source: vbox/trunk/include/VBox/asmdefs.mac@ 8155

;; @file
; VirtualBox YASM/NASM macros, structs, etc.
;

;
; Copyright (C) 2006-2007 Sun Microsystems, Inc.
;
; This file is part of VirtualBox Open Source Edition (OSE), as
; available from http://www.virtualbox.org. This file is free software;
; you can redistribute it and/or modify it under the terms of the GNU
; General Public License (GPL) as published by the Free Software
; Foundation, in version 2 as it comes in the "COPYING" file of the
; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
;
; The contents of this file may alternatively be used under the terms
; of the Common Development and Distribution License Version 1.0
; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
; VirtualBox OSE distribution, in which case the provisions of the
; CDDL are applicable instead of those of the GPL.
;
; You may elect to license modified versions of this file under the
; terms and conditions of either the GPL or the CDDL or both.
;
; Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
; Clara, CA 95054 USA or visit http://www.sun.com if you need
; additional information or have any questions.
;

%ifndef ___VBox_asmdefs_mac
%define ___VBox_asmdefs_mac

;; @def VBOX_WITH_STATISTICS
; When defined all statistics will be included in the build.
; This is enabled by default in all debug builds.
%ifndef VBOX_WITH_STATISTICS
 %ifdef DEBUG
  %define VBOX_WITH_STATISTICS
 %endif
%endif

%include "iprt/asmdefs.mac"



%ifndef VBOX_UART_BASE
 %ifndef IPRT_UART_BASE
  %define VBOX_UART_BASE    3f8h         ; COM1 (see src/VBox/Runtime/common/log/logcom.cpp)
 %else
  %define VBOX_UART_BASE    IPRT_UART_BASE
 %endif
%endif
%ifndef VBOX_UART_RATE
 %define VBOX_UART_RATE     12           ; 9600 bps
%endif
%ifndef VBOX_UART_PARAMS
 %define VBOX_UART_PARAMS   00000011b    ; 8n1
%endif


;;
; Initializes the com port to 9600 baud 8n1.
; al and dx are wasted.
; @todo comport init doesn't quite work - therefore we no longer use this! :-/
%macro COM_INIT 0
    push    eax
    push    edx

    mov     dx, VBOX_UART_BASE + 3
    mov     al, 80h
    out     dx, al                      ; make DL register accessible

    mov     dx, VBOX_UART_BASE
    mov     ax, VBOX_UART_RATE
    out     dx, ax                      ; write bps rate divisor

    mov     dx, VBOX_UART_BASE + 3
    mov     al, VBOX_UART_PARAMS
    out     dx, al                      ; write parameters


    xor     ax, ax
    mov     dx, VBOX_UART_BASE + 4      ; disconnect the UART from the int line
    out     dx, al

    mov     dx, VBOX_UART_BASE + 1      ; disable UART ints
    out     dx, al

    mov     dx, VBOX_UART_BASE + 2      ; disable the fifos (old software relies on it)
    out     dx, al

    mov     dx, VBOX_UART_BASE
    in      al, dx                      ; clear receiver
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx                      ; clear line status
    inc     dx
    in      al, dx                      ; clear modem status

    pop     edx
    pop     eax
%endmacro


;;
; writes string to comport
; trashes nothing (uses stack though)

%macro COM32_S_PRINT 1+
    push    esi
    push    ecx
    push    eax
    mov     ecx, edx
    shl     ecx, 16

    call    %%stringend
%%string:   db %1
%%stringend:
    pop     esi
    mov     cx, %%stringend - %%string
%%status:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status

    mov     al, [esi]
    mov     dx, VBOX_UART_BASE
    out     dx, al
    inc     esi
    dec     cx
    jnz short %%status

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    shr     ecx, 16
    mov     dx, cx
    pop     eax
    pop     ecx
    pop     esi
%endmacro

%macro COM64_S_PRINT 1+
    push    rsi
    push    rdx
    push    rcx
    push    rax

    jmp  %%stringend
%%string:   db %1
%%stringend:
    lea     rsi, [%%string wrt rip]
    mov     cx, %%stringend - %%string
%%status:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status

    mov     al, [rsi]
    mov     dx, VBOX_UART_BASE
    out     dx, al
    inc     rsi
    dec     cx
    jnz short %%status

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    pop     rax
    pop     rcx
    pop     rdx
    pop     rsi
%endmacro

%macro COM_S_PRINT 1+
%ifdef RT_ARCH_AMD64
    COM64_S_PRINT %1
%else
    COM32_S_PRINT %1
%endif
%endmacro


;; Write char.
; trashes esi
%macro COM_CHAR 1
    mov     esi, eax
    shl     esi, 16
    mov     si, dx

%%status:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status

    mov     al, %1
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    mov     dx, si
    shr     esi, 16
    mov     ax, si
%endmacro


;; Write char.
; trashes nothing (uses stack though)

%macro COM32_S_CHAR 1
    push    eax
    push    edx

%%status:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status

    mov     al, %1
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    pop     edx
    pop     eax
%endmacro

%macro COM64_S_CHAR 1
    push    rax
    push    rdx

%%status:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status

    mov     al, %1
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    pop     rdx
    pop     rax
%endmacro

%macro COM_S_CHAR 1
%ifdef RT_ARCH_AMD64
    COM64_S_CHAR %1
%else
    COM32_S_CHAR %1
%endif
%endmacro


;; Writes newline
; trashes esi
%macro COM_NEWLINE 0
    mov     esi, eax
    shl     esi, 16
    mov     si, dx

%%status1:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status1

    mov     al, 13
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    mov     al, 10
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status3:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status3

    mov     dx, si
    shr     esi, 16
    mov     ax, si
%endmacro


;; Writes newline
; trashes nothing (uses stack though)

%macro COM32_S_NEWLINE 0
    push    edx
    push    eax

%%status1:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status1

    mov     al, 13
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    mov     al, 10
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status3:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status3

    pop     eax
    pop     edx
%endmacro

%macro COM64_S_NEWLINE 0
    push    rdx
    push    rax

%%status1:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status1

    mov     al, 13
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status2:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status2

    mov     al, 10
    mov     dx, VBOX_UART_BASE
    out     dx, al

%%status3:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status3

    pop     rax
    pop     rdx
%endmacro

%macro COM_S_NEWLINE 0
%ifdef RT_ARCH_AMD64
    COM64_S_NEWLINE
%else
    COM32_S_NEWLINE
%endif
%endmacro


;; Writes a dword from register to com port.
; trashes esi, edi
; edi cannot be used as input register
%macro COM_DWORD_REG 1
    mov     edi, ebx                    ; save ebx
    mov     ebx, %1                     ; get value we're supposed to print
    mov     esi, eax                    ; save ax
    shl     esi, 16                     ; save dx
    mov     si, dx

    mov     ah, 8                       ; loop counter.
%%daloop:
    rol     ebx, 4                      ; shift next digit to the front

%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    dec     ah
    jnz short %%daloop                  ; loop

    mov     dx, si                      ; restore dx
    shr     esi, 16
    mov     ax, si                      ; restore ax
    mov     ebx, edi                    ; restore ebx
%endmacro


;; Writes a dword from register to com port.
; trashes nothing (uses stack though)

%macro COM32_S_DWORD_REG 1
    push    edx
    push    eax
    push    ebx

    mov     ebx, %1                     ; get value we're supposed to print

    mov     ah, 8                       ; loop counter.
%%daloop:
    rol     ebx, 4                      ; shift next digit to the front

%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    dec     ah
    jnz short %%daloop                  ; loop

    pop     ebx
    pop     eax
    pop     edx
%endmacro

%macro COM64_S_DWORD_REG 1
    push    rdx
    push    rax
    push    rbx

    mov     ebx, %1                     ; get value we're supposed to print

    mov     ah, 8                       ; loop counter.
%%daloop:
    rol     ebx, 4                      ; shift next digit to the front

%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    dec     ah
    jnz short %%daloop                  ; loop

    pop     rbx
    pop     rax
    pop     rdx
%endmacro

%macro COM_S_DWORD_REG 1
%ifdef RT_ARCH_AMD64
    COM64_S_DWORD_REG %1
%else
    COM32_S_DWORD_REG %1
%endif
%endmacro


;; Writes a qword from register to com port.
; trashes nothing (uses stack though)
%macro COM64_S_QWORD_REG 1
    push    rdx
    push    rax
    push    rbx

    mov     rbx, %1                     ; get value we're supposed to print

    mov     ah, 16                      ; loop counter.
%%daloop:
    rol     rbx, 4                      ; shift next digit to the front

%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    dec     ah
    jnz short %%daloop                  ; loop

    pop     rbx
    pop     rax
    pop     rdx
%endmacro


;; Writes a byte from register to com port.
; trashes nothing (uses stack though)

%macro COM32_S_BYTE_REG 1
    push    edx
    push    eax
    push    ebx

    mov     ebx, %1                     ; get value we're supposed to print

    mov     ah, 2                       ; loop counter.
    ror     ebx, 8                      ; shift next digit to the front
%%daloop:
    rol     ebx, 4                      ; shift next digit to the front

%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    dec     ah
    jnz short %%daloop                  ; loop

    pop     ebx
    pop     eax
    pop     edx
%endmacro

%macro COM64_S_BYTE_REG 1
    push    rdx
    push    rax
    push    rbx

    mov     ebx, %1                     ; get value we're supposed to print

    mov     ah, 2                       ; loop counter.
    ror     ebx, 8                      ; shift next digit to the front
%%daloop:
    rol     ebx, 4                      ; shift next digit to the front

%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    dec     ah
    jnz short %%daloop                  ; loop

    pop     rbx
    pop     rax
    pop     rdx
%endmacro

%macro COM_S_BYTE_REG 1
%ifdef RT_ARCH_AMD64
    COM64_S_BYTE_REG %1
%else
    COM32_S_BYTE_REG %1
%endif
%endmacro



;; Writes a single hex digit from register to com port.
; trashes nothing (uses stack though)

%macro COM32_S_DIGIT_REG 1
    push    edx
    push    eax
    push    ebx

    mov     ebx, %1                     ; get value we're supposed to print
%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    pop     ebx
    pop     eax
    pop     edx
%endmacro

%macro COM64_S_DIGIT_REG 1
    push    rdx
    push    rax
    push    rbx

    mov     ebx, %1                     ; get value we're supposed to print
%%status0:
    mov     dx, VBOX_UART_BASE + 5
    in      al, dx
    test    al, 20h
    jz short %%status0

    mov     al, bl                      ; get next char
    and     al, 0fh
    cmp     al, 10
    jae short %%hex                     ; yasm BUG! It sometimes generate a near jump here. YASMCHECK!
    add     al, '0'
    jmp short %%print
%%hex:
    add     al, 'a' - 10
%%print:
    mov     dx, VBOX_UART_BASE
    out     dx, al

    pop     rbx
    pop     rax
    pop     rdx
%endmacro

%macro COM_S_DIGIT_REG 1
%ifdef RT_ARCH_AMD64
    COM64_S_DIGIT_REG %1
%else
    COM32_S_DIGIT_REG %1
%endif
%endmacro


;;
; Loops for a while.
; ecx is trashed.
%macro LOOP_A_WHILE 0

    xor     ecx, ecx
    dec     ecx
    shr     ecx, 1
%%looplabel:
    nop
    nop
    nop
    dec     ecx
    jnz short %%looplabel

%endmacro


;;
; Loops for a short while.
; ecx is trashed.
%macro LOOP_SHORT_WHILE 0

    xor     ecx, ecx
    dec     ecx
    shr     ecx, 4
%%looplabel:
    nop
    nop
    dec     ecx
    jnz short %%looplabel

%endmacro

%endif