */
967#define VERR_VRDP_NO_MEMORY (-2006)
968/** Client has been rejected */
969#define VERR_VRDP_ACCESS_DENIED (-2007)
970/** VRPD receives a packet that is not supported */
971#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
972/** VRDP script allowed the packet to be processed further */
973#define VINF_VRDP_PROCESS_PDU 2009
974/** VRDP script has completed its task */
975#define VINF_VRDP_OPERATION_COMPLETED 2010
976/** VRDP thread has started OK and will run */
977#define VINF_VRDP_THREAD_STARTED 2011
978/** Framebuffer is resized, terminate send bitmap procedure */
979#define VINF_VRDP_RESIZE_REQUESTED 2012
980/** Output can be enabled for the client. */
981#define VINF_VRDP_OUTPUT_ENABLE 2013
982/** @} */
983
984
985/** @name Configuration Manager (CFGM) Status Codes
986 * @{
987 */
988/** The integer value was too big for the requested representation. */
989#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
990/** Child node was not found. */
991#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
992/** Path to child node was invalid (i.e. empty). */
993#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
994/** Value not found. */
995#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
996/** No parent node specified. */
997#define VERR_CFGM_NO_PARENT (-2104)
998/** No node was specified. */
999#define VERR_CFGM_NO_NODE (-2105)
1000/** The value is not an integer. */
1001#define VERR_CFGM_NOT_INTEGER (-2106)
1002/** The value is not a zero terminated character string. */
1003#define VERR_CFGM_NOT_STRING (-2107)
1004/** The value is not a byte string. */
1005#define VERR_CFGM_NOT_BYTES (-2108)
1006/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
1007#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
1008/** The value is not a zero terminated password string. */
1009#define VERR_CFGM_NOT_PASSWORD (-2110)
1010/** The path of a new node contained slashes or was empty. */
1011#define VERR_CFGM_INVALID_NODE_PATH (-2160)
1012/** A new node couldn't be inserted because one with the same name exists. */
1013#define VERR_CFGM_NODE_EXISTS (-2161)
1014/** A new leaf couldn't be inserted because one with the same name exists. */
1015#define VERR_CFGM_LEAF_EXISTS (-2162)
1016/** An unknown config value was encountered. */
1017#define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163)
1018/** An unknown config node (key) was encountered. */
1019#define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164)
1020/** Internal processing error \#1 in CFGM. */
1021#define VERR_CFGM_IPE_1 (-2165)
1022/** @} */
1023
1024
1025/** @name Time Manager (TM) Status Codes
1026 * @{
1027 */
1028/** The loaded timer state was incorrect. */
1029#define VERR_TM_LOAD_STATE (-2200)
1030/** The timer was not in the correct state for the request operation. */
1031#define VERR_TM_INVALID_STATE (-2201)
1032/** The timer was in a unknown state. Corruption or stupid coding error. */
1033#define VERR_TM_UNKNOWN_STATE (-2202)
1034/** The timer was stuck in an unstable state until we grew impatient and returned. */
1035#define VERR_TM_UNSTABLE_STATE (-2203)
1036/** TM requires GIP. */
1037#define VERR_TM_GIP_REQUIRED (-2204)
1038/** TM does not support the GIP version. */
1039#define VERR_TM_GIP_VERSION (-2205)
1040/** The GIP update interval is too large. */
1041#define VERR_TM_GIP_UPDATE_INTERVAL_TOO_BIG (-2206)
1042/** The timer has a bad clock enum value, probably corruption. */
1043#define VERR_TM_TIMER_BAD_CLOCK (-2207)
1044/** The timer failed to reach a stable state. */
1045#define VERR_TM_TIMER_UNSTABLE_STATE (-2208)
1046/** Attempt to resume a running TSC. */
1047#define VERR_TM_TSC_ALREADY_TICKING (-2209)
1048/** Attempt to pause a paused TSC. */
1049#define VERR_TM_TSC_ALREADY_PAUSED (-2210)
1050/** Invalid value for cVirtualTicking. */
1051#define VERR_TM_VIRTUAL_TICKING_IPE (-2211)
1052/** Max timer limit reached. */
1053#define VERR_TM_TOO_MANY_TIMERS (-2212)
1054/** Invalid timer queue number. */
1055#define VERR_TM_INVALID_TIMER_QUEUE (-2213)
1056/** The timer queue is not longer allowed to grow. */
1057#define VERR_TM_TIMER_QUEUE_CANNOT_GROW (-2214)
1058/** TM internal processing error \#1. */
1059#define VERR_TM_IPE_1 (-2291)
1060/** TM internal processing error \#2. */
1061#define VERR_TM_IPE_2 (-2292)
1062/** TM internal processing error \#3. */
1063#define VERR_TM_IPE_3 (-2293)
1064/** TM internal processing error \#4. */
1065#define VERR_TM_IPE_4 (-2294)
1066/** TM internal processing error \#5. */
1067#define VERR_TM_IPE_5 (-2295)
1068/** TM internal processing error \#6. */
1069#define VERR_TM_IPE_6 (-2296)
1070/** TM internal processing error \#7. */
1071#define VERR_TM_IPE_7 (-2297)
1072/** TM internal processing error \#8. */
1073#define VERR_TM_IPE_8 (-2298)
1074/** TM internal processing error \#9. */
1075#define VERR_TM_IPE_9 (-2299)
1076/** @} */
1077
1078
1079/** @name Trap Manager / Monitor (TRPM) Status Codes
1080 * @{
1081 */
1082/** No active trap. Cannot query or reset a non-existing trap. */
1083#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
1084/** Active trap. Cannot assert a new trap when one is already active. */
1085#define VERR_TRPM_ACTIVE_TRAP (-2401)
1086/** Reason for leaving RC: Guest tried to write to our IDT - fatal.
1087 * The VM will be terminated assuming the worst, i.e. that the
1088 * guest has read the idtr register. */
1089#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
1090/** Reason for leaving RC: Fatal trap in hypervisor. */
1091#define VERR_TRPM_DONT_PANIC (-2403)
1092/** Reason for leaving RC: Double Fault. */
1093#define VERR_TRPM_PANIC (-2404)
1094/** Bad TRPM_TRAP_IN_OP. */
1095#define VERR_TRPM_BAD_TRAP_IN_OP (-2405)
1096/** Internal processing error \#1 in TRPM. */
1097#define VERR_TRPM_IPE_1 (-2406)
1098/** Internal processing error \#2 in TRPM. */
1099#define VERR_TRPM_IPE_2 (-2407)
1100/** Internal processing error \#3 in TRPM. */
1101#define VERR_TRPM_IPE_3 (-2408)
1102/** Got into a part of TRPM that is not used when HM (VT-x/AMD-V) is enabled. */
1103#define VERR_TRPM_HM_IPE (-2409)
1104/** @} */
1105
1106
1107/** @name Selector Manager / Monitor (SELM) Status Code
1108 * @{
1109 */
1110/** Reason for leaving RC: Guest tried to write to our GDT - fatal.
1111 * The VM will be terminated assuming the worst, i.e. that the
1112 * guest has read the gdtr register. */
1113#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
1114/** Reason for leaving RC: Guest tried to write to our LDT - fatal.
1115 * The VM will be terminated assuming the worst, i.e. that the
1116 * guest has read the ldtr register. */
1117#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
1118/** Reason for leaving RC: Guest tried to write to our TSS - fatal.
1119 * The VM will be terminated assuming the worst, i.e. that the
1120 * guest has read the ltr register. */
1121#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
1122/** Reason for leaving RC: Sync the GDT table to solve a conflict. */
1123#define VINF_SELM_SYNC_GDT 2503
1124/** No valid TSS present. */
1125#define VERR_SELM_NO_TSS (-2504)
1126/** Invalid guest LDT selector. */
1127#define VERR_SELM_INVALID_LDT (-2505)
1128/** The guest LDT selector is out of bounds. */
1129#define VERR_SELM_LDT_OUT_OF_BOUNDS (-2506)
1130/** Unknown error while reading the guest GDT during shadow table updating. */
1131#define VERR_SELM_GDT_READ_ERROR (-2507)
1132/** The guest GDT so full that we cannot find free space for our own
1133 * selectors. */
1134#define VERR_SELM_GDT_TOO_FULL (-2508)
1135/** Got into a part of SELM that is not used when HM (VT-x/AMD-V) is enabled. */
1136#define VERR_SELM_HM_IPE (-2509)
1137/** @} */
1138
1139
1140/** @name I/O Manager / Monitor (IOM) Status Code
1141 * @{
1142 */
1143/** The specified I/O port range was invalid.
1144 * It was either empty or it was out of bounds. */
1145#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
1146/** The specified R0 or RC I/O port range didn't have a corresponding R3 range.
1147 * IOMR3IOPortRegisterR3() must be called first. */
1148#define VERR_IOM_NO_R3_IOPORT_RANGE (-2601)
1149/** The specified I/O port range intruded on an existing range. There is
1150 * a I/O port conflict between two device, or a device tried to register
1151 * the same range twice. */
1152#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
1153/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
1154#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
1155/** The specified I/O port range was owned by some other device(s). Both registration
1156 * and deregistration, but in the first case only RC and R0 ranges. */
1157#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
1158
1159/** The specified MMIO range was invalid.
1160 * It was either empty or it was out of bounds. */
1161#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
1162/** The specified R0 or RC MMIO range didn't have a corresponding R3 range.
1163 * IOMR3MMIORegisterR3() must be called first. */
1164#define VERR_IOM_NO_R3_MMIO_RANGE (-2606)
1165/** The specified MMIO range was owned by some other device(s). Both registration
1166 * and deregistration, but in the first case only RC and R0 ranges. */
1167#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
1168/** The specified MMIO range intruded on an existing range. There is
1169 * a MMIO conflict between two device, or a device tried to register
1170 * the same range twice. */
1171#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
1172/** The MMIO range specified for removal was not found. */
1173#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
1174/** The MMIO range specified for removal was invalid. The range didn't match
1175 * quite match a set of existing ranges. It's not possible to remove parts of
1176 * a MMIO range, only one or more full ranges. */
1177#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
1178/** An invalid I/O port size was specified for a read or write operation. */
1179#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
1180/** The MMIO handler was called for a bogus address! Internal error! */
1181#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
1182/** The MMIO handler experienced a problem with the disassembler. */
1183#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
1184/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
1185#define VERR_IOM_IOPORT_UNUSED (-2614)
1186/** Unused MMIO register read, fill with 00. */
1187#define VINF_IOM_MMIO_UNUSED_00 2615
1188/** Unused MMIO register read, fill with FF. */
1189#define VINF_IOM_MMIO_UNUSED_FF 2616
1190
1191/** Reason for leaving RZ: I/O port read. */
1192#define VINF_IOM_R3_IOPORT_READ 2620
1193/** Reason for leaving RZ: I/O port write. */
1194#define VINF_IOM_R3_IOPORT_WRITE 2621
1195/** Reason for leaving RZ: Pending I/O port write. Since there is also
1196 * VMCPU_FF_IOM for this condition, it's ok to drop this status code for
1197 * some other VINF_EM_XXX statuses. */
1198#define VINF_IOM_R3_IOPORT_COMMIT_WRITE 2622
1199/** Reason for leaving RZ: MMIO read. */
1200#define VINF_IOM_R3_MMIO_READ 2623
1201/** Reason for leaving RZ: MMIO write. */
1202#define VINF_IOM_R3_MMIO_WRITE 2624
1203/** Reason for leaving RZ: MMIO read/write. */
1204#define VINF_IOM_R3_MMIO_READ_WRITE 2625
1205/** Reason for leaving RZ: Pending MMIO write. Since there is also
1206 * VMCPU_FF_IOM for this condition, it's ok to drop this status code for
1207 * some other VINF_EM_XXX statuses. */
1208#define VINF_IOM_R3_MMIO_COMMIT_WRITE 2626
1209
1210/** IOMGCIOPortHandler was given an unexpected opcode. */
1211#define VERR_IOM_IOPORT_UNKNOWN_OPCODE (-2630)
1212/** Internal processing error \#1 in the I/O port code. */
1213#define VERR_IOM_IOPORT_IPE_1 (-2631)
1214/** Internal processing error \#2 in the I/O port code. */
1215#define VERR_IOM_IOPORT_IPE_2 (-2632)
1216/** Internal processing error \#3 in the I/O port code. */
1217#define VERR_IOM_IOPORT_IPE_3 (-2633)
1218/** Internal processing error \#1 in the MMIO code. */
1219#define VERR_IOM_MMIO_IPE_1 (-2634)
1220/** Internal processing error \#2 in the MMIO code. */
1221#define VERR_IOM_MMIO_IPE_2 (-2635)
1222/** Internal processing error \#3 in the MMIO code. */
1223#define VERR_IOM_MMIO_IPE_3 (-2636)
1224/** Got into a part of IOM that is not used when HM (VT-x/AMD-V) is enabled. */
1225#define VERR_IOM_HM_IPE (-2637)
1226/** Internal processing error while merging status codes. */
1227#define VERR_IOM_FF_STATUS_IPE (-2638)
1228
1229/** Too many I/O port registrations. */
1230#define VERR_IOM_TOO_MANY_IOPORT_REGISTRATIONS (-2650)
1231/** Invalid I/O port handle. */
1232#define VERR_IOM_INVALID_IOPORT_HANDLE (-2651)
1233/** I/O ports are already mapped. */
1234#define VERR_IOM_IOPORTS_ALREADY_MAPPED (-2652)
1235/** I/O ports are not mapped. */
1236#define VERR_IOM_IOPORTS_NOT_MAPPED (-2653)
1237
1238/** Too many MMIO registrations. */
1239#define VERR_IOM_TOO_MANY_MMIO_REGISTRATIONS (-2660)
1240/** Invalid MMIO handle. */
1241#define VERR_IOM_INVALID_MMIO_HANDLE (-2661)
1242/** MMIO region is already mapped. */
1243#define VERR_IOM_MMIO_REGION_ALREADY_MAPPED (-2662)
1244/** MMIO region is not mapped. */
1245#define VERR_IOM_MMIO_REGION_NOT_MAPPED (-2663)
1246/** @} */
1247
1248
1249/** @name Virtual Machine Monitor (VMM) Status Codes
1250 * @{
1251 */
1252/** Reason for leaving R0: Hit a ring-0 assertion on EMT. */
1253#define VERR_VMM_RING0_ASSERTION (-2701)
1254/** The hyper CR3 differs between PGM and CPUM. */
1255#define VERR_VMM_HYPER_CR3_MISMATCH (-2702)
1256/** Reason for leaving RZ: Illegal call to ring-3. */
1257#define VERR_VMM_RING3_CALL_DISABLED (-2703)
1258/** The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib.
1259 * If you just upgraded VirtualBox, please terminate all VMs and make sure
1260 * that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again.
1261 * If this error persists, try re-installing VirtualBox. */
1262#define VERR_VMM_R0_VERSION_MISMATCH (-2704)
1263/** The VMMRC.rc module version does not match VBoxVMM.dll/so/dylib.
1264 * Re-install if you are a user. Developers should make sure the build is
1265 * complete or try with a clean build. */
1266#define VERR_VMM_RC_VERSION_MISMATCH (-2705)
1267/** VMM long jump error. */
1268#define VERR_VMM_LONG_JMP_ERROR (-2709)
1269/** Reason for leaving RC: Caller the tracer in ring-0. */
1270#define VINF_VMM_CALL_TRACER (2712)
1271/** Internal processing error \#1 in the switcher code. */
1272#define VERR_VMM_SWITCHER_IPE_1 (-2713)
1273/** Reason for leaving RZ: Unknown call to ring-3. */
1274#define VINF_VMM_UNKNOWN_RING3_CALL (2714)
1275/** Attempted to use stub switcher. */
1276#define VERR_VMM_SWITCHER_STUB (-2715)
1277/** HM returned in the wrong state. */
1278#define VERR_VMM_WRONG_HM_VMCPU_STATE (-2716)
1279/** SMAP enabled, but the AC flag was found to be clear - check the kernel
1280 * log for details. */
1281#define VERR_VMM_SMAP_BUT_AC_CLEAR (-2717)
1282/** NEM returned in the wrong state. */
1283#define VERR_VMM_WRONG_NEM_VMCPU_STATE (-2718)
1284/** Got back from vmmR0CallRing3SetJmp with the context hook still enabled. */
1285#define VERR_VMM_CONTEXT_HOOK_STILL_ENABLED (-2719)
1286/** Cannot block in ring-0. */
1287#define VERR_VMM_CANNOT_BLOCK (-2720)
1288/** @} */
1289
1290
1291/** @name Pluggable Device and Driver Manager (PDM) Status Codes
1292 * @{
1293 */
1294/** An invalid LUN specification was given. */
1295#define VERR_PDM_NO_SUCH_LUN (-2800)
1296/** A device encountered an unknown configuration value.
1297 * This means that the device is potentially misconfigured and the device
1298 * construction or unit attachment failed because of this. */
1299#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
1300/** The above driver doesn't export a interface required by a driver being
1301 * attached to it. Typical misconfiguration problem. */
1302#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
1303/** The below driver doesn't export a interface required by the drive
1304 * having attached it. Typical misconfiguration problem. */
1305#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
1306/** A device didn't find a required interface with an attached driver.
1307 * Typical misconfiguration problem. */
1308#define VERR_PDM_MISSING_INTERFACE (-2804)
1309/** A driver encountered an unknown configuration value.
1310 * This means that the driver is potentially misconfigured and the driver
1311 * construction failed because of this. */
1312#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
1313/** The PCI bus assigned to a device didn't have room for it.
1314 * Either too many devices are configured on the same PCI bus, or there are
1315 * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
1316#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
1317/** A queue is out of free items, the queueing operation failed. */
1318#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
1319/** Not possible to attach further drivers to the driver.
1320 * A driver which doesn't support attachments (below of course) will
1321 * return this status code if it found that further drivers were configured
1322 * to be attached to it. */
1323#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
1324/** Not possible to attach drivers to the device.
1325 * A device which doesn't support attachments (below of course) will
1326 * return this status code if it found that drivers were configured
1327 * to be attached to it. */
1328#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
1329/** No attached driver.
1330 * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
1331 * this error when no driver was configured to be attached. */
1332#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
1333/** The media geometry hasn't been set yet, so it cannot be obtained.
1334 * The caller should then calculate the geometry from the media size. */
1335#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
1336/** The media translation hasn't been set yet, so it cannot be obtained.
1337 * The caller should then guess the translation. */
1338#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
1339/** The media is not mounted, operation requires a mounted media. */
1340#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
1341/** Mount failed because a media was already mounted. Unmount the media
1342 * and retry the mount. */
1343#define VERR_PDM_MEDIA_MOUNTED (-2814)
1344/** The media is locked and cannot be unmounted. */
1345#define VERR_PDM_MEDIA_LOCKED (-2815)
1346/** No 'Type' attribute in the DrvBlock configuration.
1347 * Misconfiguration. */
1348#define VERR_PDM_BLOCK_NO_TYPE (-2816)
1349/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
1350 * Misconfiguration. */
1351#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
1352/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
1353 * Misconfiguration. */
1354#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
1355/** The block driver type wasn't supported.
1356 * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
1357#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
1358/** A attach or prepare mount call failed because the driver already
1359 * had a driver attached. */
1360#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
1361/** An attempt on detaching a driver without anyone actually being attached, or
1362 * performing any other operation on an attached driver. */
1363#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
1364/** The attached driver configuration is missing the 'Driver' attribute. */
1365#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
1366/** The configured driver wasn't found.
1367 * Either the necessary driver modules wasn't loaded, the name was
1368 * misspelled, or it was a misconfiguration. */
1369#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
1370/** The Ring-3 module was already loaded. */
1371#define VINF_PDM_ALREADY_LOADED (2824)
1372/** The name of the module clashed with an existing module. */
1373#define VERR_PDM_MODULE_NAME_CLASH (-2825)
1374/** Couldn't find any export for registration of drivers/devices. */
1375#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
1376/** A module name is too long. */
1377#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
1378/** Driver name clash. Another driver with the same name as the
1379 * one being registered exists. */
1380#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
1381/** The version of the driver registration structure is unknown
1382 * to this VBox version. Either mixing incompatible versions or
1383 * the structure isn't correctly initialized. */
1384#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
1385/** Invalid entry in the driver registration structure. */
1386#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
1387/** Invalid host bit mask. */
1388#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
1389/** Not possible to detach a driver because the above driver/device
1390 * doesn't support it. The above entity doesn't implement the pfnDetach call. */
1391#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
1392/** No PCI Bus is available to register the device with. This is usually a
1393 * misconfiguration or in rare cases a buggy pci device. */
1394#define VERR_PDM_NO_PCI_BUS (-2833)
1395/** The device is not a registered PCI device and thus cannot
1396 * perform any PCI operations. The device forgot to register it self. */
1397#define VERR_PDM_NOT_PCI_DEVICE (-2834)
1398
1399/** The version of the device registration structure is unknown
1400 * to this VBox version. Either mixing incompatible versions or
1401 * the structure isn't correctly initialized. */
1402#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
1403/** Invalid entry in the device registration structure. */
1404#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
1405/** Invalid host bit mask. */
1406#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
1407/** The guest bit mask didn't match the guest being loaded. */
1408#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
1409/** Device name clash. Another device with the same name as the
1410 * one being registered exists. */
1411#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
1412/** The device wasn't found. There was no registered device
1413 * by that name. */
1414#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
1415/** The device instance was not found. */
1416#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
1417/** The device instance have no base interface. */
1418#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
1419/** The device instance have no such logical unit. */
1420#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
1421/** The driver instance could not be found. */
1422#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
1423/** Logical Unit was not found. */
1424#define VERR_PDM_LUN_NOT_FOUND (-2845)
1425/** The Logical Unit was found, but it had no driver attached to it. */
1426#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
1427/** The Logical Unit was found, but it had no driver attached to it. */
1428#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
1429/** No PIC device instance is registered with the current VM and thus
1430 * the PIC operation cannot be performed. */
1431#define VERR_PDM_NO_PIC_INSTANCE (-2847)
1432/** No APIC device instance is registered with the current VM and thus
1433 * the APIC operation cannot be performed. */
1434#define VERR_PDM_NO_APIC_INSTANCE (-2848)
1435/** No DMAC device instance is registered with the current VM and thus
1436 * the DMA operation cannot be performed. */
1437#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
1438/** No RTC device instance is registered with the current VM and thus
1439 * the RTC or CMOS operation cannot be performed. */
1440#define VERR_PDM_NO_RTC_INSTANCE (-2850)
1441/** Unable to open the host interface due to a sharing violation . */
1442#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
1443/** Unable to open the host interface. */
1444#define VERR_PDM_HIF_OPEN_FAILED (-2852)
1445/** The device doesn't support runtime driver attaching.
1446 * The PDMDEVREG::pfnAttach callback function is NULL. */
1447#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
1448/** The driver doesn't support runtime driver attaching.
1449 * The PDMDRVREG::pfnAttach callback function is NULL. */
1450#define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854)
1451/** Invalid host interface version. */
1452#define VERR_PDM_HIF_INVALID_VERSION (-2855)
1453
1454/** The version of the USB device registration structure is unknown
1455 * to this VBox version. Either mixing incompatible versions or
1456 * the structure isn't correctly initialized. */
1457#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
1458/** Invalid entry in the device registration structure. */
1459#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
1460/** Driver name clash. Another driver with the same name as the
1461 * one being registered exists. */
1462#define VERR_PDM_USB_NAME_CLASH (-2858)
1463/** The USB hub is already registered. */
1464#define VERR_PDM_USB_HUB_EXISTS (-2859)
1465/** Couldn't find any USB hubs to attach the device to. */
1466#define VERR_PDM_NO_USB_HUBS (-2860)
1467/** Couldn't find any free USB ports to attach the device to. */
1468#define VERR_PDM_NO_USB_PORTS (-2861)
1469/** Couldn't find the USB Proxy device. Using OSE? */
1470#define VERR_PDM_NO_USBPROXY (-2862)
1471/** The async completion template is still used. */
1472#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
1473/** The async completion task is already suspended. */
1474#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
1475/** The async completion task is not suspended. */
1476#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
1477/** The driver properties were invalid, and as a consequence construction
1478 * failed. Caused my unusable media or similar problems. */
1479#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
1480/** Too many instances of a device. */
1481#define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867)
1482/** Too many instances of a driver. */
1483#define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868)
1484/** Too many instances of a usb device. */
1485#define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869)
1486/** The device instance structure version has changed.
1487 *
1488 * If you have upgraded VirtualBox recently, please make sure you have
1489 * terminated all VMs and upgraded any extension packs. If this error
1490 * persists, try re-installing VirtualBox. */
1491#define VERR_PDM_DEVINS_VERSION_MISMATCH (-2870)
1492/** The device helper structure version has changed.
1493 *
1494 * If you have upgraded VirtualBox recently, please make sure you have
1495 * terminated all VMs and upgraded any extension packs. If this error
1496 * persists, try re-installing VirtualBox. */
1497#define VERR_PDM_DEVHLP_VERSION_MISMATCH (-2871)
1498/** The USB device instance structure version has changed.
1499 *
1500 * If you have upgraded VirtualBox recently, please make sure you have
1501 * terminated all VMs and upgraded any extension packs. If this error
1502 * persists, try re-installing VirtualBox. */
1503#define VERR_PDM_USBINS_VERSION_MISMATCH (-2872)
1504/** The USB device helper structure version has changed.
1505 *
1506 * If you have upgraded VirtualBox recently, please make sure you have
1507 * terminated all VMs and upgraded any extension packs. If this error
1508 * persists, try re-installing VirtualBox. */
1509#define VERR_PDM_USBHLPR3_VERSION_MISMATCH (-2873)
1510/** The driver instance structure version has changed.
1511 *
1512 * If you have upgraded VirtualBox recently, please make sure you have
1513 * terminated all VMs and upgraded any extension packs. If this error
1514 * persists, try re-installing VirtualBox. */
1515#define VERR_PDM_DRVINS_VERSION_MISMATCH (-2874)
1516/** The driver helper structure version has changed.
1517 *
1518 * If you have upgraded VirtualBox recently, please make sure you have
1519 * terminated all VMs and upgraded any extension packs. If this error
1520 * persists, try re-installing VirtualBox. */
1521#define VERR_PDM_DRVHLPR3_VERSION_MISMATCH (-2875)
1522/** Generic device structure version mismatch.
1523 *
1524 * If you have upgraded VirtualBox recently, please make sure you have
1525 * terminated all VMs and upgraded any extension packs. If this error
1526 * persists, try re-installing VirtualBox. */
1527#define VERR_PDM_DEVICE_VERSION_MISMATCH (-2876)
1528/** Generic USB device structure version mismatch.
1529 *
1530 * If you have upgraded VirtualBox recently, please make sure you have
1531 * terminated all VMs and upgraded any extension packs. If this error
1532 * persists, try re-installing VirtualBox. */
1533#define VERR_PDM_USBDEV_VERSION_MISMATCH (-2877)
1534/** Generic driver structure version mismatch.
1535 *
1536 * If you have upgraded VirtualBox recently, please make sure you have
1537 * terminated all VMs and upgraded any extension packs. If this error
1538 * persists, try re-installing VirtualBox. */
1539#define VERR_PDM_DRIVER_VERSION_MISMATCH (-2878)
1540/** PDMVMMDevHeapR3ToGCPhys failure. */
1541#define VERR_PDM_DEV_HEAP_R3_TO_GCPHYS (-2879)
1542/** A legacy device isn't implementing the HPET notification interface. */
1543#define VERR_PDM_HPET_LEGACY_NOTIFY_MISSING (-2880)
1544/** Internal processing error in the critical section code. */
1545#define VERR_PDM_CRITSECT_IPE (-2881)
1546/** The critical section being deleted was not found. */
1547#define VERR_PDM_CRITSECT_NOT_FOUND (-2882)
1548/** A PDMThread API was called by the wrong thread. */
1549#define VERR_PDM_THREAD_INVALID_CALLER (-2883)
1550/** Internal processing error \#1 in the PDM Thread code. */
1551#define VERR_PDM_THREAD_IPE_1 (-2884)
1552/** Internal processing error \#2 in the PDM Thread code. */
1553#define VERR_PDM_THREAD_IPE_2 (-2885)
1554/** Only one PCI function is supported per PDM device. */
1555#define VERR_PDM_ONE_PCI_FUNCTION_PER_DEVICE (-2886)
1556/** Bad PCI configuration. */
1557#define VERR_PDM_BAD_PCI_CONFIG (-2887)
1558/** Internal processing error # in the PDM device code. */
1559#define VERR_PDM_DEV_IPE_1 (-2888)
1560/** Misconfigured driver chain transformation. */
1561#define VERR_PDM_MISCONFIGURED_DRV_TRANSFORMATION (-2889)
1562/** The driver is already removed, not more transformations possible (at
1563 * present). */
1564#define VERR_PDM_CANNOT_TRANSFORM_REMOVED_DRIVER (-2890)
1565/** The PCI device isn't configured as a busmaster, physical memory access
1566 * rejected. */
1567#define VERR_PDM_NOT_PCI_BUS_MASTER (-2891)
1568/** Got into a part of PDM that is not used when HM (VT-x/AMD-V) is enabled. */
1569#define VERR_PDM_HM_IPE (-2892)
1570/** The I/O request was canceled. */
1571#define VERR_PDM_MEDIAEX_IOREQ_CANCELED (-2893)
1572/** There is not enough room to store the data. */
1573#define VERR_PDM_MEDIAEX_IOBUF_OVERFLOW (-2894)
1574/** There is not enough data to satisfy the request. */
1575#define VERR_PDM_MEDIAEX_IOBUF_UNDERRUN (-2895)
1576/** The I/O request ID is already existing. */
1577#define VERR_PDM_MEDIAEX_IOREQID_CONFLICT (-2896)
1578/** The I/O request ID was not found. */
1579#define VERR_PDM_MEDIAEX_IOREQID_NOT_FOUND (-2897)
1580/** The I/O request is in progress. */
1581#define VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS 2898
1582/** The I/O request is in an invalid state for this operation. */
1583#define VERR_PDM_MEDIAEX_IOREQ_INVALID_STATE (-2899)
1584
1585/** Returned by PCI config space callbacks to indicate taking default action. */
1586#define VINF_PDM_PCI_DO_DEFAULT (7200)
1587/** Failed to abort entering a critical section in ring-0. */
1588#define VERR_PDM_CRITSECT_ABORT_FAILED (-7201)
1589/** Too many readers on read/write critical section. */
1590#define VERR_PDM_CRITSECTRW_TOO_MANY_READERS (-7202)
1591/** Too many writes on read/write critical section. */
1592#define VERR_PDM_CRITSECTRW_TOO_MANY_WRITERS (-7203)
1593/** Too many write or write/read recursions on read/write critical section. */
1594#define VERR_PDM_CRITSECTRW_TOO_MANY_RECURSIONS (-7204)
1595/** Internal error in read-write critical section. */
1596#define VERR_PDM_CRITSECTRW_IPE (-7205)
1597/** Misaligned read/write critical section. */
1598#define VERR_PDM_CRITSECTRW_MISALIGNED (-7206)
1599/** @} */
1600
1601
1602/** @name Host-Guest Communication Manager (HGCM) Status Codes
1603 * @{
1604 */
1605/** Requested service does not exist. */
1606#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
1607/** Service rejected client connection */
1608#define VINF_HGCM_CLIENT_REJECTED 2901
1609/** Command address is invalid. */
1610#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
1611/** Service will execute the command in background. */
1612#define VINF_HGCM_ASYNC_EXECUTE 2903
1613/** HGCM could not perform requested operation because of an internal error. */
1614#define VERR_HGCM_INTERNAL (-2904)
1615/** Invalid HGCM client id. */
1616#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
1617/** The HGCM is saving state. */
1618#define VINF_HGCM_SAVE_STATE (2906)
1619/** Requested service already exists. */
1620#define VERR_HGCM_SERVICE_EXISTS (-2907)
1621/** Too many clients for the service. */
1622#define VERR_HGCM_TOO_MANY_CLIENTS (-2908)
1623/** Too many calls to the service from a client. */
1624#define VERR_HGCM_TOO_MANY_CLIENT_CALLS (-2909)
1625/** @} */
1626
1627
1628/** @name Network Address Translation Driver (DrvNAT) Status Codes
1629 * @{
1630 */
1631/** Failed to convert the specified Guest IP to a binary IP address.
1632 * Malformed input. */
1633#define VERR_NAT_REDIR_GUEST_IP (-3001)
1634/** Failed while setting up a redirector rule.
1635 * There probably is a conflict between the rule and some existing
1636 * service on the computer. */
1637#define VERR_NAT_REDIR_SETUP (-3002)
1638/** @} */
1639
1640
1641/** @name HostIF Driver (DrvTUN) Status Codes
1642 * @{
1643 */
1644/** The Host Interface Networking init program failed. */
1645#define VERR_HOSTIF_INIT_FAILED (-3100)
1646/** The Host Interface Networking device name is too long. */
1647#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
1648/** The Host Interface Networking name config IOCTL call failed. */
1649#define VERR_HOSTIF_IOCTL (-3102)
1650/** Failed to make the Host Interface Networking handle non-blocking. */
1651#define VERR_HOSTIF_BLOCKING (-3103)
1652/** If a Host Interface Networking filehandle was specified it's not allowed to
1653 * have any init or term programs. */
1654#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
1655/** The Host Interface Networking terminate program failed. */
1656#define VERR_HOSTIF_TERM_FAILED (-3105)
1657/** @} */
1658
1659
1660/** @name VBox HDD Container (VD) Status Codes
1661 * @{
1662 */
1663/** Invalid image type. */
1664#define VERR_VD_INVALID_TYPE (-3200)
1665/** Operation can't be done in current HDD container state. */
1666#define VERR_VD_INVALID_STATE (-3201)
1667/** Configuration value not found. */
1668#define VERR_VD_VALUE_NOT_FOUND (-3202)
1669/** Virtual HDD is not opened. */
1670#define VERR_VD_NOT_OPENED (-3203)
1671/** Requested image is not opened. */
1672#define VERR_VD_IMAGE_NOT_FOUND (-3204)
1673/** Image is read-only. */
1674#define VERR_VD_IMAGE_READ_ONLY (-3205)
1675/** Geometry hasn't been set. */
1676#define VERR_VD_GEOMETRY_NOT_SET (-3206)
1677/** No data for this block in image. */
1678#define VERR_VD_BLOCK_FREE (-3207)
1679/** Differencing and parent images can't be used together due to UUID. */
1680#define VERR_VD_UUID_MISMATCH (-3208)
1681/** Asynchronous I/O request finished. */
1682#define VINF_VD_ASYNC_IO_FINISHED 3209
1683/** Asynchronous I/O is not finished yet. */
1684#define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210)
1685/** The image is too small or too large for this format. */
1686#define VERR_VD_INVALID_SIZE (-3211)
1687/** Configuration value is unknown. This indicates misconfiguration. */
1688#define VERR_VD_UNKNOWN_CFG_VALUES (-3212)
1689/** Interface is unknown. This indicates misconfiguration. */
1690#define VERR_VD_UNKNOWN_INTERFACE (-3213)
1691/** The DEK for disk encryption is missing. */
1692#define VERR_VD_DEK_MISSING (-3214)
1693/** The provided password to decrypt the DEK was incorrect. */
1694#define VERR_VD_PASSWORD_INCORRECT (-3215)
1695/** Generic: Invalid image file header. Use this for plugins. */
1696#define VERR_VD_GEN_INVALID_HEADER (-3220)
1697/** VDI: Invalid image file header. */
1698#define VERR_VD_VDI_INVALID_HEADER (-3230)
1699/** VDI: Invalid image file header: invalid signature. */
1700#define VERR_VD_VDI_INVALID_SIGNATURE (-3231)
1701/** VDI: Invalid image file header: invalid version. */
1702#define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232)
1703/** Comment string is too long. */
1704#define VERR_VD_VDI_COMMENT_TOO_LONG (-3233)
1705/** VMDK: Invalid image file header. */
1706#define VERR_VD_VMDK_INVALID_HEADER (-3240)
1707/** VMDK: Invalid image file header: invalid version. */
1708#define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241)
1709/** VMDK: Image property not found. */
1710#define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242)
1711/** VMDK: Operation can't be done in current image state. */
1712#define VERR_VD_VMDK_INVALID_STATE (-3243)
1713/** VMDK: Format is invalid/inconsistent. */
1714#define VERR_VD_VMDK_INVALID_FORMAT (-3244)
1715/** VMDK: Invalid write position. */
1716#define VERR_VD_VMDK_INVALID_WRITE (-3245)
1717/** iSCSI: Invalid header, i.e. dummy for validity check. */
1718#define VERR_VD_ISCSI_INVALID_HEADER (-3250)
1719/** iSCSI: Operation can't be done in current image state. */
1720#define VERR_VD_ISCSI_INVALID_STATE (-3251)
1721/** iSCSI: Invalid device type (not a disk). */
1722#define VERR_VD_ISCSI_INVALID_TYPE (-3252)
1723/** iSCSI: Initiator secret not decrypted */
1724#define VERR_VD_ISCSI_SECRET_ENCRYPTED (-3253)
1725/** VHD: Invalid image file header. */
1726#define VERR_VD_VHD_INVALID_HEADER (-3260)
1727/** Parallels HDD: Invalid image file header. */
1728#define VERR_VD_PARALLELS_INVALID_HEADER (-3265)
1729/** DMG: Invalid image file header. */
1730#define VERR_VD_DMG_INVALID_HEADER (-3267)
1731/** Raw: Invalid image file header. */
1732#define VERR_VD_RAW_INVALID_HEADER (-3270)
1733/** Raw: Invalid image file type. */
1734#define VERR_VD_RAW_INVALID_TYPE (-3271)
1735/** The backend needs more metadata before it can continue. */
1736#define VERR_VD_NOT_ENOUGH_METADATA (-3272)
1737/** Halt the current I/O context until further notification from the backend. */
1738#define VERR_VD_IOCTX_HALT (-3273)
1739/** The disk has a cache attached already. */
1740#define VERR_VD_CACHE_ALREADY_EXISTS (-3274)
1741/** There is no cache attached to the disk. */
1742#define VERR_VD_CACHE_NOT_FOUND (-3275)
1743/** The cache is not up to date with the image. */
1744#define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276)
1745/** The given range does not meet the required alignment. */
1746#define VERR_VD_DISCARD_ALIGNMENT_NOT_MET (-3277)
1747/** The discard operation is not supported for this image. */
1748#define VERR_VD_DISCARD_NOT_SUPPORTED (-3278)
1749/** The image is the correct format but is corrupted. */
1750#define VERR_VD_IMAGE_CORRUPTED (-3279)
1751/** Repairing the image is not supported. */
1752#define VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED (-3280)
1753/** Repairing the image is not possible because the corruption is to severe. */
1754#define VERR_VD_IMAGE_REPAIR_IMPOSSIBLE (-3281)
1755/** Reading from the image was not possible because the offset is out of the image range.
1756 * This usually indicates that there is a minor corruption in the image meta data. */
1757#define VERR_VD_READ_OUT_OF_RANGE (-3282)
1758/** Block read was marked as free in the image and returned as a zero block. */
1759#define VINF_VD_NEW_ZEROED_BLOCK 3283
1760/** Unable to parse the XML in DMG file. */
1761#define VERR_VD_DMG_XML_PARSE_ERROR (-3284)
1762/** Unable to locate a usable DMG file within the XAR archive. */
1763#define VERR_VD_DMG_NOT_FOUND_INSIDE_XAR (-3285)
1764/** The size of the raw image is not dividable by 512 */
1765#define VERR_VD_RAW_SIZE_MODULO_512 (-3286)
1766/** The size of the raw image is not dividable by 2048 */
1767#define VERR_VD_RAW_SIZE_MODULO_2048 (-3287)
1768/** The size of the raw optical image is too small (<= 32K) */
1769#define VERR_VD_RAW_SIZE_OPTICAL_TOO_SMALL (-3288)
1770/** The size of the raw floppy image is too big (>2.88MB) */
1771#define VERR_VD_RAW_SIZE_FLOPPY_TOO_BIG (-3289)
1772/** Reducing the size is not supported */
1773#define VERR_VD_SHRINK_NOT_SUPPORTED (-3290)
1774/** @} */
1775
1776
1777/** @name VBox Guest Library (VBGL) Status Codes
1778 * @{
1779 */
1780/** Library was not initialized. */
1781#define VERR_VBGL_NOT_INITIALIZED (-3300)
1782/** Virtual address was not allocated by the library. */
1783#define VERR_VBGL_INVALID_ADDR (-3301)
1784/** IOCtl to VBoxGuest driver failed. */
1785#define VERR_VBGL_IOCTL_FAILED (-3302)
1786/** @} */
1787
1788
1789/** @name VBox USB (VUSB) Status Codes
1790 * @{
1791 */
1792/** No available ports on the hub.
1793 * This error is returned when a device is attempted created and/or attached
1794 * to a hub which is out of ports. */
1795#define VERR_VUSB_NO_PORTS (-3400)
1796/** The requested operation cannot be performed on a detached USB device. */
1797#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1798/** Failed to allocate memory for a URB. */
1799#define VERR_VUSB_NO_URB_MEMORY (-3402)
1800/** General failure during URB queuing.
1801 * This will go away when the queueing gets proper status code handling. */
1802#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1803/** Device creation failed because the USB device name was not found. */
1804#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1805/** Not permitted to open the USB device.
1806 * The user doesn't have access to the device in the usbfs, check the mount options. */
1807#define VERR_VUSB_USBFS_PERMISSION (-3405)
1808/** The requested operation cannot be performed because the device
1809 * is currently being reset. */
1810#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1811/** The requested operation cannot be performed because the device
1812 * is currently suspended. */
1813#define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407)
1814/** Not permitted to open the USB device.
1815 * The user doesn't have access to the device node, check group memberships. */
1816#define VERR_VUSB_USB_DEVICE_PERMISSION (-3408)
1817/** @} */
1818
1819
1820/** @name VBox VGA Status Codes
1821 * @{
1822 */
1823/** One of the custom modes was incorrect.
1824 * The format or bit count of the custom mode value is invalid. */
1825#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1826/** The display connector is resizing. */
1827#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1828/** Unexpected PCI region change during VGA saved state loading. */
1829#define VERR_VGA_UNEXPECTED_PCI_REGION_LOAD_CHANGE (-3502)
1830/** Unabled to locate or load the OpenGL library. */
1831#define VERR_VGA_GL_LOAD_FAILURE (-3503)
1832/** Unabled to locate an OpenGL symbol. */
1833#define VERR_VGA_GL_SYMBOL_NOT_FOUND (-3504)
1834/** @} */
1835
1836
1837/** @name Internal Networking Status Codes
1838 * @{
1839 */
1840/** The networking interface to filter was not found. */
1841#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
1842/** The networking interface to filter was busy (used by someone). */
1843#define VERR_INTNET_FLT_IF_BUSY (-3601)
1844/** Failed to create or connect to a networking interface filter. */
1845#define VERR_INTNET_FLT_IF_FAILED (-3602)
1846/** The network already exists with a different trunk configuration. */
1847#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
1848/** The network already exists with a different security profile (restricted / public). */
1849#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
1850/** Failed to create a virtual network interface instance. */
1851#define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605)
1852/** Failed to retrieve a virtual network interface link ID. */
1853#define VERR_INTNET_FLT_VNIC_LINK_ID_NOT_FOUND (-3606)
1854/** Failed to initialize a virtual network interface instance. */
1855#define VERR_INTNET_FLT_VNIC_INIT_FAILED (-3607)
1856/** Failed to open a virtual network interface instance. */
1857#define VERR_INTNET_FLT_VNIC_OPEN_FAILED (-3608)
1858/** Failed to retrieve underlying (lower mac) link. */
1859#define VERR_INTNET_FLT_LOWER_LINK_INFO_NOT_FOUND (-3609)
1860/** Failed to open underlying link instance. */
1861#define VERR_INTNET_FLT_LOWER_LINK_OPEN_FAILED (-3610)
1862/** Failed to get underlying link ID. */
1863#define VERR_INTNET_FLT_LOWER_LINK_ID_NOT_FOUND (-3611)
1864/** @} */
1865
1866
1867/** @name Support Driver Status Codes
1868 * @{
1869 */
1870/** The component factory was not found. */
1871#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
1872/** The component factories do not support the requested interface. */
1873#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
1874/** The service module was not found. */
1875#define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702)
1876/** The host kernel is too old. */
1877#define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703)
1878/** Bad VTG magic value. */
1879#define VERR_SUPDRV_VTG_MAGIC (-3704)
1880/** Bad VTG bit count value. */
1881#define VERR_SUPDRV_VTG_BITS (-3705)
1882/** Bad VTG header - misc. */
1883#define VERR_SUPDRV_VTG_BAD_HDR_MISC (-3706)
1884/** Bad VTG header - offset. */
1885#define VERR_SUPDRV_VTG_BAD_HDR_OFF (-3707)
1886/** Bad VTG header - offset. */
1887#define VERR_SUPDRV_VTG_BAD_HDR_PTR (-3708)
1888/** Bad VTG header - to low value. */
1889#define VERR_SUPDRV_VTG_BAD_HDR_TOO_FEW (-3709)
1890/** Bad VTG header - to high value. */
1891#define VERR_SUPDRV_VTG_BAD_HDR_TOO_MUCH (-3710)
1892/** Bad VTG header - size value is not a multiple of the structure size. */
1893#define VERR_SUPDRV_VTG_BAD_HDR_NOT_MULTIPLE (-3711)
1894/** Bad VTG string table offset. */
1895#define VERR_SUPDRV_VTG_STRTAB_OFF (-3712)
1896/** Bad VTG string. */
1897#define VERR_SUPDRV_VTG_BAD_STRING (-3713)
1898/** VTG string is too long. */
1899#define VERR_SUPDRV_VTG_STRING_TOO_LONG (-3714)
1900/** Bad VTG attribute value. */
1901#define VERR_SUPDRV_VTG_BAD_ATTR (-3715)
1902/** Bad VTG provider descriptor. */
1903#define VERR_SUPDRV_VTG_BAD_PROVIDER (-3716)
1904/** Bad VTG probe descriptor. */
1905#define VERR_SUPDRV_VTG_BAD_PROBE (-3717)
1906/** Bad VTG argument list descriptor. */
1907#define VERR_SUPDRV_VTG_BAD_ARGLIST (-3718)
1908/** Bad VTG probe enabled data. */
1909#define VERR_SUPDRV_VTG_BAD_PROBE_ENABLED (-3719)
1910/** Bad VTG probe location record. */
1911#define VERR_SUPDRV_VTG_BAD_PROBE_LOC (-3720)
1912/** The VTG object for the session or image has already been registered. */
1913#define VERR_SUPDRV_VTG_ALREADY_REGISTERED (-3721)
1914/** A driver may only register one VTG object per session. */
1915#define VERR_SUPDRV_VTG_ONLY_ONCE_PER_SESSION (-3722)
1916/** A tracer has already been registered. */
1917#define VERR_SUPDRV_TRACER_ALREADY_REGISTERED (-3723)
1918/** The session has no tracer associated with it. */
1919#define VERR_SUPDRV_TRACER_NOT_REGISTERED (-3724)
1920/** The tracer has already been opened in this sesssion. */
1921#define VERR_SUPDRV_TRACER_ALREADY_OPENED (-3725)
1922/** The tracer has not been opened. */
1923#define VERR_SUPDRV_TRACER_NOT_OPENED (-3726)
1924/** There is no tracer present. */
1925#define VERR_SUPDRV_TRACER_NOT_PRESENT (-3727)
1926/** The tracer is unloading. */
1927#define VERR_SUPDRV_TRACER_UNLOADING (-3728)
1928/** Another thread in the session is talking to the tracer. */
1929#define VERR_SUPDRV_TRACER_SESSION_BUSY (-3729)
1930/** The tracer cannot open it self in the same session. */
1931#define VERR_SUPDRV_TRACER_CANNOT_OPEN_SELF (-3730)
1932/** Bad argument flags. */
1933#define VERR_SUPDRV_TRACER_BAD_ARG_FLAGS (-3731)
1934/** The session has reached the max number of (user mode) providers. */
1935#define VERR_SUPDRV_TRACER_TOO_MANY_PROVIDERS (-3732)
1936/** The tracepoint provider object is too large. */
1937#define VERR_SUPDRV_TRACER_TOO_LARGE (-3733)
1938/** The probe location array isn't adjacent to the probe enable array. */
1939#define VERR_SUPDRV_TRACER_UMOD_NOT_ADJACENT (-3734)
1940/** The user mode tracepoint provider has too many probe locations and
1941 * probes. */
1942#define VERR_SUPDRV_TRACER_UMOD_TOO_MANY_PROBES (-3735)
1943/** The user mode tracepoint provider string table is too large. */
1944#define VERR_SUPDRV_TRACER_UMOD_STRTAB_TOO_BIG (-3736)
1945/** The user mode tracepoint provider string table offset is bad. */
1946#define VERR_SUPDRV_TRACER_UMOD_STRTAB_OFF_BAD (-3737)
1947/** The VM process was denied access to vboxdrv because someone have managed to
1948 * open the process or its main thread with too broad access rights. */
1949#define VERR_SUPDRV_HARDENING_EVIL_HANDLE (-3738)
1950/** Error opening the ApiPort LPC object. */
1951#define VERR_SUPDRV_APIPORT_OPEN_ERROR (-3739)
1952/** Error enumerating all processes in the session. */
1953#define VERR_SUPDRV_SESSION_PROCESS_ENUM_ERROR (-3740)
1954/** The CSRSS instance associated with the client process could not be
1955 * located. */
1956#define VERR_SUPDRV_CSRSS_NOT_FOUND (-3741)
1957/** Type error opening the ApiPort LPC object. */
1958#define VERR_SUPDRV_APIPORT_OPEN_ERROR_TYPE (-3742)
1959/** Failed to measure the TSC delta between two CPUs. */
1960#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED (-3743)
1961/** Failed to calculate the TSC frequency. */
1962#define VERR_SUPDRV_TSC_FREQ_MEASUREMENT_FAILED (-3744)
1963/** Failed to get the delta-adjusted TSC value. */
1964#define VERR_SUPDRV_TSC_READ_FAILED (-3745)
1965/** Failed to measure the TSC delta between two CPUs, continue without any
1966 * TSC-delta. */
1967#define VWRN_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED 3746
1968/** A TSC-delta measurement request is currently being serviced. */
1969#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_BUSY (-3747)
1970/** The process trying to open VBoxDrv is not a budding VM process (1). */
1971#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_1 (-3748)
1972/** The process trying to open VBoxDrv is not a budding VM process (2). */
1973#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_2 (-3749)
1974
1975/** Raw-mode is unavailable courtesy of Hyper-V. */
1976#define VERR_SUPDRV_NO_RAW_MODE_HYPER_V_ROOT (-7000)
1977/** @} */
1978
1979
1980/** @name Support Library Status Codes
1981 * @{
1982 */
1983/** The specified path was not absolute (hardening). */
1984#define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750)
1985/** The specified path was not clean (hardening). */
1986#define VERR_SUPLIB_PATH_NOT_CLEAN (-3751)
1987/** The specified path is too long (hardening). */
1988#define VERR_SUPLIB_PATH_TOO_LONG (-3752)
1989/** The specified path is too short (hardening). */
1990#define VERR_SUPLIB_PATH_TOO_SHORT (-3753)
1991/** The specified path has too many components (hardening). */
1992#define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754)
1993/** The specified path is a root path (hardening). */
1994#define VERR_SUPLIB_PATH_IS_ROOT (-3755)
1995/** Failed to enumerate directory (hardening). */
1996#define VERR_SUPLIB_DIR_ENUM_FAILED (-3756)
1997/** Failed to stat a file/dir during enumeration (hardening). */
1998#define VERR_SUPLIB_STAT_ENUM_FAILED (-3757)
1999/** Failed to stat a file/dir (hardening). */
2000#define VERR_SUPLIB_STAT_FAILED (-3758)
2001/** Failed to fstat a native handle (hardening). */
2002#define VERR_SUPLIB_FSTAT_FAILED (-3759)
2003/** Found an illegal symbolic link (hardening). */
2004#define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760)
2005/** Found something which isn't a file nor a directory (hardening). */
2006#define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761)
2007/** The specified path is a directory and not a file (hardening). */
2008#define VERR_SUPLIB_IS_DIRECTORY (-3762)
2009/** The specified path is a file and not a directory (hardening). */
2010#define VERR_SUPLIB_IS_FILE (-3763)
2011/** The path is not the same object as the native handle (hardening). */
2012#define VERR_SUPLIB_NOT_SAME_OBJECT (-3764)
2013/** The owner is not root (hardening). */
2014#define VERR_SUPLIB_OWNER_NOT_ROOT (-3765)
2015/** The group is a non-system group and it has write access (hardening). */
2016#define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766)
2017/** The file or directory is world writable (hardening). */
2018#define VERR_SUPLIB_WORLD_WRITABLE (-3767)
2019/** The argv[0] of an internal application does not match the executable image
2020 * path (hardening). */
2021#define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768)
2022/** The internal application does not reside in the correct place (hardening). */
2023#define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769)
2024/** Unable to establish trusted of VM process (0). */
2025#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_0 (-3770)
2026/** Unable to establish trusted of VM process (1). */
2027#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_1 (-3771)
2028/** Unable to establish trusted of VM process (2). */
2029#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_2 (-3772)
2030/** Unable to establish trusted of VM process (3). */
2031#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_3 (-3773)
2032/** Unable to establish trusted of VM process (4). */
2033#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_4 (-3774)
2034/** Unable to establish trusted of VM process (5). */
2035#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_5 (-3775)
2036/** Unable to make text memory writeable (hardening). */
2037#define VERR_SUPLIB_TEXT_NOT_WRITEABLE (-3776)
2038/** Unable to seal text memory again to protect against write access (hardening). */
2039#define VERR_SUPLIB_TEXT_NOT_SEALED (-3777)
2040/** Unexpected instruction encountered for which there is no patch strategy
2041 * implemented (hardening). */
2042#define VERR_SUPLIB_UNEXPECTED_INSTRUCTION (-3778)
2043/** @} */
2044
2045
2046/** @name VBox GMM Status Codes
2047 * @{
2048 */
2049/** Unable to allocate more pages from the host system. */
2050#define VERR_GMM_OUT_OF_MEMORY (-3801)
2051/** Hit the global allocation limit.
2052 * If you know there is still sufficient memory available, try raising the limit. */
2053#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
2054/** Hit the a VM account limit. */
2055#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
2056/** Attempt to free more memory than what was previously allocated. */
2057#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
2058/** Attempted to report too many pages as deflated. */
2059#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
2060/** The page to be freed or updated was not found. */
2061#define VERR_GMM_PAGE_NOT_FOUND (-3806)
2062/** The specified shared page was not actually private. */
2063#define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
2064/** The specified shared page was not actually shared. */
2065#define VERR_GMM_PAGE_NOT_SHARED (-3808)
2066/** The page to be freed was already freed. */
2067#define VERR_GMM_PAGE_ALREADY_FREE (-3809)
2068/** The page to be updated or freed was noted owned by the caller. */
2069#define VERR_GMM_NOT_PAGE_OWNER (-3810)
2070/** The specified chunk was not found. */
2071#define VERR_GMM_CHUNK_NOT_FOUND (-3811)
2072/** The chunk has already been mapped into the process. */
2073#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
2074/** The chunk to be unmapped isn't actually mapped into the process. */
2075#define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
2076/** The chunk has been mapped too many times already (impossible). */
2077#define VERR_GMM_TOO_MANY_CHUNK_MAPPINGS (-3814)
2078/** The reservation or reservation update was declined - too many VMs, too
2079 * little memory, and/or too low GMM configuration. */
2080#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3815)
2081/** A GMM sanity check failed. */
2082#define VERR_GMM_IS_NOT_SANE (-3816)
2083/** Inserting a new chunk failed. */
2084#define VERR_GMM_CHUNK_INSERT (-3817)
2085/** Failed to obtain the GMM instance. */
2086#define VERR_GMM_INSTANCE (-3818)
2087/** Bad mutex semaphore flags. */
2088#define VERR_GMM_MTX_FLAGS (-3819)
2089/** Internal processing error in the page allocator. */
2090#define VERR_GMM_ALLOC_PAGES_IPE (-3820)
2091/** Invalid page count given to GMMR3FreePagesPerform. */
2092#define VERR_GMM_ACTUAL_PAGES_IPE (-3821)
2093/** The shared module name is too long. */
2094#define VERR_GMM_MODULE_NAME_TOO_LONG (-3822)
2095/** The shared module version string is too long. */
2096#define VERR_GMM_MODULE_VERSION_TOO_LONG (-3823)
2097/** The shared module has too many regions. */
2098#define VERR_GMM_TOO_MANY_REGIONS (-3824)
2099/** The guest has reported too many modules. */
2100#define VERR_GMM_TOO_MANY_PER_VM_MODULES (-3825)
2101/** The guest has reported too many modules. */
2102#define VERR_GMM_TOO_MANY_GLOBAL_MODULES (-3826)
2103/** The shared module is already registered. */
2104#define VINF_GMM_SHARED_MODULE_ALREADY_REGISTERED (3827)
2105/** The shared module clashed address wise with a previously registered
2106 * module. */
2107#define VERR_GMM_SHARED_MODULE_ADDRESS_CLASH (-3828)
2108/** The shared module was not found. */
2109#define VERR_GMM_SHARED_MODULE_NOT_FOUND (-3829)
2110/** The size of the shared module was out of range. */
2111#define VERR_GMM_BAD_SHARED_MODULE_SIZE (-3830)
2112/** The size of the one or more regions in the shared module was out of
2113 * range. */
2114#define VERR_GMM_SHARED_MODULE_BAD_REGIONS_SIZE (-3831)
2115/** @} */
2116
2117
2118/** @name VBox GVM Status Codes
2119 * @{
2120 */
2121/** The GVM is out of VM handle space. */
2122#define VERR_GVM_TOO_MANY_VMS (-3900)
2123/** The EMT was not blocked at the time of the call. */
2124#define VINF_GVM_NOT_BLOCKED 3901
2125/** The EMT was not busy running guest code at the time of the call. */
2126#define VINF_GVM_NOT_BUSY_IN_GC 3902
2127/** RTThreadYield was called during a GVMMR0SchedPoll call. */
2128#define VINF_GVM_YIELDED 3903
2129/** @} */
2130
2131
2132/** @name VBox VMX Status Codes
2133 * @{
2134 */
2135/** VMXON failed; possibly because it was already run before. */
2136#define VERR_VMX_VMXON_FAILED (-4000)
2137/** Invalid VMCS pointer.
2138 * (Can be OR'ed with VERR_VMX_INVALID_VMCS_FIELD.) */
2139#define VERR_VMX_INVALID_VMCS_PTR (-4001)
2140/** Invalid VMCS index or write to read-only element. */
2141#define VERR_VMX_INVALID_VMCS_FIELD (-4002)
2142/** Reserved for future status code that we wish to OR with
2143 * VERR_VMX_INVALID_VMCS_PTR and VERR_VMX_INVALID_VMCS_FIELD. */
2144#define VERR_VMX_RESERVED (-4003)
2145/** Invalid VMXON pointer. */
2146#define VERR_VMX_INVALID_VMXON_PTR (-4004)
2147/** Unable to start VM execution. */
2148#define VERR_VMX_UNABLE_TO_START_VM (-4005)
2149/** Unable to switch due to invalid host state. */
2150#define VERR_VMX_INVALID_HOST_STATE (-4006)
2151/** VMX CPU extension not available in hardware. */
2152#define VERR_VMX_NO_VMX (-4009)
2153/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
2154#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
2155/** Somebody cleared X86_CR4_VMXE in the CR4 register. */
2156#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
2157/** Failed to enable and lock VT-x features. */
2158#define VERR_VMX_MSR_LOCKING_FAILED (-4013)
2159/** Unable to switch due to invalid guest state. */
2160#define VERR_VMX_INVALID_GUEST_STATE (-4014)
2161/** Unexpected VM exit. */
2162#define VERR_VMX_UNEXPECTED_EXIT (-4015)
2163/** Unexpected VM exception. */
2164#define VERR_VMX_UNEXPECTED_EXCEPTION (-4016)
2165/** Unexpected interruption exit type. */
2166#define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE (-4017)
2167/** CPU is not in VMX root mode; unexpected when leaving VMX root mode. */
2168#define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018)
2169/** Undefined VM exit code. */
2170#define VERR_VMX_UNDEFINED_EXIT_CODE (-4019)
2171/** VMPTRLD failed; possibly because of invalid VMCS launch-state. */
2172#define VERR_VMX_VMPTRLD_FAILED (-4021)
2173/** Invalid VMCS pointer passed to VMLAUNCH/VMRESUME. */
2174#define VERR_VMX_INVALID_VMCS_PTR_TO_START_VM (-4022)
2175/** Internal VMX processing error no 1. */
2176#define VERR_VMX_IPE_1 (-4023)
2177/** Internal VMX processing error no 2. */
2178#define VERR_VMX_IPE_2 (-4024)
2179/** Internal VMX processing error no 3. */
2180#define VERR_VMX_IPE_3 (-4025)
2181/** Internal VMX processing error no 4. */
2182#define VERR_VMX_IPE_4 (-4026)
2183/** Internal VMX processing error no 5. */
2184#define VERR_VMX_IPE_5 (-4027)
2185/** VT-x features for all modes (SMX and non-SMX) disabled by the BIOS. */
2186#define VERR_VMX_MSR_ALL_VMX_DISABLED (-4028)
2187/** VT-x features disabled by the BIOS. */
2188#define VERR_VMX_MSR_VMX_DISABLED (-4029)
2189/** VT-x VMCS field cache invalid. */
2190#define VERR_VMX_VMCS_FIELD_CACHE_INVALID (-4030)
2191/** Failed to set VMXON enable bit while enabling VT-x through the MSR. */
2192#define VERR_VMX_MSR_VMX_ENABLE_FAILED (-4031)
2193/** Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR. */
2194#define VERR_VMX_MSR_SMX_VMX_ENABLE_FAILED (-4032)
2195/** An operation caused a nested-guest VM-exit. */
2196#define VINF_VMX_VMEXIT 4033
2197/** Generic VM-entry failure. */
2198#define VERR_VMX_VMENTRY_FAILED (-4033)
2199/** Generic VM-exit failure. */
2200#define VERR_VMX_VMEXIT_FAILED (-4034)
2201/** The requested nested-guest VMX intercept is not active or not in
2202 * nested-guest execution mode. */
2203#define VINF_VMX_INTERCEPT_NOT_ACTIVE 4035
2204/** The behavior of the instruction/operation is modified/needs modification
2205 * in VMX non-root mode. */
2206#define VINF_VMX_MODIFIES_BEHAVIOR 4036
2207/** VMLAUNCH/VMRESUME succeeded, can enter nested-guest execution. */
2208#define VINF_VMX_VMLAUNCH_VMRESUME 4037
2209/** VT-x VMCS launch state invalid. */
2210#define VERR_VMX_INVALID_VMCS_LAUNCH_STATE (-4038)
2211/** Precodition no 0 in hmR0VMXStartVm failed. */
2212#define VERR_VMX_STARTVM_PRECOND_0 (-4039)
2213/** Precodition no 1 in hmR0VMXStartVm failed. */
2214#define VERR_VMX_STARTVM_PRECOND_1 (-4040)
2215/** Precodition no 2 in hmR0VMXStartVm failed. */
2216#define VERR_VMX_STARTVM_PRECOND_2 (-4041)
2217/** Precodition no 3 in hmR0VMXStartVm failed. */
2218#define VERR_VMX_STARTVM_PRECOND_3 (-4042)
2219/** @} */
2220
2221
2222/** @name VBox SVM Status Codes
2223 * @{
2224 */
2225/** Unable to start VM execution. */
2226#define VERR_SVM_UNABLE_TO_START_VM (-4050)
2227/** AMD-V bit not set in K6_EFER MSR */
2228#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
2229/** AMD-V CPU extension not available. */
2230#define VERR_SVM_NO_SVM (-4052)
2231/** AMD-V CPU extension disabled (by BIOS). */
2232#define VERR_SVM_DISABLED (-4053)
2233/** AMD-V CPU extension in-use. */
2234#define VERR_SVM_IN_USE (-4054)
2235/** Invalid pVMCB. */
2236#define VERR_SVM_INVALID_PVMCB (-4055)
2237/** Unexpected SVM exit. */
2238#define VERR_SVM_UNEXPECTED_EXIT (-4056)
2239/** Unexpected SVM exception exit. */
2240#define VERR_SVM_UNEXPECTED_XCPT_EXIT (-4057)
2241/** Unexpected SVM patch type. */
2242#define VERR_SVM_UNEXPECTED_PATCH_TYPE (-4058)
2243/** Unable to start VM execution due to an invalid guest state. */
2244#define VERR_SVM_INVALID_GUEST_STATE (-4059)
2245/** Unknown or unrecognized SVM exit. */
2246#define VERR_SVM_UNKNOWN_EXIT (-4060)
2247/** Internal SVM processing error no 1. */
2248#define VERR_SVM_IPE_1 (-4061)
2249/** Internal SVM processing error no 2. */
2250#define VERR_SVM_IPE_2 (-4062)
2251/** Internal SVM processing error no 3. */
2252#define VERR_SVM_IPE_3 (-4063)
2253/** Internal SVM processing error no 4. */
2254#define VERR_SVM_IPE_4 (-4064)
2255/** Internal SVM processing error no 5. */
2256#define VERR_SVM_IPE_5 (-4065)
2257/** The nested-guest \#VMEXIT processing failed, initiate shutdown. */
2258#define VERR_SVM_VMEXIT_FAILED (-4066)
2259/** An operation caused a nested-guest SVM \#VMEXIT. */
2260#define VINF_SVM_VMEXIT 4067
2261/** VMRUN emulation succeeded, ready to immediately enter the nested-guest. */
2262#define VINF_SVM_VMRUN 4068
2263/** The requested nested-guest SVM intercept is not active or not in
2264 * nested-guest execution mode. */
2265#define VINF_SVM_INTERCEPT_NOT_ACTIVE 4069
2266/** Precodition no 0 in hmR0SvmVmRun failed. */
2267#define VERR_SVM_VMRUN_PRECOND_0 (-4070)
2268/** Precodition no 1 in hmR0SvmVmRun failed. */
2269#define VERR_SVM_VMRUN_PRECOND_1 (-4071)
2270/** Precodition no 2 in hmR0SvmVmRun failed. */
2271#define VERR_SVM_VMRUN_PRECOND_2 (-4072)
2272/** Precodition no 3 in hmR0SvmVmRun failed. */
2273#define VERR_SVM_VMRUN_PRECOND_3 (-4073)
2274/** @} */
2275
2276
2277/** @name VBox HM Status Codes
2278 * @{
2279 */
2280/** Host is about to go into suspend mode. */
2281#define VERR_HM_SUSPEND_PENDING (-4100)
2282/** Conflicting CFGM values. */
2283#define VERR_HM_CONFIG_MISMATCH (-4103)
2284/** Internal processing error in the HM init code. */
2285#define VERR_HM_ALREADY_ENABLED_IPE (-4104)
2286/** Unexpected MSR in the auto-load/store area. */
2287#define VERR_HM_UNEXPECTED_LD_ST_MSR (-4105)
2288/** No 32-bit to 64-bit switcher in place. */
2289#define VERR_HM_NO_32_TO_64_SWITCHER (-4106)
2290/** HMR0Leave was called on the wrong CPU. */
2291#define VERR_HM_WRONG_CPU (-4107)
2292/** Internal processing error \#1 in the HM code. */
2293#define VERR_HM_IPE_1 (-4108)
2294/** Internal processing error \#2 in the HM code. */
2295#define VERR_HM_IPE_2 (-4109)
2296/** Wrong 32/64-bit switcher. */
2297#define VERR_HM_WRONG_SWITCHER (-4110)
2298/** Unknown I/O instruction. */
2299#define VERR_HM_UNKNOWN_IO_INSTRUCTION (-4111)
2300/** Unsupported CPU feature combination. */
2301#define VERR_HM_UNSUPPORTED_CPU_FEATURE_COMBO (-4112)
2302/** Internal processing error \#3 in the HM code. */
2303#define VERR_HM_IPE_3 (-4113)
2304/** Internal processing error \#4 in the HM code. */
2305#define VERR_HM_IPE_4 (-4114)
2306/** Internal processing error \#5 in the HM code. */
2307#define VERR_HM_IPE_5 (-4115)
2308/** Invalid HM64ON32OP value. */
2309#define VERR_HM_INVALID_HM64ON32OP (-4116)
2310/** Resume guest execution after injecting a double-fault. */
2311#define VINF_HM_DOUBLE_FAULT 4117
2312/** Pending exception; continue guest execution. */
2313#define VINF_HM_PENDING_XCPT 4118
2314/** @} */
2315
2316
2317/** @name VBox Disassembler Status Codes
2318 * @{
2319 */
2320/** Invalid opcode byte(s) */
2321#define VERR_DIS_INVALID_OPCODE (-4200)
2322/** Generic failure during disassembly. */
2323#define VERR_DIS_GEN_FAILURE (-4201)
2324/** No read callback. */
2325#define VERR_DIS_NO_READ_CALLBACK (-4202)
2326/** Invalid Mod/RM. */
2327#define VERR_DIS_INVALID_MODRM (-4203)
2328/** Invalid parameter index. */
2329#define VERR_DIS_INVALID_PARAMETER (-4204)
2330/** The instruction is too long. */
2331#define VERR_DIS_TOO_LONG_INSTR (-4206)
2332/** @} */
2333
2334
2335/** @name VBox Webservice Status Codes
2336 * @{
2337 */
2338/** Authentication failed (ISessionManager::logon()) */
2339#define VERR_WEB_NOT_AUTHENTICATED (-4300)
2340/** Invalid format of managed object reference */
2341#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
2342/** Invalid session ID in managed object reference */
2343#define VERR_WEB_INVALID_SESSION_ID (-4302)
2344/** Invalid object ID in managed object reference */
2345#define VERR_WEB_INVALID_OBJECT_ID (-4303)
2346/** Unsupported interface for managed object reference */
2347#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
2348/** @} */
2349
2350
2351/** @name VBox PARAV Status Codes
2352 * @{
2353 */
2354/** Switch back to host */
2355#define VINF_PARAV_SWITCH_TO_HOST 4400
2356
2357/** @} */
2358
2359/** @name VBox Video HW Acceleration command status
2360 * @{
2361 */
2362/** command processing is pending, a completion handler will be called */
2363#define VINF_VHWA_CMD_PENDING 4500
2364
2365/** @} */
2366
2367
2368/** @name VBox COM error codes
2369 *
2370 * @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses
2371 * these for conversion that is lossless with respect to important COM
2372 * status codes. These methods should be moved to the glue library.
2373 * @{ */
2374/** Unexpected turn of events. */
2375#define VERR_COM_UNEXPECTED (-4600)
2376/** The base of the VirtualBox COM status codes (the lower value)
2377 * corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */
2378#define VERR_COM_VBOX_LOWEST (-4699)
2379/** Object corresponding to the supplied arguments does not exist. */
2380#define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1)
2381/** Current virtual machine state prevents the operation. */
2382#define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2)
2383/** Virtual machine error occurred attempting the operation. */
2384#define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3)
2385/** File not accessible or erroneous file contents. */
2386#define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4)
2387/** IPRT error. */
2388#define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5)
2389/** Pluggable Device Manager error. */
2390#define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6)
2391/** Current object state prohibits operation. */
2392#define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7)
2393/** Host operating system related error. */
2394#define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8)
2395/** Requested operation is not supported. */
2396#define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9)
2397/** Invalid XML found. */
2398#define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10)
2399/** Current session state prohibits operation. */
2400#define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11)
2401/** Object being in use prohibits operation. */
2402#define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12)
2403/** Returned by callback methods which does not need to be called
2404 * again because the client does not actually make use of them. */
2405#define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13)
2406/** @} */
2407
2408/** @name VBox VMMDev Status codes
2409 * @{
2410 */
2411/** CPU hotplug events from VMMDev are not monitored by the guest. */
2412#define VERR_VMMDEV_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700)
2413/** @} */
2414
2415/** @name VBox async I/O manager Status Codes
2416 * @{
2417 */
2418/** Async I/O task is pending, a completion handler will be called. */
2419#define VINF_AIO_TASK_PENDING 4800
2420/** @} */
2421
2422/** @name VBox Virtual SCSI Status Codes
2423 * @{
2424 */
2425/** LUN type is not supported. */
2426#define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900)
2427/** LUN is already/still attached to a device. */
2428#define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901)
2429/** The specified LUN is invalid. */
2430#define VERR_VSCSI_LUN_INVALID (-4902)
2431/** The LUN is not attached to the device. */
2432#define VERR_VSCSI_LUN_NOT_ATTACHED (-4903)
2433/** The LUN is still busy. */
2434#define VERR_VSCSI_LUN_BUSY (-4904)
2435/** @} */
2436
2437/** @name VBox FAM Status Codes
2438 * @{
2439 */
2440/** FAM failed to open a connection. */
2441#define VERR_FAM_OPEN_FAILED (-5000)
2442/** FAM failed to add a file to the list to be monitored. */
2443#define VERR_FAM_MONITOR_FILE_FAILED (-5001)
2444/** FAM failed to add a directory to the list to be monitored. */
2445#define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002)
2446/** The connection to the FAM daemon was lost. */
2447#define VERR_FAM_CONNECTION_LOST (-5003)
2448/** @} */
2449
2450
2451/** @name PCI Bus & Passthrough Status Codes
2452 * @{
2453 */
2454/** RamPreAlloc not set.
2455 * RAM pre-allocation is currently a requirement for PCI passthrough. */
2456#define VERR_PCI_PASSTHROUGH_NO_RAM_PREALLOC (-5100)
2457/** VT-x/AMD-V not active.
2458 * PCI passthrough currently works only if VT-x/AMD-V is active. */
2459#define VERR_PCI_PASSTHROUGH_NO_HM (-5101)
2460/** Nested paging not active.
2461 * PCI passthrough currently works only if nested paging is active. */
2462#define VERR_PCI_PASSTHROUGH_NO_NESTED_PAGING (-5102)
2463
2464/** Special return code from a PCI I/O region mapping handler that tells the BUS
2465 * that it has done the mapping already. */
2466#define VINF_PCI_MAPPING_DONE 5150
2467/** @} */
2468
2469
2470/** @name GVMM Status Codes
2471 * @{
2472 */
2473/** Internal error obtaining the GVMM instance. */
2474#define VERR_GVMM_INSTANCE (-5200)
2475/** GVMM does not support the range of CPUs present/possible on the host. */
2476#define VERR_GVMM_HOST_CPU_RANGE (-5201)
2477/** GVMM ran into some broken IPRT code. */
2478#define VERR_GVMM_BROKEN_IPRT (-5202)
2479/** Internal processing error \#1 in the GVMM code. */
2480#define VERR_GVMM_IPE_1 (-5203)
2481/** Internal processing error \#2 in the GVMM code. */
2482#define VERR_GVMM_IPE_2 (-5204)
2483/** Cannot destroy VM because not all other EMTs have deregistered. */
2484#define VERR_GVMM_NOT_ALL_EMTS_DEREGISTERED (-5205)
2485/** @} */
2486
2487
2488/** @name IEM Status Codes
2489 * @{ */
2490/** The instruction is not yet implemented by IEM. */
2491#define VERR_IEM_INSTR_NOT_IMPLEMENTED (-5300)
2492/** Invalid operand size passed to an IEM function. */
2493#define VERR_IEM_INVALID_OPERAND_SIZE (-5301)
2494/** Invalid address mode passed to an IEM function. */
2495#define VERR_IEM_INVALID_ADDRESS_MODE (-5302)
2496/** Invalid effective segment register number passed to an IEM function. */
2497#define VERR_IEM_INVALID_EFF_SEG (-5303)
2498/** Invalid instruction length passed to an IEM function. */
2499#define VERR_IEM_INVALID_INSTR_LENGTH (-5304)
2500/** Internal status code for indicating that a selector isn't valid (LAR, LSL,
2501 * VERR, VERW). This is not used outside the instruction implementations. */
2502#define VINF_IEM_SELECTOR_NOT_OK (5305)
2503/** Returns by rep-prefixed string instruction if they yield because of
2504 * pending FFs. The status code is internal to IEM. */
2505#define VINF_IEM_YIELD_PENDING_FF (5306)
2506
2507/** Recompiled execution: Break out of current TB execution. */
2508#define VINF_IEM_REEXEC_BREAK (5310)
2509/** Recompiled execution: Debug related (hidden) EFLAGS are set and needs
2510 * handling. */
2511#define VINF_IEM_REEXEC_FINISH_WITH_FLAGS (5311)
2512
2513/** Recompilation: End translation block. */
2514#define VINF_IEM_RECOMPILE_END_TB (5319)
2515/** Recompiler: Translation block allocation failed. */
2516#define VERR_IEM_TB_ALLOC_FAILED (-5320)
2517/** Recompiler: Too deeply nested conditionals. */
2518#define VERR_IEM_COND_TOO_DEEPLY_NESTED (-5321)
2519/** Recompiler: Failed to reconcile the register/variable state on endif. */
2520#define VERR_IEM_COND_ENDIF_RECONCILIATION_FAILED (-5322)
2521/** Recompiler: Failed to allocate more memory for debug info. */
2522#define VERR_IEM_DBGINFO_OUT_OF_MEMORY (-5323)
2523/** Recompiler: Debug info internal processing error \#1. */
2524#define VERR_IEM_DBGINFO_IPE_1 (-5324)
2525/** Recompiler: Debug info internal processing error \#2. */
2526#define VERR_IEM_DBGINFO_IPE_2 (-5325)
2527/** Recompiler: Fixup internal processing error \#1. */
2528#define VERR_IEM_FIXUP_IPE_1 (-5326)
2529/** Recompiler: Too many fixups. */
2530#define VERR_IEM_FIXUP_TOO_MANY (-5327)
2531/** Recompiler: Out of memory. */
2532#define VERR_IEM_FIXUP_OUT_OF_MEMORY (-5328)
2533/** Recompiler: Hit instruction buffer size limit. */
2534#define VERR_IEM_INSTR_BUF_TOO_LARGE (-5329)
2535/** Recompiler: Out of memory for the instruction buffer (regular heap). */
2536#define VERR_IEM_INSTR_BUF_OUT_OF_MEMORY (-5330)
2537/** Recompiler: Too many labels. */
2538#define VERR_IEM_LABEL_TOO_MANY (-5331)
2539/** Recompiler: Out of memory for labels. */
2540#define VERR_IEM_LABEL_OUT_OF_MEMORY (-5332)
2541/** Recompiler: Label internal processing error \#1. */
2542#define VERR_IEM_LABEL_IPE_1 (-5333)
2543/** Recompiler: Label internal processing error \#2. */
2544#define VERR_IEM_LABEL_IPE_2 (-5334)
2545/** Recompiler: Label internal processing error \#3. */
2546#define VERR_IEM_LABEL_IPE_3 (-5335)
2547/** Recompiler: Label internal processing error \#4. */
2548#define VERR_IEM_LABEL_IPE_4 (-5336)
2549/** Recompiler: Label internal processing error \#5. */
2550#define VERR_IEM_LABEL_IPE_5 (-5337)
2551/** Recompiler: Label internal processing error \#6. */
2552#define VERR_IEM_LABEL_IPE_6 (-5338)
2553
2554/** Recompiler: No temporary host register available. */
2555#define VERR_IEM_REG_ALLOCATOR_NO_FREE_TMP (-5340)
2556/** Recompiler: No host register available for variables. */
2557#define VERR_IEM_REG_ALLOCATOR_NO_FREE_VAR (-5341)
2558/** Recompiler: Register allocator internal processing error \#1. */
2559#define VERR_IEM_REG_IPE_1 (-5343)
2560/** Recompiler: Register allocator internal processing error \#2. */
2561#define VERR_IEM_REG_IPE_2 (-5344)
2562/** Recompiler: Register allocator internal processing error \#3. */
2563#define VERR_IEM_REG_IPE_3 (-5345)
2564/** Recompiler: Register allocator internal processing error \#4. */
2565#define VERR_IEM_REG_IPE_4 (-5346)
2566/** Recompiler: Register allocator internal processing error \#5. */
2567#define VERR_IEM_REG_IPE_5 (-5347)
2568/** Recompiler: Register allocator internal processing error \#6. */
2569#define VERR_IEM_REG_IPE_6 (-5348)
2570/** Recompiler: Register allocator internal processing error \#7. */
2571#define VERR_IEM_REG_IPE_7 (-5349)
2572/** Recompiler: Register allocator internal processing error \#8. */
2573#define VERR_IEM_REG_IPE_8 (-5350)
2574/** Recompiler: Register allocator internal processing error \#9. */
2575#define VERR_IEM_REG_IPE_9 (-5351)
2576/** Recompiler: Register allocator internal processing error \#10. */
2577#define VERR_IEM_REG_IPE_10 (-5352)
2578/** Recompiler: Register allocator internal processing error \#11. */
2579#define VERR_IEM_REG_IPE_11 (-5353)
2580/** Recompiler: Register allocator internal processing error \#12. */
2581#define VERR_IEM_REG_IPE_12 (-5354)
2582/** Recompiler: Register allocator internal processing error \#13. */
2583#define VERR_IEM_REG_IPE_13 (-5355)
2584
2585/** Recompiler: Out of variables. */
2586#define VERR_IEM_VAR_EXHAUSTED (-5360)
2587/** Recompiler: Duplicate argument variable number. */
2588#define VERR_IEM_VAR_DUP_ARG_NO (-5361)
2589/** Recompiler: Out of stack slots. */
2590#define VERR_IEM_VAR_OUT_OF_STACK_SLOTS (-5362)
2591/** Recompiler: Unexpected kind of variable. */
2592#define VERR_IEM_VAR_UNEXPECTED_KIND (-5363)
2593/** Recompiler: Uninitialized variable. */
2594#define VERR_IEM_VAR_NOT_INITIALIZED (-5364)
2595/** Recompiler: Variable management internal processing error \#1. */
2596#define VERR_IEM_VAR_IPE_1 (-5365)
2597/** Recompiler: Variable management internal processing error \#2. */
2598#define VERR_IEM_VAR_IPE_2 (-5366)
2599/** Recompiler: Variable management internal processing error \#3. */
2600#define VERR_IEM_VAR_IPE_3 (-5367)
2601/** Recompiler: Variable management internal processing error \#4. */
2602#define VERR_IEM_VAR_IPE_4 (-5368)
2603/** Recompiler: Variable management internal processing error \#5. */
2604#define VERR_IEM_VAR_IPE_5 (-5369)
2605/** Recompiler: Variable management internal processing error \#6. */
2606#define VERR_IEM_VAR_IPE_6 (-5370)
2607/** Recompiler: Variable management internal processing error \#7. */
2608#define VERR_IEM_VAR_IPE_7 (-5371)
2609/** Recompiler: Variable management internal processing error \#8. */
2610#define VERR_IEM_VAR_IPE_8 (-5372)
2611/** Recompiler: Variable management internal processing error \#9. */
2612#define VERR_IEM_VAR_IPE_9 (-5373)
2613/** Recompiler: Variable management internal processing error \#10. */
2614#define VERR_IEM_VAR_IPE_10 (-5374)
2615/** Recompiler: Variable management internal processing error \#11. */
2616#define VERR_IEM_VAR_IPE_11 (-5375)
2617/** Recompiler: Variable management internal processing error \#12. */
2618#define VERR_IEM_VAR_IPE_12 (-5376)
2619/** Recompiler: Variable management internal processing error \#13. */
2620#define VERR_IEM_VAR_IPE_13 (-5377)
2621
2622/** Recompiler: Unimplemented case. */
2623#define VERR_IEM_EMIT_CASE_NOT_IMPLEMENTED_1 (-5380)
2624/** Recompiler: Totally unexpected memory size. */
2625#define VERR_IEM_EMIT_BAD_MEM_SIZE (-5381)
2626/** Recompiler: Bad segment register number for memory access. */
2627#define VERR_IEM_EMIT_BAD_SEG_REG_NO (-5382)
2628/** Recompiler: Fixed jump is out of range. */
2629#define VERR_IEM_EMIT_FIXED_JUMP_OUT_OF_RANGE (-5383)
2630
2631/** Restart the current instruction. For testing only. */
2632#define VERR_IEM_RESTART_INSTRUCTION (-5389)
2633/** This particular aspect of the instruction is not yet implemented by IEM. */
2634#define VERR_IEM_ASPECT_NOT_IMPLEMENTED (-5390)
2635/** Internal processing error \#1 in the IEM code. */
2636#define VERR_IEM_IPE_1 (-5391)
2637/** Internal processing error \#2 in the IEM code. */
2638#define VERR_IEM_IPE_2 (-5392)
2639/** Internal processing error \#3 in the IEM code. */
2640#define VERR_IEM_IPE_3 (-5393)
2641/** Internal processing error \#4 in the IEM code. */
2642#define VERR_IEM_IPE_4 (-5394)
2643/** Internal processing error \#5 in the IEM code. */
2644#define VERR_IEM_IPE_5 (-5395)
2645/** Internal processing error \#6 in the IEM code. */
2646#define VERR_IEM_IPE_6 (-5396)
2647/** Internal processing error \#7 in the IEM code. */
2648#define VERR_IEM_IPE_7 (-5397)
2649/** Internal processing error \#8 in the IEM code. */
2650#define VERR_IEM_IPE_8 (-5398)
2651/** Internal processing error \#9 in the IEM code. */
2652#define VERR_IEM_IPE_9 (-5399)
2653/** @} */
2654
2655
2656/** @name DBGC Status Codes
2657 * @{ */
2658/** Status that causes DBGC to quit. */
2659#define VERR_DBGC_QUIT (-5400)
2660/** Async command pending. */
2661#define VWRN_DBGC_CMD_PENDING 5401
2662/** The command has already been registered. */
2663#define VWRN_DBGC_ALREADY_REGISTERED 5402
2664/** The command cannot be deregistered because has not been registered. */
2665#define VERR_DBGC_COMMANDS_NOT_REGISTERED (-5403)
2666/** Unknown breakpoint. */
2667#define VERR_DBGC_BP_NOT_FOUND (-5404)
2668/** The breakpoint already exists. */
2669#define VERR_DBGC_BP_EXISTS (-5405)
2670/** The breakpoint has no command. */
2671#define VINF_DBGC_BP_NO_COMMAND 5406
2672/** Generic debugger command failure. */
2673#define VERR_DBGC_COMMAND_FAILED (-5407)
2674/** Logic bug in the DBGC code. */
2675#define VERR_DBGC_IPE (-5408)
2676
2677/** The lowest parse status code. */
2678#define VERR_DBGC_PARSE_LOWEST (-5499)
2679/** Syntax error - too few arguments. */
2680#define VERR_DBGC_PARSE_TOO_FEW_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 0)
2681/** Syntax error - too many arguments. */
2682#define VERR_DBGC_PARSE_TOO_MANY_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 1)
2683/** Syntax error - too many arguments for static storage. */
2684#define VERR_DBGC_PARSE_ARGUMENT_OVERFLOW (VERR_DBGC_PARSE_LOWEST + 2)
2685/** Syntax error - expected binary operator. */
2686#define VERR_DBGC_PARSE_EXPECTED_BINARY_OP (VERR_DBGC_PARSE_LOWEST + 3)
2687
2688/** Syntax error - the argument does not allow a range to be specified. */
2689#define VERR_DBGC_PARSE_NO_RANGE_ALLOWED (VERR_DBGC_PARSE_LOWEST + 5)
2690/** Syntax error - unbalanced quotes. */
2691#define VERR_DBGC_PARSE_UNBALANCED_QUOTE (VERR_DBGC_PARSE_LOWEST + 6)
2692/** Syntax error - unbalanced parenthesis. */
2693#define VERR_DBGC_PARSE_UNBALANCED_PARENTHESIS (VERR_DBGC_PARSE_LOWEST + 7)
2694/** Syntax error - an argument or subargument contains nothing useful. */
2695#define VERR_DBGC_PARSE_EMPTY_ARGUMENT (VERR_DBGC_PARSE_LOWEST + 8)
2696/** Syntax error - invalid operator usage. */
2697#define VERR_DBGC_PARSE_UNEXPECTED_OPERATOR (VERR_DBGC_PARSE_LOWEST + 9)
2698/** Syntax error - invalid numeric value. */
2699#define VERR_DBGC_PARSE_INVALID_NUMBER (VERR_DBGC_PARSE_LOWEST + 10)
2700/** Syntax error - numeric overflow. */
2701#define VERR_DBGC_PARSE_NUMBER_TOO_BIG (VERR_DBGC_PARSE_LOWEST + 11)
2702/** Syntax error - invalid operation attempted. */
2703#define VERR_DBGC_PARSE_INVALID_OPERATION (VERR_DBGC_PARSE_LOWEST + 12)
2704/** Syntax error - function not found. */
2705#define VERR_DBGC_PARSE_FUNCTION_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 13)
2706/** Syntax error - the specified function is not a function. */
2707#define VERR_DBGC_PARSE_NOT_A_FUNCTION (VERR_DBGC_PARSE_LOWEST + 14)
2708/** Syntax error - out of scratch memory. */
2709#define VERR_DBGC_PARSE_NO_SCRATCH (VERR_DBGC_PARSE_LOWEST + 15)
2710/** Syntax error - out of regular heap memory. */
2711#define VERR_DBGC_PARSE_NO_MEMORY (VERR_DBGC_PARSE_LOWEST + 16)
2712/** Syntax error - incorrect argument type. */
2713#define VERR_DBGC_PARSE_INCORRECT_ARG_TYPE (VERR_DBGC_PARSE_LOWEST + 17)
2714/** Syntax error - an undefined variable was referenced. */
2715#define VERR_DBGC_PARSE_VARIABLE_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 18)
2716/** Syntax error - a type conversion failed. */
2717#define VERR_DBGC_PARSE_CONVERSION_FAILED (VERR_DBGC_PARSE_LOWEST + 19)
2718/** Syntax error - you hit a debugger feature which isn't implemented yet.
2719 * (Feel free to help implement it.) */
2720#define VERR_DBGC_PARSE_NOT_IMPLEMENTED (VERR_DBGC_PARSE_LOWEST + 20)
2721/** Syntax error - Couldn't satisfy a request for a specific result type. */
2722#define VERR_DBGC_PARSE_BAD_RESULT_TYPE (VERR_DBGC_PARSE_LOWEST + 21)
2723/** Syntax error - Cannot read symbol value, it is a set-only symbol. */
2724#define VERR_DBGC_PARSE_WRITEONLY_SYMBOL (VERR_DBGC_PARSE_LOWEST + 22)
2725/** Syntax error - Invalid command name. */
2726#define VERR_DBGC_PARSE_INVALD_COMMAND_NAME (VERR_DBGC_PARSE_LOWEST + 23)
2727/** Syntax error - Command not found. */
2728#define VERR_DBGC_PARSE_COMMAND_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 24)
2729/** Syntax error - buggy parser. */
2730#define VERR_DBGC_PARSE_BUG (VERR_DBGC_PARSE_LOWEST + 25)
2731/** @} */
2732
2733
2734/** @name Support driver/library shared verification status codes.
2735 * @{ */
2736/** Process Verification Failure: The memory content does not match the image
2737 * file. */
2738#define VERR_SUP_VP_MEMORY_VS_FILE_MISMATCH (-5600)
2739/** Process Verification Failure: The memory protection of a image file section
2740 * does not match what the section header prescribes. */
2741#define VERR_SUP_VP_SECTION_PROTECTION_MISMATCH (-5601)
2742/** Process Verification Failure: One of the section in the image file is not
2743 * mapped into memory. */
2744#define VERR_SUP_VP_SECTION_NOT_MAPPED (-5602)
2745/** Process Verification Failure: One of the section in the image file is not
2746 * fully mapped into memory. */
2747#define VERR_SUP_VP_SECTION_NOT_FULLY_MAPPED (-5603)
2748/** Process Verification Failure: Bad file alignment value in image header. */
2749#define VERR_SUP_VP_BAD_FILE_ALIGNMENT_VALUE (-5604)
2750/** Process Verification Failure: Bad image base in header. */
2751#define VERR_SUP_VP_BAD_IMAGE_BASE (-5605)
2752/** Process Verification Failure: Bad image signature. */
2753#define VERR_SUP_VP_BAD_IMAGE_SIGNATURE (-5606)
2754/** Process Verification Failure: Bad image size. */
2755#define VERR_SUP_VP_BAD_IMAGE_SIZE (-5607)
2756/** Process Verification Failure: Bad new-header offset in the MZ header. */
2757#define VERR_SUP_VP_BAD_MZ_OFFSET (-5608)
2758/** Process Verification Failure: Bad optional header field. */
2759#define VERR_SUP_VP_BAD_OPTIONAL_HEADER (-5609)
2760/** Process Verification Failure: Bad section alignment value in image
2761 * header. */
2762#define VERR_SUP_VP_BAD_SECTION_ALIGNMENT_VALUE (-5610)
2763/** Process Verification Failure: Bad section raw data size. */
2764#define VERR_SUP_VP_BAD_SECTION_FILE_SIZE (-5611)
2765/** Process Verification Failure: Bad virtual section address. */
2766#define VERR_SUP_VP_BAD_SECTION_RVA (-5612)
2767/** Process Verification Failure: Bad virtual section size. */
2768#define VERR_SUP_VP_BAD_SECTION_VIRTUAL_SIZE (-5613)
2769/** Process Verification Failure: Bad size of image header. */
2770#define VERR_SUP_VP_BAD_SIZE_OF_HEADERS (-5614)
2771/** Process Verification Failure: The process is being debugged. */
2772#define VERR_SUP_VP_DEBUGGED (-5615)
2773/** Process Verification Failure: A DLL was found more than once. */
2774#define VERR_SUP_VP_DUPLICATE_DLL_MAPPING (-5616)
2775/** Process Verification Failure: Image section region is too large. */
2776#define VERR_SUP_VP_EMPTY_REGION_TOO_LARGE (-5617)
2777/** Process Verification Failure: Executable file name and process image name
2778 * does not match up. */
2779#define VERR_SUP_VP_EXE_VS_PROC_NAME_MISMATCH (-5618)
2780/** Process Verification Failure: Found executable memory allocated in the
2781 * process. There is only supposed be executable memory associated with
2782 * image file mappings (DLLs & EXE). */
2783#define VERR_SUP_VP_FOUND_EXEC_MEMORY (-5619)
2784/** Process Verification Failure: There is more than one known executable mapped
2785 * into the process. */
2786#define VERR_SUP_VP_FOUND_MORE_THAN_ONE_EXE_MAPPING (-5620)
2787/** Process Verification Failure: Error closing image file handle. */
2788#define VERR_SUP_VP_IMAGE_FILE_CLOSE_ERROR (-5621)
2789/** Process Verification Failure: Error opening image file. */
2790#define VERR_SUP_VP_IMAGE_FILE_OPEN_ERROR (-5622)
2791/** Process Verification Failure: Error reading image file header. */
2792#define VERR_SUP_VP_IMAGE_HDR_READ_ERROR (-5623)
2793/** Process Verification Failure: Image mapping is bogus as the first region
2794 * has different AllocationBase and BaseAddress values, indicating that a
2795 * section was unmapped or otherwise tampered with. */
2796#define VERR_SUP_VP_IMAGE_MAPPING_BASE_ERROR (-5624)
2797/** Process Verification Failure: Error reading process memory for comparing
2798 * with disk data. */
2799#define VERR_SUP_VP_MEMORY_READ_ERROR (-5625)
2800/** Process Verification Failure: Found no executable mapped into the process
2801 * address space. */
2802#define VERR_SUP_VP_NO_FOUND_NO_EXE_MAPPING (-5626)
2803/** Process Verification Failure: An image mapping failed to report a name. */
2804#define VERR_SUP_VP_NO_IMAGE_MAPPING_NAME (-5627)
2805/** Process Verification Failure: No KERNE32.DLL mapping found. This is
2806 * impossible. */
2807#define VERR_SUP_VP_NO_KERNEL32_MAPPING (-5628)
2808/** Process Verification Failure: Error allocating memory. */
2809#define VERR_SUP_VP_NO_MEMORY (-5629)
2810/** Process Verification Failure: Error allocating state memory or querying
2811 * the system32 path. */
2812#define VERR_SUP_VP_NO_MEMORY_STATE (-5630)
2813/** Process Verification Failure: No NTDLL.DLL mapping found. This is
2814 * impossible. */
2815#define VERR_SUP_VP_NO_NTDLL_MAPPING (-5631)
2816/** Process Verification Failure: A DLL residing outside System32 was found
2817 * in the process. */
2818#define VERR_SUP_VP_NON_SYSTEM32_DLL (-5632)
2819/** Process Verification Failure: An unknown and unwanted DLL was found loaded
2820 * into the process. */
2821#define VERR_SUP_VP_NOT_KNOWN_DLL_OR_EXE (-5633)
2822/** Process Verification Failure: The name of an image file changes between
2823 * mapping regions. */
2824#define VERR_SUP_VP_NT_MAPPING_NAME_CHANGED (-5634)
2825/** Process Verification Failure: Error querying process name. */
2826#define VERR_SUP_VP_NT_QI_PROCESS_NM_ERROR (-5635)
2827/** Process Verification Failure: Error querying thread information. */
2828#define VERR_SUP_VP_NT_QI_THREAD_ERROR (-5636)
2829/** Process Verification Failure: Error query virtual memory information. */
2830#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_ERROR (-5637)
2831/** Process Verification Failure: Error query virtual memory mapping name. */
2832#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_NM_ERROR (-5638)
2833/** Process Verification Failure: Error determining the full path of
2834 * System32. */
2835#define VERR_SUP_VP_SYSTEM32_PATH (-5639)
2836/** Process Verification Failure: The process has more than one thread. */
2837#define VERR_SUP_VP_THREAD_NOT_ALONE (-5640)
2838/** Process Verification Failure: The image mapping is too large (>= 2GB). */
2839#define VERR_SUP_VP_TOO_HIGH_REGION_RVA (-5641)
2840/** Process Verification Failure: The memory region is too large (>= 2GB). */
2841#define VERR_SUP_VP_TOO_LARGE_REGION (-5642)
2842/** Process Verification Failure: There are too many DLLs loaded. */
2843#define VERR_SUP_VP_TOO_MANY_DLLS_LOADED (-5643)
2844/** Process Verification Failure: An image has too many regions. */
2845#define VERR_SUP_VP_TOO_MANY_IMAGE_REGIONS (-5644)
2846/** Process Verification Failure: The process has too many virtual memory
2847 * regions. */
2848#define VERR_SUP_VP_TOO_MANY_MEMORY_REGIONS (-5645)
2849/** Process Verification Failure: An image has too many sections. */
2850#define VERR_SUP_VP_TOO_MANY_SECTIONS (-5646)
2851/** Process Verification Failure: An image is targeting an unexpected
2852 * machine/CPU. */
2853#define VERR_SUP_VP_UNEXPECTED_IMAGE_MACHINE (-5647)
2854/** Process Verification Failure: Unexpected section protection flag
2855 * combination. */
2856#define VERR_SUP_VP_UNEXPECTED_SECTION_FLAGS (-5648)
2857/** Process Verification Failure: Expected the process and exe to have forced
2858 * integrity checking enabled (verifying signatures). */
2859#define VERR_SUP_VP_EXE_MISSING_FORCE_INTEGRITY (-5649)
2860/** Process Verification Failure: Expected the process and exe to have dynamic
2861 * base enabled. */
2862#define VERR_SUP_VP_EXE_MISSING_DYNAMIC_BASE (-5650)
2863/** Process Verification Failure: Expected the process and exe to advertise
2864 * NX compatibility. */
2865#define VERR_SUP_VP_EXE_MISSING_NX_COMPAT (-5651)
2866/** Process Verification Failure: The DllCharacteristics of the process
2867 * does not match the value in the optional header in the exe file. */
2868#define VERR_SUP_VP_DLL_CHARECTERISTICS_MISMATCH (-5652)
2869/** Process Verification Failure: The ImageCharacteristics of the process
2870 * does not match the value in the file header in the exe file. */
2871#define VERR_SUP_VP_IMAGE_CHARECTERISTICS_MISMATCH (-5653)
2872/** Process Verification Failure: Error querying image information. */
2873#define VERR_SUP_VP_NT_QI_PROCESS_IMG_INFO_ERROR (-5654)
2874/** Process Verification Failure: Error querying debug port. */
2875#define VERR_SUP_VP_NT_QI_PROCESS_DBG_PORT_ERROR (-5655)
2876/** WinVerifyTrust failed with an unexpected status code when using the
2877 * catalog-file approach. */
2878#define VERR_SUP_VP_WINTRUST_CAT_FAILURE (-5656)
2879/** The image is required to be signed with the same certificate as the rest
2880 * of VirtualBox. */
2881#define VERR_SUP_VP_NOT_SIGNED_WITH_BUILD_CERT (-5657)
2882/** Internal processing error: Not build certificate. */
2883#define VERR_SUP_VP_NOT_BUILD_CERT_IPE (-5658)
2884/** The image requires to be signed using the kernel-code signing process. */
2885#define VERR_SUP_VP_NOT_VALID_KERNEL_CODE_SIGNATURE (-5659)
2886/** Unexpected number of valid paths. */
2887#define VERR_SUP_VP_UNEXPECTED_VALID_PATH_COUNT (-5660)
2888/** The image is required to force integrity checks. */
2889#define VERR_SUP_VP_SIGNATURE_CHECKS_NOT_ENFORCED (-5661)
2890/** Process Verification Failure: Symantec Endpoint Protection must be
2891 * disabled for the VirtualBox VM processes.
2892 * http://www.symantec.com/connect/articles/creating-application-control-exclusions-symantec-endpoint-protection-121 */
2893#define VERR_SUP_VP_SYSFER_DLL (-5662)
2894/** Process Purification Failure: KERNE32.DLL already mapped into the initial
2895 * process (suspended). */
2896#define VERR_SUP_VP_KERNEL32_ALREADY_MAPPED (-5663)
2897/** Process Purification Failure: NtFreeVirtualMemory failed on a chunk of
2898 * executable memory which shouldn't be present in the process. */
2899#define VERR_SUP_VP_FREE_VIRTUAL_MEMORY_FAILED (-5664)
2900/** Process Purification Failure: Both NtUnmapViewOfSetion and
2901 * NtProtectVirtualMemory failed to get rid of or passify an non-image
2902 * executable mapping. */
2903#define VERR_SUP_VP_UNMAP_AND_PROTECT_FAILED (-5665)
2904/** Process Purification Failure: Unknown memory type of executable memory. */
2905#define VERR_SUP_VP_UNKOWN_MEM_TYPE (-5666)
2906/** The image file is not owned by TrustedInstaller is it should be. */
2907#define VERR_SUP_VP_NOT_OWNED_BY_TRUSTED_INSTALLER (-5667)
2908/** The image is outside the expected range. */
2909#define VERR_SUP_VP_IMAGE_TOO_BIG (-5668)
2910/** Stub process not found so it cannot be revalidated when vboxdrv is opened
2911 * by the VM process. */
2912#define VERR_SUP_VP_STUB_NOT_FOUND (-5669)
2913/** Error opening the stub process for revalidation when vboxdrv is opened by
2914 * the VM process. */
2915#define VERR_SUP_VP_STUB_OPEN_ERROR (-5670)
2916/** Stub process thread not found during revalidation upon vboxdrv opening by
2917 * the VM process. */
2918#define VERR_SUP_VP_STUB_THREAD_NOT_FOUND (-5671)
2919/** Error opening the stub process thread for revalidation when vboxdrv is
2920 * opened by the VM process. */
2921#define VERR_SUP_VP_STUB_THREAD_OPEN_ERROR (-5672)
2922/** Process Purification Failure: NtAllocateVirtualMemory failed to get us
2923 * suitable replacement memory for a chunk of executable memory that
2924 * shouldn't be present in our process. (You will only see this message if you
2925 * got potentially fatally buggy anti-virus software installed.) */
2926#define VERR_SUP_VP_REPLACE_VIRTUAL_MEMORY_FAILED (-5673)
2927/** Error getting the file mode. */
2928#define VERR_SUP_VP_FILE_MODE_ERROR (-5674)
2929/** Error creating an event semaphore for used with asynchronous reads. */
2930#define VERR_SUP_VP_CREATE_READ_EVT_SEM_FAILED (-5675)
2931/** Undesirable module. */
2932#define VERR_SUP_VP_UNDESIRABLE_MODULE (-5676)
2933/** NtQueryObject/Type failed. */
2934#define VERR_SUP_VP_QUERY_HANDLE_TYPE (-5677)
2935/** NtSetInformationObject/NoInherit failed. */
2936#define VERR_SUP_VP_SET_HANDLE_NOINHERIT (-5678)
2937
2938/** We are in driverless mode. */
2939#define VERR_SUP_DRIVERLESS (-5699)
2940/** We are in driverless mode. */
2941#define VINF_SUP_DRIVERLESS 5699
2942/** @} */
2943
2944/** @name VBox Extension Pack Status Codes
2945 * @{
2946 */
2947/** The host is not supported. Uninstall the extension pack.
2948 * Returned by the VBOXEXTPACKREG::pfnInstalled. */
2949#define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-6000)
2950/** The VirtualBox version is not supported by one of the extension packs.
2951 *
2952 * You have probably upgraded VirtualBox recently. Please upgrade the
2953 * extension packs to versions compatible with this VirtualBox release.
2954 */
2955#define VERR_EXTPACK_VBOX_VERSION_MISMATCH (-6001)
2956/** @} */
2957
2958
2959/** @name VBox Guest Control Status Codes
2960 * @{
2961 */
2962/** Guest side reported an error. */
2963#define VERR_GSTCTL_GUEST_ERROR (-6200)
2964/** A guest control object has changed its overall status. */
2965#define VWRN_GSTCTL_OBJECTSTATE_CHANGED 6220
2966/** Guest process is in a wrong state. */
2967#define VERR_GSTCTL_PROCESS_WRONG_STATE (-6221)
2968/** Maximum (context ID) sessions have been reached. */
2969#define VERR_GSTCTL_MAX_CID_SESSIONS_REACHED (-6222)
2970/** Maximum (context ID) objects have been reached. */
2971#define VERR_GSTCTL_MAX_CID_OBJECTS_REACHED (-6223)
2972/** Maximum (context ID object) count has been reached. */
2973#define VERR_GSTCTL_MAX_CID_COUNT_REACHED (-6224)
2974/** Started guest process terminated with an exit code <> 0. */
2975#define VERR_GSTCTL_PROCESS_EXIT_CODE (-6225)
2976/** @} */
2977
2978
2979/** @name GIM Status Codes
2980 * @{
2981 */
2982/** No GIM provider is configured for this VM. */
2983#define VERR_GIM_NOT_ENABLED (-6300)
2984/** GIM internal processing error \#1. */
2985#define VERR_GIM_IPE_1 (-6301)
2986/** GIM internal processing error \#2. */
2987#define VERR_GIM_IPE_2 (-6302)
2988/** GIM internal processing error \#3. */
2989#define VERR_GIM_IPE_3 (-6303)
2990/** The GIM provider does not support any paravirtualized TSC. */
2991#define VERR_GIM_PVTSC_NOT_AVAILABLE (-6304)
2992/** The guest has not setup use of the paravirtualized TSC. */
2993#define VERR_GIM_PVTSC_NOT_ENABLED (-6305)
2994/** Unknown or invalid GIM provider. */
2995#define VERR_GIM_INVALID_PROVIDER (-6306)
2996/** GIM generic operation failed. */
2997#define VERR_GIM_OPERATION_FAILED (-6307)
2998/** The GIM provider does not support any hypercalls. */
2999#define VERR_GIM_HYPERCALLS_NOT_AVAILABLE (-6308)
3000/** The guest has not setup use of the hypercalls. */
3001#define VERR_GIM_HYPERCALLS_NOT_ENABLED (-6309)
3002/** The GIM device is not registered with GIM when it ought to be. */
3003#define VERR_GIM_DEVICE_NOT_REGISTERED (-6310)
3004/** Hypercall cannot be enabled/performed due to access/permissions/CPL. */
3005#define VERR_GIM_HYPERCALL_ACCESS_DENIED (-6311)
3006/** Failed to read to a memory region while performing a hypercall. */
3007#define VERR_GIM_HYPERCALL_MEMORY_READ_FAILED (-6312)
3008/** Failed to write to a memory region while performing a hypercall. */
3009#define VERR_GIM_HYPERCALL_MEMORY_WRITE_FAILED (-6313)
3010/** Generic hypercall operation failure. */
3011#define VERR_GIM_HYPERCALL_FAILED (-6314)
3012/** No debug connection configured. */
3013#define VERR_GIM_NO_DEBUG_CONNECTION (-6315)
3014/** Return to ring-3 to perform the hypercall there. */
3015#define VINF_GIM_R3_HYPERCALL 6316
3016/** Continuing hypercall at the same RIP, continue guest execution. */
3017#define VINF_GIM_HYPERCALL_CONTINUING 6317
3018/** Instruction that triggers the hypercall is invalid/unrecognized. */
3019#define VERR_GIM_INVALID_HYPERCALL_INSTR (-6318)
3020/** @} */
3021
3022
3023/** @name Main API Status Codes
3024 * @{
3025 */
3026/** The configuration constructor in main failed due to a COM error. Check
3027 * the release log of the VM for further details. */
3028#define VERR_MAIN_CONFIG_CONSTRUCTOR_COM_ERROR (-6400)
3029/** The configuration constructor in main failed due to an internal consistency
3030 * error. Consult the release log of the VM for further details. */
3031#define VERR_MAIN_CONFIG_CONSTRUCTOR_IPE (-6401)
3032/** @} */
3033
3034
3035/** @name VBox Drag and Drop Status Codes
3036 * @{
3037 */
3038/** Guest side reported an error. */
3039#define VERR_DND_GUEST_ERROR (-6500)
3040/** @} */
3041
3042
3043/** @name Audio Status Codes
3044 * @{
3045 */
3046/** Host backend couldn't be initialized. Happen if the audio server is not
3047 * reachable, audio hardware is not available or similar. We should use the
3048 * NULL audio driver. */
3049#define VERR_AUDIO_BACKEND_INIT_FAILED (-6600)
3050/** No host backend attached / available. */
3051#define VERR_AUDIO_BACKEND_NOT_ATTACHED (-6601)
3052/** No free input streams. */
3053#define VERR_AUDIO_NO_FREE_INPUT_STREAMS (-6602)
3054/** No free output streams. */
3055#define VERR_AUDIO_NO_FREE_OUTPUT_STREAMS (-6603)
3056/** Pending stream disable operation in progress. */
3057#define VERR_AUDIO_STREAM_PENDING_DISABLE (-6604)
3058/** There is more data available.
3059 * This can happen due to a buffer wraparound of a buffer read/write operation. */
3060#define VINF_AUDIO_MORE_DATA_AVAILABLE (6605)
3061/** Stream is not ready for requested operation. */
3062#define VERR_AUDIO_STREAM_NOT_READY (-6605)
3063/** Stream could not be created.
3064 * This might due to missing host (backend) drivers or a host not having the
3065 * required hardware, or that the requested stream configuration
3066 * is not supported by the host backend. */
3067#define VERR_AUDIO_STREAM_COULD_NOT_CREATE (-6606)
3068/** Generic audio device enumeration error. */
3069#define VERR_AUDIO_ENUMERATION_FAILED (-6607)
3070/** Asynchronous stream initialization still on-going. */
3071#define VERR_AUDIO_STREAM_INIT_IN_PROGRESS (-6608)
3072/** Special PDMIHOSTAUDIO::pfnStreamCreate return value for triggering
3073 * calling of PDMIHOSTAUDIO::pfnStreamInitAsync on a worker thread. */
3074#define VINF_AUDIO_STREAM_ASYNC_INIT_NEEDED (6609)
3075/** @} */
3076
3077
3078/** @name APIC Status Codes
3079 * @{
3080 */
3081/** No pending interrupt. */
3082#define VERR_APIC_INTR_NOT_PENDING (-6700)
3083/** Pending interrupt is masked by TPR. */
3084#define VERR_APIC_INTR_MASKED_BY_TPR (-6701)
3085/** APIC did not accept the interrupt. */
3086#define VERR_APIC_INTR_DISCARDED (-6702)
3087/** @} */
3088
3089/** @name NEM Status Codes
3090 * @{
3091 */
3092/** NEM is not enabled. */
3093#define VERR_NEM_NOT_ENABLED (-6800)
3094/** NEM is not available. */
3095#define VERR_NEM_NOT_AVAILABLE (-6801)
3096/** NEM init failed. */
3097#define VERR_NEM_INIT_FAILED (-6802)
3098/** NEM init failed because of missing kernel API (\#1). */
3099#define VERR_NEM_MISSING_KERNEL_API_1 (-6803)
3100/** NEM can only operate from ring-3. */
3101#define VERR_NEM_RING3_ONLY (-6804)
3102/** NEM failed to create a native VM instance. */
3103#define VERR_NEM_VM_CREATE_FAILED (-6805)
3104/** NEM failed to map page(s) into the VM. */
3105#define VERR_NEM_MAP_PAGES_FAILED (-6806)
3106/** NEM failed to unmap page(s) into the VM. */
3107#define VERR_NEM_UNMAP_PAGES_FAILED (-6807)
3108/** NEM failed to get registers. */
3109#define VERR_NEM_GET_REGISTERS_FAILED (-6808)
3110/** NEM failed to set registers. */
3111#define VERR_NEM_SET_REGISTERS_FAILED (-6809)
3112/** Get register caller must flush the TLB (not an error). */
3113#define VERR_NEM_FLUSH_TLB (-6810)
3114/** Get register caller must flush the TLB. */
3115#define VINF_NEM_FLUSH_TLB (6810)
3116/** NEM failed to set TSC. */
3117#define VERR_NEM_SET_TSC (-6811)
3118/** NEM init failed because of missing kernel API (\#2). */
3119#define VERR_NEM_MISSING_KERNEL_API_2 (-6812)
3120/** NEM init failed because of missing kernel API (\#3). */
3121#define VERR_NEM_MISSING_KERNEL_API_3 (-6813)
3122/** NEM init failed because of missing kernel API (\#4). */
3123#define VERR_NEM_MISSING_KERNEL_API_4 (-6814)
3124/** NEM init failed because of missing kernel API (\#5). */
3125#define VERR_NEM_MISSING_KERNEL_API_5 (-6815)
3126/** NEM failed to query dirty page bitmap. */
3127#define VERR_NEM_QUERY_DIRTY_BITMAP_FAILED (-6816)
3128/** NEM is missing a require feature in the host API. */
3129#define VERR_NEM_MISSING_FEATURE (-6817)
3130
3131/** NEM internal processing error \#0. */
3132#define VERR_NEM_IPE_0 (-6890)
3133/** NEM internal processing error \#1. */
3134#define VERR_NEM_IPE_1 (-6891)
3135/** NEM internal processing error \#2. */
3136#define VERR_NEM_IPE_2 (-6892)
3137/** NEM internal processing error \#3. */
3138#define VERR_NEM_IPE_3 (-6893)
3139/** NEM internal processing error \#4. */
3140#define VERR_NEM_IPE_4 (-6894)
3141/** NEM internal processing error \#5. */
3142#define VERR_NEM_IPE_5 (-6895)
3143/** NEM internal processing error \#6. */
3144#define VERR_NEM_IPE_6 (-6896)
3145/** NEM internal processing error \#7. */
3146#define VERR_NEM_IPE_7 (-6897)
3147/** NEM internal processing error \#8. */
3148#define VERR_NEM_IPE_8 (-6898)
3149/** NEM internal processing error \#9. */
3150#define VERR_NEM_IPE_9 (-6899)
3151/** @} */
3152
3153/** @name Recording Status Codes
3154 * @{
3155 */
3156/** Codec was not found. */
3157#define VERR_RECORDING_CODEC_NOT_FOUND (-6900)
3158/** Codec initialization failed. */
3159#define VERR_RECORDING_CODEC_INIT_FAILED (-6902)
3160/** Codec is not supported. */
3161#define VERR_RECORDING_CODEC_NOT_SUPPORTED (-6903)
3162/** Format not supported by the codec. */
3163#define VERR_RECORDING_FORMAT_NOT_SUPPORTED (-6904)
3164/** Recording is not possible due to a set restriction. */
3165#define VERR_RECORDING_RESTRICTED (-6905)
3166/** Recording limit (time, size, ...) has been reached. */
3167#define VINF_RECORDING_LIMIT_REACHED (6906)
3168/** Recording limit (time, size, ...) has been reached. */
3169#define VERR_RECORDING_LIMIT_REACHED (-6906)
3170/** Recording has been throttled due to current settings.
3171 * This e.g. can happen when submitting more video frames than
3172 * the current FPS setting allows. */
3173#define VINF_RECORDING_THROTTLED (6907)
3174/** Recording has been throttled due to current settings.
3175 * This e.g. can happen when submitting more video frames than
3176 * the current FPS setting allows. */
3177#define VERR_RECORDING_THROTTLED (-6907)
3178/** Encoding data failed. */
3179#define VERR_RECORDING_ENCODING_FAILED (-6908)
3180/** @} */
3181
3182/** @name Shared Clipboard Status Codes
3183 * @{
3184 */
3185/** Maximum of concurrent clipboard transfers has been reached. */
3186#define VERR_SHCLPB_MAX_TRANSFERS_REACHED (-7100)
3187/** Maximum number of Shared Clipboard objects has been reached. */
3188#define VERR_SHCLPB_MAX_OBJECTS_REACHED (-7101)
3189/** Maximum number of Shared Clipboard lists has been reached. */
3190#define VERR_SHCLPB_MAX_LISTS_REACHED (-7102)
3191/** A Shared Clipboard list handle is invalid. */
3192#define VERR_SHCLPB_LIST_HANDLE_INVALID (-7103)
3193/** A Shared Clipboard objects handle is invalid. */
3194#define VERR_SHCLPB_OBJ_HANDLE_INVALID (-7104)
3195/** Shared Clipboard event ID not found. */
3196#define VERR_SHCLPB_EVENT_ID_NOT_FOUND (-7105)
3197/** Maximum number of Shared Clipboard events for an event source has been reached. */
3198#define VERR_SHCLPB_MAX_EVENTS_REACHED (-7106)
3199/** Shared Clipboard transfer ID not found. */
3200#define VERR_SHCLPB_TRANSFER_ID_NOT_FOUND (-7150)
3201/** Shared Clipboard guest error. */
3202#define VERR_SHCLPB_GUEST_ERROR (-7151)
3203/** Shared Clipboard event failed error. */
3204#define VERR_SHCLPB_EVENT_FAILED (-7152)
3205/** @} */
3206
3207/** @name Virtual IOMMU Status Codes
3208 * @{
3209 */
3210/** Failed to read the device table entry from guest memory. */
3211#define VERR_IOMMU_DTE_READ_FAILED (-7300)
3212/** Failed to read the device table entry due to an invalid offset. */
3213#define VERR_IOMMU_DTE_BAD_OFFSET (-7301)
3214/** Address translation failed. */
3215#define VERR_IOMMU_ADDR_TRANSLATION_FAILED (-7302)
3216/** Access denied for the address. */
3217#define VERR_IOMMU_ADDR_ACCESS_DENIED (-7303)
3218/** Remapping failed for the interrupt. */
3219#define VERR_IOMMU_INTR_REMAP_FAILED (-7304)
3220/** Remapping denied for the interrupt (might have caused a PCI target abort). */
3221#define VERR_IOMMU_INTR_REMAP_DENIED (-7305)
3222/** Command not supported. */
3223#define VERR_IOMMU_CMD_NOT_SUPPORTED (-7306)
3224/** Command format (or reserved bits) invalid. */
3225#define VERR_IOMMU_CMD_INVALID_FORMAT (-7307)
3226/** Command hardware failure. */
3227#define VERR_IOMMU_CMD_HW_ERROR (-7308)
3228/** IOMMU device is not present. */
3229#define VERR_IOMMU_NOT_PRESENT (-7309)
3230/** IOMMU instance cannot call itself (for remapping interrupts or translating
3231 * addresses). */
3232#define VERR_IOMMU_CANNOT_CALL_SELF (-7310)
3233/** Address translation disabled (but permission bits apply). */
3234#define VINF_IOMMU_ADDR_TRANSLATION_DISABLED 7311
3235
3236/** IOMMU Internal processing error \#0. */
3237#define VERR_IOMMU_IPE_0 (-7390)
3238/** IOMMU Internal processing error \#1. */
3239#define VERR_IOMMU_IPE_1 (-7391)
3240/** IOMMU Internal processing error \#2. */
3241#define VERR_IOMMU_IPE_2 (-7392)
3242/** IOMMU Internal processing error \#3. */
3243#define VERR_IOMMU_IPE_3 (-7393)
3244/** IOMMU Internal processing error \#4. */
3245#define VERR_IOMMU_IPE_4 (-7394)
3246/** IOMMU Internal processing error \#5. */
3247#define VERR_IOMMU_IPE_5 (-7395)
3248/** IOMMU Internal processing error \#6. */
3249#define VERR_IOMMU_IPE_6 (-7396)
3250/** IOMMU Internal processing error \#7. */
3251#define VERR_IOMMU_IPE_7 (-7397)
3252/** IOMMU Internal processing error \#8. */
3253#define VERR_IOMMU_IPE_8 (-7398)
3254/** IOMMU Internal processing error \#9. */
3255#define VERR_IOMMU_IPE_9 (-7399)
3256/** @} */
3257
3258/** @name Platform Status Codes
3259 * @{
3260 */
3261/** The selected platform architecture is not supported.
3262 * Depends on the context (host / VM). */
3263#define VERR_PLATFORM_ARCH_NOT_SUPPORTED (-7400)
3264/** @} */
3265
3266/* SED-END */
3267
3268/** @} */
3269
3270
3271#endif /* !VBOX_INCLUDED_err_h */
3272
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette