VirtualBox

Ticket #6696: dmesg.out

File dmesg.out, 25.7 KB (added by Jim Avera, 14 years ago)

Output from 'dmesg' on guest after bootup

Line 
1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
4[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=e3b6143e-98fa-4154-bc79-47230198e871 ro quiet splash
5[ 0.000000] KERNEL supported cpus:
6[ 0.000000] Intel GenuineIntel
7[ 0.000000] AMD AuthenticAMD
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] BIOS-provided physical RAM map:
10[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
11[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
12[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
13[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
14[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (ACPI data)
15[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
16[ 0.000000] DMI 2.5 present.
17[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
18[ 0.000000] MTRR default type: uncachable
19[ 0.000000] MTRR variable ranges disabled:
20[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
21[ 0.000000] CPU MTRRs all blank - virtualized system.
22[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
23[ 0.000000] Scanning 1 areas for low memory corruption
24[ 0.000000] modified physical RAM map:
25[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
26[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
27[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
28[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
29[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
30[ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable)
31[ 0.000000] modified: 000000007fff0000 - 0000000080000000 (ACPI data)
32[ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved)
33[ 0.000000] initial memory mapped : 0 - 20000000
34[ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000
35[ 0.000000] NX (Execute Disable) protection: active
36[ 0.000000] 0000000000 - 007fe00000 page 2M
37[ 0.000000] 007fe00000 - 007fff0000 page 4k
38[ 0.000000] kernel direct mapping tables up to 7fff0000 @ 8000-c000
39[ 0.000000] RAMDISK: 37800000 - 37fef144
40[ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
41[ 0.000000] ACPI: XSDT 000000007fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
42[ 0.000000] ACPI: FACP 000000007fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
43[ 0.000000] ACPI: DSDT 000000007fff0290 01A0C (v01 VBOX VBOXBIOS 00000002 INTL 20090521)
44[ 0.000000] ACPI: FACS 000000007fff01f0 00040
45[ 0.000000] ACPI: APIC 000000007fff0230 00058 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
46[ 0.000000] ACPI: Local APIC address 0xfee00000
47[ 0.000000] No NUMA configuration found
48[ 0.000000] Faking a node at 0000000000000000-000000007fff0000
49[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000
50[ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff]
51[ 0.000000] bootmap [000000000000f000 - 000000000001efff] pages 10
52[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fff0000]
53[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
54[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
55[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
56[ 0.000000] #3 [0037800000 - 0037fef144] RAMDISK ==> [0037800000 - 0037fef144]
57[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
58[ 0.000000] #5 [0001a2a000 - 0001a2a071] BRK ==> [0001a2a000 - 0001a2a071]
59[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
60[ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0
61[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
62[ 0.000000] Zone PFN ranges:
63[ 0.000000] DMA 0x00000000 -> 0x00001000
64[ 0.000000] DMA32 0x00001000 -> 0x00100000
65[ 0.000000] Normal 0x00100000 -> 0x00100000
66[ 0.000000] Movable zone start PFN for each node
67[ 0.000000] early_node_map[3] active PFN ranges
68[ 0.000000] 0: 0x00000000 -> 0x00000001
69[ 0.000000] 0: 0x00000006 -> 0x0000009f
70[ 0.000000] 0: 0x00000100 -> 0x0007fff0
71[ 0.000000] On node 0 totalpages: 524170
72[ 0.000000] DMA zone: 56 pages used for memmap
73[ 0.000000] DMA zone: 101 pages reserved
74[ 0.000000] DMA zone: 3837 pages, LIFO batch:0
75[ 0.000000] DMA32 zone: 7112 pages used for memmap
76[ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31
77[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
78[ 0.000000] ACPI: Local APIC address 0xfee00000
79[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
80[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
81[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
82[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
83[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
84[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
85[ 0.000000] ACPI: IRQ9 used by override.
86[ 0.000000] Using ACPI (MADT) for SMP configuration information
87[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
88[ 0.000000] nr_irqs_gsi: 24
89[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
90[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
91[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
92[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
93[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ffc0000)
94[ 0.000000] Booting paravirtualized kernel on bare hardware
95[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
96[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288
97[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
98[ 0.000000] pcpu-alloc: [0] 0 1 2 3
99[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516901
100[ 0.000000] Policy zone: DMA32
101[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=e3b6143e-98fa-4154-bc79-47230198e871 ro quiet splash
102[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
103[ 0.000000] Initializing CPU#0
104[ 0.000000] Checking aperture...
105[ 0.000000] No AGP bridge found
106[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
107[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
108[ 0.000000] Memory: 2048812k/2097088k available (5409k kernel code, 408k absent, 47868k reserved, 2976k data, 876k init)
109[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
110[ 0.000000] Hierarchical RCU implementation.
111[ 0.000000] NR_IRQS:4352 nr_irqs:440
112[ 0.000000] Console: colour VGA+ 80x25
113[ 0.000000] console [tty0] enabled
114[ 0.000000] allocated 20971520 bytes of page_cgroup
115[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
116[ 0.000000] Fast TSC calibration using PIT
117[ 0.000000] Detected 2672.945 MHz processor.
118[ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.89 BogoMIPS (lpj=26729450)
119[ 0.020022] Security Framework initialized
120[ 0.020034] AppArmor: AppArmor initialized
121[ 0.020234] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
122[ 0.020927] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
123[ 0.021289] Mount-cache hash table entries: 256
124[ 0.021395] Initializing cgroup subsys ns
125[ 0.021398] Initializing cgroup subsys cpuacct
126[ 0.021401] Initializing cgroup subsys memory
127[ 0.021405] Initializing cgroup subsys devices
128[ 0.021407] Initializing cgroup subsys freezer
129[ 0.021408] Initializing cgroup subsys net_cls
130[ 0.021476]
131[ 0.021491] CPU 0/0x0 -> Node 0
132[ 0.021495] CPU: Physical Processor ID: 0
133[ 0.021496] CPU: Processor Core ID: 0
134[ 0.021502] mce: CPU supports 0 MCE banks
135[ 0.021529] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
136[ 0.045182] ACPI: Core revision 20090903
137[ 0.045738] ftrace: converting mcount calls to 0f 1f 44 00 00
138[ 0.045741] ftrace: allocating 22518 entries in 89 pages
139[ 0.050136] Setting APIC routing to flat
140[ 0.060510] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
141[ 0.163255] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
142[ 0.170000] APIC calibration not consistent with PM-Timer: 101ms instead of 100ms
143[ 0.170000] APIC delta adjusted to PM-Timer: 6144485 (6250225)
144[ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000
145[ 0.030000] Initializing CPU#1
146[ 0.030000]
147[ 0.030000] CPU 1/0x1 -> Node 0
148[ 0.030000] CPU: Physical Processor ID: 0
149[ 0.030000] CPU: Processor Core ID: 1
150[ 0.030000] mce: CPU supports 0 MCE banks
151[ 0.320056] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
152[ 0.320067] checking TSC synchronization [CPU#0 -> CPU#1]:
153[ 0.330000] Measured 42247 cycles TSC warp between CPUs, turning off TSC clock.
154[ 0.330000] Marking TSC unstable due to check_tsc_sync_source failed
155[ 0.340257] Booting processor 2 APIC 0x2 ip 0x6000
156[ 0.030000] Initializing CPU#2
157[ 0.030000]
158[ 0.030000] CPU 2/0x2 -> Node 0
159[ 0.030000] CPU: Physical Processor ID: 0
160[ 0.030000] CPU: Processor Core ID: 2
161[ 0.030000] mce: CPU supports 0 MCE banks
162[ 0.500135] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
163[ 0.500328] Booting processor 3 APIC 0x3 ip 0x6000
164[ 0.030000] Initializing CPU#3
165[ 0.030000]
166[ 0.030000] CPU 3/0x3 -> Node 0
167[ 0.030000] CPU: Physical Processor ID: 0
168[ 0.030000] CPU: Processor Core ID: 3
169[ 0.030000] mce: CPU supports 0 MCE banks
170[ 0.660262] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
171[ 0.660330] Brought up 4 CPUs
172[ 0.660332] Total of 4 processors activated (20863.28 BogoMIPS).
173[ 0.660945] CPU0 attaching sched-domain:
174[ 0.660948] domain 0: span 0-3 level CPU
175[ 0.660950] groups: 0 1 2 3
176[ 0.660955] CPU1 attaching sched-domain:
177[ 0.660956] domain 0: span 0-3 level CPU
178[ 0.660958] groups: 1 2 3 0
179[ 0.660961] CPU2 attaching sched-domain:
180[ 0.660962] domain 0: span 0-3 level CPU
181[ 0.660963] groups: 2 3 0 1
182[ 0.660966] CPU3 attaching sched-domain:
183[ 0.660968] domain 0: span 0-3 level CPU
184[ 0.660969] groups: 3 0 1 2
185[ 0.661065] devtmpfs: initialized
186[ 0.661065] regulator: core version 0.5
187[ 0.661065] Time: 19:13:54 Date: 05/14/10
188[ 0.661065] NET: Registered protocol family 16
189[ 0.661065] ACPI: bus type pci registered
190[ 0.661065] Trying to unpack rootfs image as initramfs...
191[ 0.661065] PCI: Using configuration type 1 for base access
192[ 0.661065] bio: create slab <bio-0> at 0
193[ 0.661203] ACPI: EC: Look up EC in DSDT
194[ 0.671377] ACPI: Interpreter enabled
195[ 0.671380] ACPI: (supports S0 S5)
196[ 0.671391] ACPI: Using IOAPIC for interrupt routing
197[ 0.672987] ACPI: No dock devices found.
198[ 0.673051] ACPI: PCI Root Bridge [PCI0] (0000:00)
199[ 0.674233] pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
200[ 0.676971] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
201[ 0.676976] pci 0000:00:03.0: reg 10 io port: [0xd020-0xd03f]
202[ 0.676982] pci 0000:00:03.0: reg 14 32bit mmio: [0xf0000000-0xf0000fff]
203[ 0.676987] pci 0000:00:03.0: reg 18 32bit mmio: [0xf0080000-0xf00fffff]
204[ 0.678896] pci 0000:00:04.0: reg 10 io port: [0xd040-0xd05f]
205[ 0.678972] pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
206[ 0.679023] pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff]
207[ 0.679328] pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
208[ 0.679368] pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
209[ 0.680162] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
210[ 0.681105] pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0805000-0xf0805fff]
211[ 0.681488] pci 0000:00:0d.0: reg 10 io port: [0xd240-0xd247]
212[ 0.681570] pci 0000:00:0d.0: reg 18 io port: [0xd250-0xd257]
213[ 0.681652] pci 0000:00:0d.0: reg 20 io port: [0xd260-0xd26f]
214[ 0.681720] pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0806000-0xf0807fff]
215[ 0.681931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
216[ 0.683744] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
217[ 0.683999] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
218[ 0.684082] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
219[ 0.684164] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
220[ 0.684261] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
221[ 0.684265] vgaarb: loaded
222[ 0.684338] SCSI subsystem initialized
223[ 0.684391] libata version 3.00 loaded.
224[ 0.684391] usbcore: registered new interface driver usbfs
225[ 0.684391] usbcore: registered new interface driver hub
226[ 0.684391] usbcore: registered new device driver usb
227[ 0.684391] ACPI: WMI: Mapper loaded
228[ 0.684391] PCI: Using ACPI for IRQ routing
229[ 0.684391] NetLabel: Initializing
230[ 0.684391] NetLabel: domain hash size = 128
231[ 0.684391] NetLabel: protocols = UNLABELED CIPSOv4
232[ 0.684391] NetLabel: unlabeled traffic allowed by default
233[ 0.684391] AppArmor: AppArmor Filesystem Enabled
234[ 0.684391] pnp: PnP ACPI init
235[ 0.684391] ACPI: bus type pnp registered
236[ 0.684391] pnp: PnP ACPI: found 5 devices
237[ 0.684391] ACPI: ACPI bus type pnp unregistered
238[ 0.692480] Switching to clocksource acpi_pm
239[ 0.692480] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
240[ 0.692480] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
241[ 0.692480] NET: Registered protocol family 2
242[ 0.692480] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
243[ 0.692480] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
244[ 0.692480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
245[ 0.692673] TCP: Hash tables configured (established 262144 bind 65536)
246[ 0.692675] TCP reno registered
247[ 0.692732] NET: Registered protocol family 1
248[ 0.692742] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
249[ 0.692757] pci 0000:00:01.0: Activating ISA DMA hang workarounds
250[ 0.692768] pci 0000:00:02.0: Boot video device
251[ 0.693061] platform rtc_cmos: registered platform RTC device (no PNP device found)
252[ 0.693279] Scanning for low memory corruption every 60 seconds
253[ 0.693369] audit: initializing netlink socket (disabled)
254[ 0.693376] type=2000 audit(1273864433.690:1): initialized
255[ 0.701602] HugeTLB registered 2 MB page size, pre-allocated 0 pages
256[ 0.703888] VFS: Disk quotas dquot_6.5.2
257[ 0.703940] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
258[ 0.704572] fuse init (API version 7.13)
259[ 0.704634] msgmni has been set to 4001
260[ 0.705681] alg: No test for stdrng (krng)
261[ 0.705764] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
262[ 0.705766] io scheduler noop registered
263[ 0.705767] io scheduler anticipatory registered
264[ 0.705769] io scheduler deadline registered
265[ 0.705793] io scheduler cfq registered (default)
266[ 0.705843] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
267[ 0.705857] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
268[ 0.705952] ACPI: AC Adapter [AC] (on-line)
269[ 0.706003] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
270[ 0.706006] ACPI: Power Button [PWRF]
271[ 0.706080] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
272[ 0.706082] ACPI: Sleep Button [SLPF]
273[ 0.706167] processor LNXCPU:00: registered as cooling_device0
274[ 0.706187] processor LNXCPU:01: registered as cooling_device1
275[ 0.706209] processor LNXCPU:02: registered as cooling_device2
276[ 0.706230] processor LNXCPU:03: registered as cooling_device3
277[ 0.707897] Linux agpgart interface v0.103
278[ 0.707914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
279[ 0.708861] brd: module loaded
280[ 0.709284] loop: module loaded
281[ 0.709335] input: Macintosh mouse button emulation as /devices/virtual/input/input2
282[ 0.709385] ata_piix 0000:00:01.1: version 2.13
283[ 0.709758] scsi0 : ata_piix
284[ 0.709976] scsi1 : ata_piix
285[ 0.710006] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
286[ 0.710008] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
287[ 0.710391] Fixed MDIO Bus: probed
288[ 0.710413] PPP generic driver version 2.4.2
289[ 0.710437] tun: Universal TUN/TAP device driver, 1.6
290[ 0.710438] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
291[ 0.710539] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
292[ 0.710570] alloc irq_desc for 19 on node -1
293[ 0.710572] alloc kstat_irqs on node -1
294[ 0.710631] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
295[ 0.710671] ehci_hcd 0000:00:0b.0: EHCI Host Controller
296[ 0.710700] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
297[ 0.710941] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000
298[ 0.732817] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
299[ 0.733038] usb usb1: configuration #1 chosen from 1 choice
300[ 0.733068] hub 1-0:1.0: USB hub found
301[ 0.733081] hub 1-0:1.0: 8 ports detected
302[ 0.733214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
303[ 0.733246] alloc irq_desc for 22 on node -1
304[ 0.733252] alloc kstat_irqs on node -1
305[ 0.733282] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
306[ 0.733314] ohci_hcd 0000:00:06.0: OHCI Host Controller
307[ 0.733345] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
308[ 0.733557] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
309[ 0.791161] usb usb2: configuration #1 chosen from 1 choice
310[ 0.791182] hub 2-0:1.0: USB hub found
311[ 0.791233] hub 2-0:1.0: 8 ports detected
312[ 0.791692] uhci_hcd: USB Universal Host Controller Interface driver
313[ 0.791745] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
314[ 0.792433] serio: i8042 KBD port at 0x60,0x64 irq 1
315[ 0.792456] serio: i8042 AUX port at 0x60,0x64 irq 12
316[ 0.792516] mice: PS/2 mouse device common for all mice
317[ 0.792957] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
318[ 0.793140] rtc0: alarms up to one day, 114 bytes nvram
319[ 0.793327] device-mapper: uevent: version 1.0.3
320[ 0.793370] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
321[ 0.793741] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
322[ 0.794457] device-mapper: multipath: version 1.1.0 loaded
323[ 0.794460] device-mapper: multipath round-robin: version 1.0.0 loaded
324[ 0.795613] cpuidle: using governor ladder
325[ 0.795615] cpuidle: using governor menu
326[ 0.795872] TCP cubic registered
327[ 0.795970] NET: Registered protocol family 10
328[ 0.796366] lo: Disabled Privacy Extensions
329[ 0.796550] NET: Registered protocol family 17
330[ 0.796770] PM: Resume from disk failed.
331[ 0.796778] registered taskstats version 1
332[ 0.797047] Magic number: 10:229:243
333[ 0.797199] rtc_cmos rtc_cmos: setting system clock to 2010-05-14 19:13:54 UTC (1273864434)
334[ 0.797203] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
335[ 0.797204] EDD information not available.
336[ 0.808703] Freeing initrd memory: 8124k freed
337[ 0.866896] ata1.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
338[ 0.867356] ata1.00: configured for UDMA/33
339[ 0.867941] scsi 0:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
340[ 0.869910] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
341[ 0.869912] Uniform CD-ROM driver Revision: 3.20
342[ 0.869986] sr 0:0:0:0: Attached scsi CD-ROM sr0
343[ 0.870026] sr 0:0:0:0: Attached scsi generic sg0 type 5
344[ 0.870160] Freeing unused kernel memory: 876k freed
345[ 0.870280] Write protecting the kernel read-only data: 7680k
346[ 0.894350] udev: starting version 151
347[ 0.920554] ahci 0000:00:0d.0: version 3.0
348[ 0.920576] alloc irq_desc for 21 on node -1
349[ 0.920577] alloc kstat_irqs on node -1
350[ 0.920604] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
351[ 0.920662] ahci: SSS flag set, parallel bus scan disabled
352[ 0.920780] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
353[ 0.920783] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
354[ 0.923852] scsi2 : ahci
355[ 0.924013] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
356[ 1.275587] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
357[ 1.276674] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
358[ 1.276697] ata3.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
359[ 1.277060] ata3.00: configured for UDMA/133
360[ 1.277284] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
361[ 1.277668] sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
362[ 1.277637] sd 2:0:0:0: Attached scsi generic sg1 type 0
363[ 1.277766] sd 2:0:0:0: [sda] Write Protect is off
364[ 1.277771] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
365[ 1.277825] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
366[ 1.278004] sda: sda1 sda2 < sda5 >
367[ 1.278983] sd 2:0:0:0: [sda] Attached SCSI disk
368[ 1.281979] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
369[ 1.282025] pcnet32 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
370[ 1.282112] pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:62:51:f7 assigned IRQ 19.
371[ 1.282283] pcnet32: Found PHY 0022:561b at address 0.
372[ 1.283601] eth0: registered as PCnet/FAST III 79C973
373[ 1.283681] pcnet32: 1 cards_found.
374[ 1.321675] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
375[ 1.321680] EXT4-fs (sda1): write access will be enabled during recovery
376[ 1.335174] EXT4-fs (sda1): recovery complete
377[ 1.335519] EXT4-fs (sda1): mounted filesystem with ordered data mode
378[ 3.380419] Adding 407544k swap on /dev/sda5. Priority:-1 extents:1 across:407544k
379[ 3.388600] udev: starting version 151
380[ 3.402673] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
381[ 3.413978] vga16fb: initializing
382[ 3.413981] vga16fb: mapped to 0xffff8800000a0000
383[ 3.414074] fb0: VGA16 VGA frame buffer device
384[ 3.470982] lp: driver loaded but no devices found
385[ 3.475296] type=1505 audit(1273864437.172:2): operation="profile_load" pid=459 name="/sbin/dhclient3"
386[ 3.475731] type=1505 audit(1273864437.172:3): operation="profile_load" pid=459 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
387[ 3.475977] type=1505 audit(1273864437.172:4): operation="profile_load" pid=459 name="/usr/lib/connman/scripts/dhclient-script"
388[ 3.503526] parport_pc 00:04: reported by Plug and Play ACPI
389[ 3.505122] alloc irq_desc for 20 on node -1
390[ 3.505124] alloc kstat_irqs on node -1
391[ 3.505160] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
392[ 3.510966] vboxguest: Successfully loaded version 3.1.6 (interface 0x00010004)
393[ 3.536319] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
394[ 3.538237] ppdev: user-space parallel port driver
395[ 3.589546] Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
396[ 4.180117] intel8x0_measure_ac97_clock: measured 59772 usecs (12064 samples)
397[ 4.180119] intel8x0: measured clock 201833 rejected
398[ 4.551443] intel8x0_measure_ac97_clock: measured 60012 usecs (11115 samples)
399[ 4.551445] intel8x0: measured clock 185212 rejected
400[ 4.605224] Console: switching to colour frame buffer device 80x30
401[ 5.083507] intel8x0_measure_ac97_clock: measured 58632 usecs (11124 samples)
402[ 5.083509] intel8x0: measured clock 189725 rejected
403[ 5.083511] intel8x0: clocking to 48000
404[ 7.915670] eth0: link up, 100Mbps, full-duplex
405[ 7.924428] type=1505 audit(1273864441.622:5): operation="profile_load" pid=747 name="/usr/share/gdm/guest-session/Xsession"
406[ 7.929256] type=1505 audit(1273864441.622:6): operation="profile_replace" pid=750 name="/sbin/dhclient3"
407[ 7.929632] type=1505 audit(1273864441.622:7): operation="profile_replace" pid=750 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
408[ 7.929836] type=1505 audit(1273864441.622:8): operation="profile_replace" pid=750 name="/usr/lib/connman/scripts/dhclient-script"
409[ 7.932921] type=1505 audit(1273864441.632:9): operation="profile_load" pid=756 name="/usr/bin/evince"
410[ 7.937939] type=1505 audit(1273864441.632:10): operation="profile_load" pid=756 name="/usr/bin/evince-previewer"
411[ 7.941579] type=1505 audit(1273864441.643:11): operation="profile_load" pid=756 name="/usr/bin/evince-thumbnailer"
412[ 7.946466] type=1505 audit(1273864441.643:12): operation="profile_load" pid=762 name="/usr/lib/cups/backend/cups-pdf"
413[ 7.946917] type=1505 audit(1273864441.643:13): operation="profile_load" pid=762 name="/usr/sbin/cupsd"
414[ 7.948478] type=1505 audit(1273864441.643:14): operation="profile_load" pid=764 name="/usr/sbin/tcpdump"
415[ 8.070287] vboxvfs: Successfully loaded version 3.1.6 (interface 0x00010004)
416[ 8.072162] sf_read_super_aux err=-71
417[ 9.083783] [drm] Initialized drm 1.1.0 20060810
418[ 9.085082] alloc irq_desc for 18 on node -1
419[ 9.085084] alloc kstat_irqs on node -1
420[ 9.085112] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
421[ 9.085282] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
422[ 18.561097] eth0: no IPv6 routers present

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette